Mechanical Properties of High-Strength Self-Compacting Concrete.

In this research work, the mechanical properties of high-strength self-compacting concrete (HSSCC) were studied. Three mixes were selected, having compressive strengths of more than 70, 80, and 90 MPa, respectively. For these three mixes, the stress-strain characteristics were studied by casting cylinders. It was observed during the testing that the binder content and water-to-binder ratio influence the strength of HSSCC, and slow changes in stress-strain curves were seen as the strength increased. The use of HSSCC results in reduced bond cracking, leading to a more linear and steeper stress-strain curve in the ascending branches as the strength of the concrete increases. Elastic properties such as modulus of elasticity and Poisson's ratio of HSSCC were calculated using experimental data. In HSSCC, since the aggregate content is lower and the size of the aggregates is smaller, it will have a lower modulus of elasticity compared to normal vibrating concrete (NVC). Thus, an equation is proposed from the experimental results for predicting the modulus of elasticity of HSSCC. The results suggest that the proposed equation for predicting the elastic modulus of HSSCC for strengths ranging from 70 to 90 MPa is valid. It was also observed that the Poisson's ratio values for all three mixes of HSSCC were found to be lower than the typical value for NVC, indicating a higher degree of stiffness.