A number of textile-based fiber optic sensors have recently been proposed for the continuous monitoring of vital signs. However, some of these sensors are likely unsuitable for conducting direct measurements on the torso as they lack elasticity and are inconvenient. This project provides a novel method for creating a force-sensing smart textile by inlaying four silicone-embedded fiber Bragg grating sensors into a knitted undergarment. The applied force was determined within 3 N after transferring the Bragg wavelength. The results show that the sensors embedded in the silicone membranes achieved enhanced sensitivity to force, as well as flexibility and softness. Additionally, by assessing the degree of FBG response to a range of standardized forces, the linearity (R) between the shift in the Bragg wavelength and force was found to be above 0.95, with an ICC of 0.97, when tested on a soft surface. Furthermore, the real-time data acquisition could facilitate the adjustment and monitoring of force during the fitting processes, such as in bracing treatment for adolescent idiopathic scoliosis patients. Nevertheless, the optimal bracing pressure has not yet been standardized. This proposed method could help orthotists to adjust the tightness of brace straps and the location of padding in a more scientific and straightforward way. The output of this project could be further extended to determine ideal bracing pressure levels.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10255815 | PMC |
| http://dx.doi.org/10.3390/s23115145 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Magnetically programmed diffractive robotics.
Science
November 2024
Laboratory of Atomic and Solid-State Physics, Cornell University, Ithaca, NY, USA.
Microscopic robots with features comparable with the wavelength of light offer new ways of probing the microscopic world and controlling light at the microscale. We introduce a new class of magnetically controlled microscopic robots (microbots) that operate at the visible-light diffraction limit, which we term diffractive robots. We combined nanometer-thick mechanical membranes, programmable nanomagnets, and diffractive optical elements to create untethered microbots small enough to diffract visible light and flexible enough to undergo complex reconfigurations in millitesla-scale magnetic fields.
View Article and Find Full Text PDFA wearable conductive hydrogel with triple network reinforcement inspired by bio-fibrous scaffolds for real-time quantitatively sensing compression force exerted on fruit surface.
J Adv Res
September 2024
College of Agriculture and Biotechnology/Zhejiang Provincial Key Laboratory of Horticultural Plant Integrative Biology/Key Laboratory of Ministry of Agriculture and Rural Affairs of Biology and Genetic Improvement of Horticultural Crops (Growth and Development), Zhejiang University, Hangzhou 310058, PR China.
Introduction: Mechanical stresses incurred during post-harvest fruit storage and transportation profoundly impact decay and losses. Currently, the monitoring of mechanical forces is primarily focused on vibrational forces experienced by containers and vehicles and impact forces affecting containers. However, the detection of compressive forces both among interior fruit and between fruit and packaging surfaces remains deficient.
View Article and Find Full Text PDFCalibrating Low-Cost Smart Insole Sensors with Recurrent Neural Networks for Accurate Prediction of Center of Pressure.
Sensors (Basel)
July 2024
School of Electrical Engineering, Korea Advanced Institute of Science & Technology, Daejeon 34141, Republic of Korea.
This paper proposes a scheme for predicting ground reaction force (GRF) and center of pressure (CoP) using low-cost FSR sensors. GRF and CoP data are commonly collected from smart insoles to analyze the wearer's gait and diagnose balance issues. This approach can be utilized to improve a user's rehabilitation process and enable customized treatment plans for patients with specific diseases, making it a useful technology in many fields.
View Article and Find Full Text PDFSensor-Enhanced Smart Gripper Development for Automated Meat Processing.
Sensors (Basel)
July 2024
University Research and Innovation Center, Óbuda University, 1034 Budapest, Hungary.
Grasping and object manipulation have been considered key domains of Cyber-Physical Systems (CPS) since the beginning of automation, as they are the most common interactions between systems, or a system and its environment. As the demand for automation is spreading to increasingly complex fields of industry, smart tools with sensors and internal decision-making become necessities. CPS, such as robots and smart autonomous machinery, have been introduced in the meat industry in recent decades; however, the natural diversity of animals, potential anatomical disorders and soft, slippery animal tissues require the use of a wide range of sensors, software and intelligent tools.
View Article and Find Full Text PDFSingle-cavity loss-enabled nanometrology.
Nat Nanotechnol
October 2024
College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha, China.
Optical monitoring of the position and alignment of objects with a precision of only a few nanometres is key in applications such as smart manufacturing and force sensing. Traditional optical nanometrology requires precise nanostructure fabrication, multibeam interference or complex postprocessing algorithms, sometimes hampering wider adoption of this technology. Here we show a simplified, yet robust, approach to achieve nanometric metrology down to 2 nm resolution that eliminates the need for any reference signal for interferometric measurements.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!