Cobalt-doped titania nanocomposites were fabricated to be utilized for radiation shielding aims. The chemical composition of the composites was measured using the energy-dispersive X-ray spectrometer. Moreover, the structure of the composites was evaluated using the X-ray diffractometer, and the morphology of the fabricated composites was presented using the scanning electron microscope. Furthermore, the γ-ray shielding properties were estimated using the Monte Carlo simulation between 0.059 and 2.506 MeV. The linear attenuation coefficient of the fabricated composites decreased by factors of 93% for all samples by raising the incident γ-energy between 0.059 and 2.506 MeV. Moreover, the partial replacement of the Ti by Co slightly enhanced the linear attenuation coefficient from 0.607 to 0.630 cm when the Co increased from 0 to 3.7 wt%. The improvement in the linear attenuation coefficient causes an enhancement in other radiation shielding properties.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10235060 | PMC |
| http://dx.doi.org/10.1038/s41598-023-33864-y | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Compliance with radiation protection among radiographers in Eswatini public health facilities.
Health SA
December 2024
Department of Radiography, Faculty of Health Science, Durban University of Technology, Durban, South Africa.
Background: The consequence of non-compliance with patient radiation safety standards increases unnecessary radiation exposure with high chances of harmful biological effects. Radiographers are trained to prevent these harmful effects by enforcing radiation protection, which is achieved through proper techniques, equipment, shielding materials and beam collimation.
Aim: The study aimed to explore compliance with radiation protection by radiographers in Eswatini public health facilities (PHFs).
Use of 3D Printing Technology to Improve Lead Shield Fabrication for Electron Therapy of the Face.
Pract Radiat Oncol
January 2025
Department of Radiation Oncology, Christiana Care, Helen F. Graham Cancer Center & Research Institute, Newark, Delaware.
Superficial lesions of the face are often treated with an electron beam and surface collimation utilizing a conformal lead shield with an opening around the region of treatment (ROT). To fabricate the lead shield, an imprint of the patient face is needed. Historically, this was achieved using a laborious and time-consuming process that involved a gypsum imprinted model (GIM) of the patient topography.
View Article and Find Full Text PDFUltralight and Flexible Subnanowire Aerogels for Intrinsically Hydrophobic Thermal Insulation.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Xiangtan University, Xiangtan, Hunan 411105, P. R. China.
Aerogels are regarded as the next generation of thermal insulators; however, conventional aerogels suffer from issues such as brittleness, low moisture resistance, and a complex production process. Subnanowires (SNWs) are emerging materials known for their exceptional flexibility, toughness, intrinsic hydrophobicity, and gelling capabilities, making them ideal building blocks for flexible, tough, hydrophobic, and thermally insulating aerogels. Herein, we present a simple and scalable strategy to construct SNW aerogels by freeze-drying hydroxyapatite (HAP) SNW dispersions in cyclohexane.
View Article and Find Full Text PDFA Prospective Study of a Custom-Made Eco-Friendly Thyroid Shield: A Breakthrough in Radiation Protection.
Cureus
December 2024
Department of Oral Medicine and Radiology, Drs Sudha and Nageswara Rao Siddhartha Institute of Dental Sciences, Vijayawada, IND.
Background The thyroid gland is the most susceptible organ to radiation during the exposure of teeth because the thyroid area appears to be within the primary beam, and the dose levels are relatively high even after using collimation. This study aims to develop an eco-friendly thyroid shield by reusing lead foils from intra-oral periapical radiographic films and evaluate its effectiveness in intraoral radiography. Methods A total of 16 patients undergoing endodontic procedures who gave written consent to participate in the study were included and divided into four categories: anterior, canine, premolar, and molar.
View Article and Find Full Text PDFUltraviolet-Shielded Transparent Wood with Improved Interface for Insulating Windows.
ACS Appl Mater Interfaces
January 2025
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Forestry University, Beijing 100083, China.
Recently, transparent wood (TW) has been considered for many energy-efficient building products, such as windows and decorations. However, the existing TW still faces issues with size and thickness, as well as problems with functional fillers affecting the optical and mechanical properties of TW, which limits its wide application in the window products. In this study, a wood composite material (WCM) with good optical, mechanical, and thermal insulation and UV-shielding properties was prepared by using delignified wood (DW), methyl methacrylate (MMA), and 4-vinylphenylboric acid (VPBA).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!