AI Article Synopsis

  • * Some sunscreens were found to contain unlisted fragrance compounds, and five specific VOC contaminants, including benzene and toluene, were identified, indicating potential health risks from inhalation.
  • * Emission rates of commonly released VOCs were measured, revealing a wide range of outputs, with up to 30 mg of ethanol being inhaled from a single facial application depending on the user's age and sex.

Article Abstract

The speciation of volatile organic compounds (VOCs) emitted from personal care products (PCPs) is complex and contributes to poor air quality and health risks to users via the inhalation exposure pathway. Detailed VOC emission profiles were generated for 26 sunscreen products; consequently, variability was observed between products, even though they were all designed for the same purpose. Some were found to contain fragrance compounds not labelled on their ingredients list. Five contaminant VOCs were identified (benzene, toluene, ethylbenzene, o-xylene, and p-xylene); headspace sampling of an additional 18 randomly selected products indicated that ethanol originating from fossil petroleum was a potential source. The gas phase emission rates of the VOCs were quantified for 15 of the most commonly emitted species using SIFT-MS. A wide range of emission rates were observed between the products. Usage estimates were made based on the recommended dose per body surface area, for which the total mass of VOCs emitted from one full-body application dose was in the range of 1.49 × 10-4.52 × 10 mg and 1.35 × 10-4.11 × 10 mg for facial application (men aged 16+; children aged 2-4). Depending on age and sex, an estimated 9.8-30 mg of ethanol is inhaled from one facial application of sunscreen.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10252547PMC
http://dx.doi.org/10.3390/ijerph20115944DOI Listing

Publication Analysis

Top Keywords

gas phase
8
volatile organic
8
organic compounds
8
vocs emitted
8
observed products
8
emission rates
8
facial application
8
products
5
phase emissions
4
emissions volatile
4

Similar Publications

Ascertaining the Environmental Advantages of Pavement Designs Incorporating Recycled Content through a Parametric and Probabilistic Approach.

Environ Sci Technol

January 2025

College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, 300350 Tianjin, China.

Reclaimed asphalt pavement (RAP) is a widely used end-of-life (EoL) material in asphalt pavements to increase the material circularity. However, the performance loss due to using RAP in the asphalt binder layer often requires a thicker layer, leading to additional material usage, energy consumption, and transportation effort. In this study, we developed a parametric and probabilistic life cycle assessment (LCA) framework to robustly compare various pavement designs incorporating recycled materials.

View Article and Find Full Text PDF

Achieving the adsorptive separation and chromatographic separation of industrially the important chemicals toluene and methylcyclohexane using the same material is a highly desirable goal. We have successfully accomplished this using a fluorinated macrocycle tetrafluoroterphen[3]arene (4FTP3), which was synthesized and used for gas chromatographic separation in our previous work. The macrocycle 4FTP3 permitted the adsorptive separation of toluene from a toluene/methylcyclohexane mixture (1:1, v/v) with a purity of 99.

View Article and Find Full Text PDF

High-Performance Hydrogen Sensing at Room Temperature via Nb-Doped Titanium Oxide Thin Films Fabricated by Micro-Arc Oxidation.

Nanomaterials (Basel)

January 2025

Guangdong Key Laboratory of Materials and Equipment in Harsh Marine Environment, School of Ocean Engineering, Guangzhou Maritime University, Guangzhou 510725, China.

Metal oxide semiconductor (MOS) hydrogen sensors offer advantages, such as high sensitivity and fast response, but their challenges remain in achieving low-cost fabrication and stable operation at room temperature. This study investigates Nb-doped TiO (NTO) thin films prepared via a one-step micro-arc oxidation (MAO) with the addition of NbO nanoparticles into the electrolyte for room-temperature hydrogen sensing. The characterization results revealed that the incorporation of NbO altered the film's morphology and phase composition, increasing the Nb content and forming a homogeneous composite thin film.

View Article and Find Full Text PDF

Underlying Mechanisms of Chromatographic H/D, H/F, and Isomerism Effects in GC-MS.

Metabolites

January 2025

Institute of Toxicology, Core Unit Proteomics, Hannover Medical School, 30623 Hannover, Germany.

Charge-free gaseous molecules labeled with deuterium H (D) atoms elute earlier than their protium-analogs H (H) from most stationary GC phases. This effect is known as the chromatographic H/D isotope effect (IE) and can be calculated by dividing the retention times () of the protiated ( ) to those of the deuterated () analytes: IE = /. Analytes labeled with C, N or O have almost identical retention times and lack a chromatographic isotope effect.

View Article and Find Full Text PDF

The large-scale implementation of 2D material-based membranes is hindered by mechanical stability and mass transport control challenges. This work describes the fabrication, characterisation, and testing of self-standing graphene oxide (GO) membranes cross-linked with oxides such as FeO, AlO, CaSO, NbO, and a carbide, SiC. These cross-linking agents enhance the mechanical stability of the membranes and modulate their mass transport properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!