AI Article Synopsis

  • - The text discusses a high-risk waterborne parasitic pathogen that has resilient oocysts, highlighting the need for more efficient detection methods than current lengthy and labor-intensive techniques.
  • - A novel electrochemical microfluidic aptasensor using specially designed 3D gold nano-/microislands and aptamers is proposed, allowing for rapid and highly selective detection of the pathogens in various sample types within just 40 minutes.
  • - Testing showed the aptasensor's strong performance, achieving a low detection limit and high selectivity; results aligned with traditional microscopy and molecular methods, indicating a promising new tool for public health monitoring.

Article Abstract

is a high-risk and opportunistic waterborne parasitic pathogen with highly infectious oocysts that can survive harsh environmental conditions for long periods. Current state-of-the-art methods are limited to lengthy imaging and antibody-based detection techniques that are slow, labor-intensive, and demand trained personnel. Therefore, the development of new sensing platforms for rapid and accurate identification at the point-of-care (POC) is essential to improve public health. Herein, we propose a novel electrochemical microfluidic aptasensor based on hierarchical 3D gold nano-/microislands (NMIs), functionalized with aptamers specific to . We used aptamers as robust synthetic biorecognition elements with a remarkable ability to bind and discriminate among molecules to develop a highly selective biosensor. Also, the 3D gold NMIs feature a large active surface area that provides high sensitivity and a low limit of detection (LOD), especially when they are combined with aptamers,. The performance of the NMI aptasensor was assessed by testing the biosensor's ability to detect different concentrations of oocysts spiked in different sample matrices, i.e., buffer, tap water, and stool, within 40 min detection time. The electrochemical measurements showed an acceptable LOD of 5 oocysts mL in buffer medium, as well as 10 oocysts mL in stool and tap water media, over a wide linear range of 10-100,000 oocysts mL. Moreover, the NMI aptasensor recognized oocysts with high selectivity while exhibiting no significant cross-reactivity to other related coccidian parasites. The specific feasibility of the aptasensor was further demonstrated by the detection of the target in patient stool samples. Our assay showed coherent results with microscopy and real-time quantitative polymerase chain reaction, achieving high sensitivity and specificity with a significant signal difference ( < 0.001). Therefore, the proposed microfluidic electrochemical biosensor platform could be a stepping stone for the development of rapid and accurate detection of parasites at the POC.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acssensors.2c01349DOI Listing

Publication Analysis

Top Keywords

electrochemical microfluidic
8
rapid accurate
8
high sensitivity
8
nmi aptasensor
8
tap water
8
detection
6
oocysts
6
aptamer-based electrochemical
4
microfluidic biosensor
4
biosensor detection
4

Similar Publications

In this study, we realized a real-time and enzyme-free measurement of lactate in sweat in the same way as an enzyme-based amperometric method. A conductive polymer, which is based on polyaniline (PANI), was strongly coated on a glassy carbon electrode as a poly -aminophenylboronic acid (PANI-PBA) membrane by drop-casting, which is a convenient method, owing to adhesive phytic acid (PA) molecules with negative charges included as a dopant. This polymer membrane had a functional structure with PBA in the PANI main chain, which expectedly induced electrical charges upon diol binding to lactate, owing to the formation of deprotonated boronate esters with negative charges.

View Article and Find Full Text PDF

Eco-sustainable point-of-care devices: Progress in paper and fabric based electrochemical and colorimetric biosensors.

Talanta

December 2024

Department of Sensor and Biomedical Technology, School of Electronics Engineering (SENSE), Vellore Institute of Technology, Vellore, 632014, India. Electronic address:

Monitoring real-time health conditions is a rinsing demand in a pandemic prone era. Wearable Point-of-Care (POC) devices with paper and fabric-based sensors are emerging as simple, low-cost, portable, and disposable analytical tools for development of green POC devices (GPOCDs). Capabilities of passive fluid transportation, compatibility with biochemical analytes, disposability and high degree of tunability using vivid device fabrication strategies enables development of highly sensitive and economically feasible POC sensors in particularly post COVID-19 pandemic outbreak.

View Article and Find Full Text PDF

The upcoming era of flexible and wearable electronics necessitates the development of low-cost, flexible, biocompatible substrates amenable to the fabrication of active devices such as electronic devices, sensors and transducers. While natural biopolymers such as Silk are robust and biocompatible, long-term flexibility is a concern due to the inherent brittle nature of soft Silk thin films. This work elucidates the preparation and characterization of Silk-polyurethane (Silk-PU) composite film that provides long-duration flexibility.

View Article and Find Full Text PDF

NSE Protein Detection in a Microfluidic Channel Integrated an Electrochemical Biosensor.

Biomed Phys Eng Express

December 2024

Electronics and Telecommunications, VNU University of Engineering and Technology, 144 Xuan Thuy, Cau Giay, Hanoi, 100000, VIET NAM.

This study proposed a microfluidic chip for the detection and quantification of NSE proteins, aimed at developing a rapid point-of-care testing system for early lung cancer diagnosis. The proposed chip structure integrated an electrochemical biosensor within a straight PDMS microchannel, enabling a significant reduction in sample volume. Additionally, a method was developed to deposit silver and silver chloride layers onto the reference electrode.

View Article and Find Full Text PDF

A stand-alone and point-of-care electrochemical immuno-device for Salmonella typhimurium testing.

Talanta

December 2024

Key Laboratory of Polyoxometalate and Reticular Material Chemistry of Ministry of Education, Key Laboratory of Nanobiosensing and Nanobioanalysis at Universities of Jilin Province, Analysis and Testing Center, Department of Chemistry, Northeast Normal University, Changchun, Jilin Province, 130024, China. Electronic address:

The rapid development of accurate and point-of-care diagnostic tools for foodborne diseases has made a massive impact in global health. Salmonella typhimurium (S. typhimurium) exemplifies an enteric pathogen, being a gram-negative bacteria responsible for several gastrointestinal and systemic illnesses.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!