The present study evaluated the effect of ultrasonication prior to microwave heating applied at 60 °C, 70 °C, and 80 °C on the quality characteristics of verjuice. The sole microwave heating and conventional heating were also performed at the same temperature levels, and effectiveness of three different treatments were evaluated. The required treatment times were decided based on obtaining <10% pectin methylesterase (PME) activity, and ultrasound pretreatment provided the least heating durations. Turbidity, browning index, and viscosity values increased by 3.4 to 14.8-fold, 0.24 to 1.26-fold, and 9.2% to 48.0%, respectively, after all thermal treatments, while Brix values decreased by 1.4% to 15.7%. Ultrasound pretreatment revealed relatively lower browning index in all temperature levels, and almost the highest viscosity values were obtained in sonication pretreated microwave heating as compared with sole microwave and conventional heating. The minimum turbidity value (0.035) was determined in ultrasound-assisted microwave heating at 60 °C. The highest antioxidant capacity (DPPH and ABTS) values were achieved by ultrasound-assisted microwave heating (up to 4.96 and 28.4 mmol Trolox equivalent (TE)/kg, respectively) followed by microwave heating (up to 4.30 and 27.0 mmol TE/kg) and conventional heating (up to 3.72 and 26.8 mmol TE/kg). Furthermore, ultrasonication resulted in better retentions of PME residual activity during 60 days of refrigerated storage (4 °C). Ultrasound pretreatment prior to microwave heating could be a convenient approach for juice processing by reducing the required treatment time and by conserving the quality parameters.

Download full-text PDF

Source
http://dx.doi.org/10.1177/10820132231176580DOI Listing

Publication Analysis

Top Keywords

microwave heating
12
processing verjuice
4
verjuice ultrasound-assisted
4
ultrasound-assisted microwave
4
heating
4
heating assessment
4
assessment enzyme
4
enzyme activity
4
activity retention
4
retention technological
4

Similar Publications

Aflatoxin B (AFB) is a highly toxic, carcinogenic, teratogenic, and mutagenic mycotoxin commonly found in corn. In this work, water-assisted microwave irradiation (WMI) was used to degrade AFB in corn, during which the influencing factors and kinetics of AFB degradation were also studied. The results showed that the degree of corn crushing, the heating rate of WMI, the temperature of WMI, the solid-liquid ratio, the initial content of AFB and the microwave power were all important factors affecting the degradation of AFB.

View Article and Find Full Text PDF

Microwave synthesis of molybdenum disulfide quantum dots and the application in bilirubin sensing.

Methods Appl Fluoresc

January 2025

Department of Obstetrics and Gynecology, Shengjing Hospital of China Medical University, No.36 Sanhao Street, Heping District, Shenyang, Liaoning Province, China, Shenyang, 110004, CHINA.

Molybdenum disulfide quantum dots (MoS2 QDs) is a new type of graphite like nanomaterial, which exhibited well chemical stability, unique fluorescence characteristics, and excellent biocompatibility. The conventional hydrothermal synthesis of MoS2 generally requires a long-term reaction at high temperature and high pressure. Herein, we have developed a simple and fast MoS2 QDs synthesis scheme using microwave heating, and further modified the surface of MoS2 QDs using 3-aminophenylboronic acid.

View Article and Find Full Text PDF

The EFSA Panel on Food Contact Materials (FCM) assessed the safety of the recycling process NGR LSP (EU register number RECYC328). The input is hot washed and dried poly(ethylene terephthalate) (PET) flakes mainly originating from collected post-consumer PET containers, with no more than 5% PET from non-food consumer applications. The flakes are dried (step 2), melted in an extruder (step 3) and decontaminated during a melt-state polycondensation step under high temperature and vacuum (step 4).

View Article and Find Full Text PDF

Microwave synthesis of molybdenum disulfide quantum dots and the application in bilirubin sensing.

Methods Appl Fluoresc

January 2025

Department of Obstetrics and Gynecology, Shengjing Hospital of China Medical University, No.36 Sanhao Street, Heping District, Shenyang, Liaoning Province, China, Shenyang, 110004, CHINA.

Molybdenum disulfide quantum dots (MoS2 QDs) is a new type of graphite like nanomaterial, which exhibited well chemical stability, unique fluorescence characteristics, and excellent biocompatibility. The conventional hydrothermal synthesis of MoS2 generally requires a long-term reaction at high temperature and high pressure. Herein, we have developed a simple and fast MoS2 QDs synthesis scheme using microwave heating, and further modified the surface of MoS2 QDs using 3-aminophenylboronic acid.

View Article and Find Full Text PDF

Herein, we present a sustainable and atom-economical approach for the synthesis of quinazolinones via acceptorless dehydrogenative coupling (ADC) using earth-abundant Co-salt, (CoCl2) as the catalyst under neat condition. This method is distinguished by its green credentials, like, solvent-free, microwave-assisted heating, cost-effective, use of renewable alcohols, and generating only H2 and water as byproducts. Remarkably, this protocol achieves quinazolinone synthesis without the need for external ligands, oxidants, or additional additives.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!