We propose and validate a new, to the best of our knowledge, approach to designing a polarization-independent waveguide grating coupler, using an optimized polysilicon overlay on a silicon grating structure. Simulations predicted coupling efficiencies of about -3.6 dB and -3.5 dB for TE and TM polarizations, respectively. The devices were fabricated using photolithography in a multi-project wafer fabrication service by a commercial foundry and have measured coupling losses of -3.96 dB for TE polarization and -3.93 dB for TM polarization.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.471717 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Highly-efficient full-color holographic movie based on silicon nitride metasurface.
Nanophotonics
April 2024
Department of Bio-Functions and Systems Science, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588 Japan.
Metasurface holograms offer various advantages, including wide viewing angle, small volume, and high resolution. However, full-color animation of high-resolution images has been a challenging issue. In this study, a full-color dielectric metasurface holographic movie with a resolution of 2322 × 2322 was achieved by spatiotemporally multiplexing 30 frames with blue, green, and red color channels at the wavelengths of 445 nm, 532 nm, and 633 nm at the maximum reconstruction speed of 55.
View Article and Find Full Text PDFA broadband polarization-independent infrared photon upconversion scheme based on nanophotonic waveguides on the lithium niobate on insulator (LNOI) platform is proposed. With the introduction of higher-order-mode dispersion engineering, polarization-independent and broadband photon upconversion with a maximum bandwidth of nearly 46 nm is achieved in this device. The proposed broadband polarization-independent photon upconversion structure shows great potential applications in on-chip infrared photon detection and nonlinear photonics.
View Article and Find Full Text PDFFiber-to-chip coupling is an essential issue for taking high-performance integrated photonic devices into practical applications. On a thin-film lithium niobate platform, such a high-performance coupler featuring low loss, large bandwidth, and polarization independence is highly desired. However, the mode hybridization induced by the birefringence of lithium niobate seriously restricts a polarization-independent coupling.
View Article and Find Full Text PDFIn this work, we report the realization of a polarization-insensitive grating coupler, single-mode waveguide, and ring resonator in the GaN-on-sapphire platform. We provide a detailed demonstration of the material characterization, device simulation, and experimental results. We achieve a grating coupler efficiency of -5.
View Article and Find Full Text PDFThe electrical bandwidth of an electro-optic modulator plays a vital role in determining the throughput of an optical communications link. We propose a broadband plasmonic electro-optic modulator operating at telecommunications wavelengths (λ ∼ 1550 nm), based on free carrier dispersion in indium tin oxide (ITO). The ITO is driven through its epsilon-near-zero point within the accumulation layers of metal-oxide-semiconductor (MOS) structures.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!