Surabaya is one of the big coastal cities in Indonesia with rapid municipal development. Thus, the investigation on the metal's geochemical speciation in the coastal sediment is required to assess the environmental quality by studying their mobility, bioavailability, and toxicity. This study is aimed at evaluating the condition of the Surabaya coast by assessing copper and nickel fractionations and total concentrations of both metals in sediments. Environmental assessments were performed by using geo-accumulation index (Igeo), contamination factor (CF), and pollution load index (PLI) for existing total heavy metal data and by using individual contamination factor (ICF) and risk assessment code (RAC) for metal fractionations. Copper speciation was observed geochemically in the fraction order of residual (9.21 - 40.08 mg/kg) > reducible (2.33 - 11.98 mg/kg) > oxidizable (0.75 - 22.71 mg/kg) > exchangeable (0.40 - 2.06 mg/kg), while the detected fraction order of nickel was residual (5.16 - 13.88 mg/kg) > exchangeable (2.33 - 5.95 mg/kg) > reducible (1.42 - 4.74 mg/kg) > oxidizable (1.62 - 3.88 mg/kg). Different fraction levels were found for nickel speciation wherein its exchangeable fraction was higher than copper, even though the residual fraction was dominant for both copper and nickel. The total metal concentrations of copper and nickel were found in the range of 13.5 - 66.1 mg/kg dry weight and 12.7 - 24.7 mg/kg dry weight, respectively. Despite the fact that almost all index values are detected low through total metal assessment, the port area is indicated to be in the moderate contamination category for copper. Through the assessment of metal fractionation, copper is classified into the low contamination and low-risk category, while nickel is categorized into the moderate contamination level and medium risk to the aquatic environment. Although the coast of Surabaya generally remains in the safe category for living habitat, certain sites had relatively high metal concentrations estimated to have originated from anthropogenic activities.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s11356-023-27711-w | DOI Listing |
Toxics
December 2024
College of Environmental Science and Engineering, Tongji University, Siping Road, Shanghai 200092, China.
At present, contamination due to toxic metals is a global concern. The management of problems caused by heavy metals relies on stabilization/solidification, which is the most effective technique for the control of metal pollution in soil. This study examined the immobilization efficiency of various phosphate-based binders (NaPO, NaHPO, NaHPO), in addition to ordinary Portland cement (OPC), MgO, and CaO, for the stabilization of multi-metal-contaminated soils.
View Article and Find Full Text PDFJ Contam Hydrol
January 2025
International Joint Laboratory on Synthetic Biology and Biomass Biorefinery, Biofuels Institute, School of Emergency Management, School of the Environment and Safety Engineering, Jiangsu University, Jiangsu, Zhenjiang 212013, China; Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment, Suzhou University of Science and Technology, Suzhou 215009, China. Electronic address:
The concern of potential toxic elements (PTEs) contamination in the river ecosystem is growing due to anthropological activity. The contents of seven PTEs in sediments from the Balu River channel were analyzed using atomic absorption spectroscopy (AAS) and an environmental risk model. Several PTEs were found in the sediment at high levels, including zinc (Zn), copper (Cu), arsenic (As), lead (Pb), cadmium (Cd), nickel (Ni), and mercury (Hg), that might pose a risk to human and ecological health.
View Article and Find Full Text PDFJ Orthod Sci
November 2024
Department of Orthodontics, Indira Gandhi Institute of Dental Sciences, Pondicherry, India.
Background/objective: Resolution of crowding remains a chief concern for patients seeking orthodontic treatment. The choice of the initial aligning archwire is crucial for achieving treatment success. Nickel-titanium (NiTi) archwires have been the first choice since their introduction.
View Article and Find Full Text PDFSci Rep
January 2025
College of Material Science and Engineering, Henan Institute of Technology, Xinxiang, 453003, China.
A rivet of aluminum and auxiliary gasket of nickel were adopted to weld A1060 aluminum plate and T2 copper plate using resistance element welding. The interfacial microstructure was analyzed and the tensile shear load of the joint was tested. A layer of AlCu and the eutectic structure of AlCu and (Al) were formed in the interfacial zone of Al/Cu.
View Article and Find Full Text PDFSci Rep
January 2025
School of Information and Control Engineering, Qingdao University of Technology, Qingdao, 266520, China.
Land resources are vital for urban development and construction. Abandoned industrial areas often contain large amounts of heavy metals from past industrial activities. Accurate knowledge of soil pollutant content and spatial distribution is crucial to avoid health risks and achieve sustainable soil use.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!