Introduction: The mechanical properties of biocompatible printable resin materials in an intraoral environment is still being investigated. This study aimed to assess the effect of the aging process on the mechanical properties of resin samples produced by stereolithography appearance (SLA) and digital light processing (DLP) 3-dimensional printer systems.
Methods: The cylindrical sample (4.00 × 20.00 mm) was designed by software, and the data were transformed into digital format. A DLP printer (n = 40) and an SLA printer (n = 40) carried out the printing process. The aging procedure was applied to 20 samples from each group using a thermocycling device. After the aging procedure, the samples were placed in the universal testing device for the 3-point bending test.
Results: This study showed that the aging procedure decreased maximum load, bending stress, and Young's modulus values and increased maximum deflection values of the DLP group (P <0.01). However, no statistical difference was detected in the parameters compared with the SLA group except for the maximum deflection values. Furthermore, statistically significant differences were found between maximum deflection and Young's module values of SLA and DLP control and study groups (P <0.05).
Conclusions: This in vitro study revealed that the biocompatible printable resin materials produced by DLP and SLA printers had the mechanical strength to resist the values resembling the physiological occlusal forces even after the aging procedure and could produce intraoral appliances.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ajodo.2023.05.023 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Curdlan inclusion modifies the rheological properties and the helix-coil transition behavior of gelatin and increases the flexibility of gelatin films.
Food Chem
December 2024
College of Food Science and Engineering, Qingdao Agricultural University, Qingdao, Shandong 266109, China; School of Light Industry, Beijing Technology & Business University (BTBU), Beijing 100048, China; Shandong Ensign Industry Co., Ltd., Weifang, Shandong 262409, China. Electronic address:
Gelatin, a natural and edible polymer, has attracted wide attention for use in food and edible packaging applications. However, its inadequate properties, especially poor flexibility, limit its broader utilization. Hybridizing different polymers is a promising strategy to achieve enhanced properties.
View Article and Find Full Text PDFAdvances in nanomaterials for radiation protection in the aerospace industry: a systematic review.
Nanotechnology
December 2024
CCTS/DFQM, UFSCar - Campus Sorocaba, Rod. João Leme dos Santos km 110 - SP-264 Bairro do Itinga - Sorocaba CEP 18052-780, Sorocaba, 18052-780, BRAZIL.
Nanomaterials stand out for their exceptional properties and innovative potential, especially in applications that protect against space radiation. They offer an innovative approach to this challenge, demonstrating notable properties of radiation absorption and scattering, as well as flexibility and lightness for the development of protective clothing and equipment. This review details the use of polymeric materials, such as polyimides (PIs), which are efficient at attenuating ultraviolet (UV) radiation and atomic oxygen (AO).
View Article and Find Full Text PDFHydrogen Bonding Polarization Strengthening the Peptide-Based Hydrogels.
J Phys Chem B
December 2024
Research Institute of Interdisciplinary Science & School of Materials Science and Engineering, Dongguan University of Technology, Dongguan 523808, China.
Peptide-based hydrogels form a kind of promising material broadly used in biomedicine and biotechnology. However, the correlation between their hydrogen bonding dynamics and mechanical properties remains uncertain. In this study, we found that the adoption of β-sheet and α-helix secondary structures by ECF-5 and GFF-5 peptides, respectively, could further form fiber networks to immobilize water molecules into hydrogels.
View Article and Find Full Text PDFComputer-aided design of caffeic acid derivatives: free radical scavenging activity and reaction force.
J Mol Model
December 2024
Departamento de Química, Universidad Autónoma Metropolitana-Iztapalapa, Avenida Ferrocarril San Rafael Atlixco, Número 186, Colonia Leyes de Reforma 1A Sección, Alcaldía Iztapalapa, Código Postal 09310, Ciudad de Mexico, Mexico.
Context: Antioxidants are known to play a beneficial role in human health. Caffeic acid has been previously recognized as efficient in this context. However, such a capability can be enhanced through structural modification.
View Article and Find Full Text PDFMechanically Robust, Superlubricating and Antifouling Bilayer Nanocoating for Micro-Bioimplants via a Dual-Function Metal Coordination Approach.
ACS Nano
December 2024
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada.
Nanometer-thick ultrathin coatings with superior mechanical strength and desirable lubricating and antifouling performance are critical for the miniaturization of implantable medical devices. However, integrating these properties at the nanoscale remains challenging due to the inherent trade-off between mechanical strength and hydration as well as limitations in coating thickness. In this work, we address these challenges by employing dual-function metal coordination to construct a ∼25 nm thick bilayer structure.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!