Oxidized zirconium was first introduced in total hip arthroplasty procedures to merge the strengths of metal and ceramic into one prosthetic. The subsequent adoption of oxidized zirconium (oxinium) for total knee arthroplasty is attributed to the theory of causing less wear on the tibial components compared to the alternative, cobalt chromium. However, the superficial layer of the femoral component is occasionally breached, exposing the softer zirconium substrate. Multiple mechanisms leading to zirconium substrate exposure have been explained, including collateral ligament instability and polyethylene wear. Such a failure may lead to damage to the periprosthetic tissues and often requires a revision procedure. In the current case report, we present a case of bilateral total knee arthroplasty with oxidized zirconium components that resulted in catastrophic failure and subsequent revision with hinged knee prostheses.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10192679 | PMC |
| http://dx.doi.org/10.1016/j.artd.2023.101144 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Zirconium-doped iron oxide nanoparticles for enhanced peroxidase-like activity.
Talanta
January 2025
College of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian 463000, PR China. Electronic address:
FeO nanoparticles (NPs) have emerged as pioneering nanozymes with applications in clinical diagnosis, environmental protection and biosensing. However, it is currently limited by insufficient catalytic activity due to poor electron transfer. In this study, we synthesized electron-rich-Zr-doped defect-rich FeO NPs (ZrFeO) using a one-pot solvothermal method.
View Article and Find Full Text PDFOptical properties of repaired additively manufactured resin composites and zirconia and subtractively manufactured ceramics: a comparative study of composite resins.
BMC Oral Health
January 2025
Department of Orthodontics, Faculty of Dentistry, Biruni University, İstanbul, Turkey.
Objective: This study aims to examine color properties of repairs made with various composites on restorations produced through additive-manufactured resin composites (AM-RC) and zirconia (AM-Z) or subtractive manufacturing (SM) after coffee thermocycling (CTC).
Materials And Methods: Disk-shaped specimens (Ø10 × 2 mm; N = 120) were fabricated using six different material groups: additively manufactured resin composite (AM-RC) materials (Crowntec [C], NextDent [ND]), additively manufactured zirconia (AM-Z) materials (Lithoz [LI], INNI-Cera [IN]), and subtractively manufactured (SM) materials (CEREC Tessera [ALD], Vita Enamic [EN]). Subsequently, each group was further subdivided into two subgroups (n = 10) based on the type of repair using two different composites resins: Clearfil Majesty Posterior (CL) (n = 60) and Filtek Z350 (FZ) (n = 60).
Physicochemical properties and biological interaction of calcium silicate-based sealers - in vivo model.
Clin Oral Investig
January 2025
Department of Restorative Dentistry - Endodontics, Faculdade de Odontologia de Piracicaba, Universidade Estadual de Campinas, Piracicaba, SP, Brazil.
Objectives: To investigate volumetric changes, in vivo biocompatibility, and systemic migration from eight commercial endodontic sealer materials in paste/paste, powder/liquid, and pre-mixed forms.
Materials And Methods: The sealers AH Plus Bioceramic, AH Plus Jet, BioRoot RCS, MTApex, Bio-C Sealer, Bio-C Sealer Ion+, EndoSequence BC Sealer and NeoSEALER Flo were studied. After characterisation by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Raman spectroscopy and X-ray diffractometry (XRD), tubes were implanted in Wistar rats' alveolar bone and subcutaneous tissues.
Marginal Fit and Fracture Resistance of Vertical Versus Horizontal Margins in Monolithic Zirconia Crowns.
Clin Exp Dent Res
February 2025
Department of Prosthodontics, Faculty of Dentistry, Ibb University, Yemen.
Objective: The use of vertical margin design in all-ceramic restoration has generated inquiries regarding its clinical efficacy under diverse dynamic oral conditions. This research aims to assess the marginal fit and fracture resistance of monolithic zirconia crowns featuring vertical margin design as opposed to those with conventional horizontal margin design.
Materials And Methods: Two metal dies were employed to generate replicated resin dies mimicking mandibular first molar preparation.
Immediate Patient Satisfaction with Dental Esthetics After Endodontic and Prosthodontic Treatment of Dental Dyschromia.
Dent J (Basel)
January 2025
Center for Advanced Technologies in Dental Prosthodontics, Department of Dental Prostheses Technology (Dental Technology), Faculty of Dental Medicine, "Victor Babeș" University of Medicine and Pharmacy Timișoara, Eftimie Murgu Square No. 2, 300041 Timișoara, Romania.
This study aimed to evaluate patients' satisfaction with the esthetic outcomes of combined endodontic and prosthetic treatments for devitalized or dyschromic teeth, a condition influenced by various intrinsic and extrinsic factors that present a growing concern in modern dentistry. A total of 104 patients, including 43 men and 61 women, underwent treatment using lithium disilicate restorations for esthetic zones and zirconium oxide restorations for regions with higher occlusal demands. Patient satisfaction was evaluated through a post-treatment questionnaire, classifying responses as either "satisfied" or "dissatisfied".
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!