Organic loading influences the effectiveness of producing biogas through anaerobic digestion. This study set out to investigate the effect of organic loading on the anaerobic mesophilic digestion of cow dung, the parameters involved in the digestion process and to evaluate the kinetics. Anaerobic digestion of cow dung at different organic loading (gVS/L) of 14 gVS/L, 18gVS/L, 22 gVS/L, 26 gVS/L and 30 gVS/L were investigated. Increasing the organic loading increased the methane yield of the cow dung. The highest cumulative methane yield was observed at 30 gVS/L with 63.42 mL CH/gVS while the highest biogas yield was reported at 192.53 mL/gVS with the highest methane content of 89%. In addition, the modified Gompertz model equation with an R of 0.9980 demonstrated strong consistency and a good fit between predicted and experimental data. The high number of substrates added to the systems when increasing the organic loading increased the λ and slow down the nutrient transport and hydrolysis. This study provides current information on the effects of organic loading on the anaerobic digestion of cow dung in batch mode, including experimental conditions and operational parameters.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10250787 | PMC |
http://dx.doi.org/10.1016/j.heliyon.2023.e16791 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181 - UCCS - Unité de Catalyse et Chimie du Solide, Lille F-59000, France.
Metal-organic frameworks (MOFs) combined with polymers as hybrid materials offer numerous advantages such as enhanced performances through synergistic effects at their interface. The primary challenge in developing polymer/MOF hybrid matrix films is ensuring optimal dispersion and strong adhesion of crystalline MOFs to the polymer without aggregation, weak interaction, or phase separation. In this study, hierarchically porous UiO-66_NH/chitosan (ZrCSx-) films were designed by crystallizing UiO-66_NH within a chitosan (CS) skeleton.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Pharmaceutical Technology, National Institute of Pharmaceutical Education and Research (NIPER) S.A.S. Nagar, Mohali, Punjab 160062, India. Electronic address:
Customized nano-biocatalysts of laccase have been made using nano-structured polyaniline viz. nano-fibers and nano-tubes, as immobilization supports and a simultaneous comparison between them has been made. Laccases are poly-phenol oxidases having tremendous utility concerning wider areas of application especially in the field of organic and drug syntheses.
View Article and Find Full Text PDFThe present study demonstrates the significance of the C/N ratio and double helical ribbon (DHR) impeller in the anaerobic co-digestion (AnCo-D) of sugar refining process (SRP) effluent and molasses-based distillery spent wash (DSW) for improved biogas production. Both SRP & DSW were mixed in different percentages to achieve an optimum C/N ratio. Further biomethane potential analysis of mixed feeds with different C/N ratios was performed.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Ian Potter NanoBiosensing Facility, NanoBiotechnology Research Laboratory, School of Science, RMIT University, Melbourne, Victoria 3000, Australia.
Metal-organic frameworks (MOFs) provide diverse applications across a wide range of scientific disciplines, including drug/nucleic acid (NA) delivery. In the subclass of MOFs, zeolitic imidazolate framework-8 (ZIF-8) is well regarded due to its exceptional physicochemical properties. Biomolecules can be encapsulated and released under precise conditions within ZIF, making it an important material for materials science and biomedical applications.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Central Pollution Control Board, MoEF & CC, Government of India, New Delhi, India.
The swift industrial expansion has posed significant environmental challenges, particularly in the context of water pollution. Industrial effluents consist of substantial amounts of harmful pollutants that enter the main rivers via various tapped and untapped drains/local water streams, causing alterations in their physical and chemical properties. This study investigated 153 grossly polluting industries (GPIs) that were identified to release their effluents into the main rivers through different drains within multiple sectors in the industrial zone of four northern states of India in 2023.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!