The effects of coal metakaolin on the mechanical properties of high-belite sulphoaluminate cement under compressive loading were investigated. The composition and microstructure of hydration products at different hydration times were analyzed by X-ray diffraction and scanning electronic microscopy. The hydration process of blended cement was studied via electrochemical impedance spectroscopy. In particular, replacing a part of cement with CMK (10%, 20%, and 30%) was found to promote the hydration process, to refine the pore size, and to improve the compressive strength of the composite. The best compressive strength of the cement was achieved at a CMK content of 30% after 28 days hydration, being improved by 20.13 MPa, or 1.44 times relative to that of undoped specimens. Furthermore, the compressive strength is shown to correlate with the impedance parameter , which allows the latter to be used for nondestructive assessment of the compressive strength of blended cement materials.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10162849 | PMC |
| http://dx.doi.org/10.1007/s11595-023-2703-7 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
FRESH extrusion 3D printing of type-1 collagen hydrogels photocrosslinked using ruthenium.
PLoS One
January 2025
The Henry M. Jackson Foundation for the Advancement of Military Medicine, Inc., Bethesda, Maryland, United States of America.
The extrusion bioprinting of collagen material has many applications relevant to tissue engineering and regenerative medicine. Freeform Reversible Embedding of Suspended Hydrogels (FRESH) technology is capable of 3D printing collagen material with the specifications and details needed for precise tissue guidance, a crucial requirement for effective tissue repair. While FRESH has shown repeated success and reliability for extrusion printing, the mechanical properties of completed collagen prints can be improved further by post-print crosslinking methodologies.
View Article and Find Full Text PDFEffect of Build Orientation on Mechanical and Physical Properties of Additively Manufactured Resins Using Digital Light Processing Technology in Dentistry: A Systematic Review.
J Contemp Dent Pract
September 2024
Department of Prosthodontics, Bharati Vidyapeeth (Deemed to be University) Dental College and Hospital, Sangli, Maharashtra, India, ORCID: https://orcid.org/0000-0002-6661-0931.
Aim: The aim of this systematic review was to evaluate the effect of build orientation on the mechanical and physical properties of additively manufactured resin using digital light processing (DLP).
Background: The properties of 3D-printed materials are influenced by various factors, including the type of additive manufacturing (AM) system and build orientation. There is a scarcity of literature on the effect of build orientation on the mechanical and physical properties of additively manufactured resins using DLP technology in dentistry.
Engineering performance and environmental assessment of sustainable concrete incorporating nano silica and metakaolin as cementitious materials.
Sci Rep
January 2025
School of Civil Engineering, Vellore Institute of Technology, Chennai, Tamil Nadu, 600127, India.
The carbon footprint associated with cement production, coupled with depletion of natural resources and climate change, underscores the need for sustainable alternatives. This study explores the effect of metakaolin (MK) and nano-silica (NS) on concrete's engineering performance and environmental impact. Initially, compressive, tensile, and flexural strength tests, along with durability assessments like water absorption, sorptivity, rapid chloride permeability, and resistance to acid and sulphate attacks, were conducted.
View Article and Find Full Text PDFTechnological evaluation of stones from the eastern region of the state of São Paulo, Brazil, for railway ballast.
Sci Rep
January 2025
LECIV - Civil Engineering Laboratory, UENF - State University of the North in Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes, Rio de Janeiro, 28013-602, RJ, Brazil.
The correct choice of a stone aggregate for railway ballast is directly related to the stability, safety, efficiency, and maintenance costs of the track. The aggregate must meet several criteria to ensure it is the most appropriate material. Thus, the present study aimed to evaluate four distinct stones: two granites, a diabase, and a basalt, all mined in the eastern region of the state of São Paulo, Brazil, regarding their applicability as ballast.
View Article and Find Full Text PDFFinite element investigation for improving chest wall reconstruction process using ceramic and polymeric implants.
Sci Rep
January 2025
Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.
Car accidents, infections caused by bacteria or viruses, metastatic lesions, tumors, and malignancies are the most frequent causes of chest wall damage, leading to the removal of the affected area. After excision, artificial bone or synthetic materials are used in chest wall reconstruction to restore the skeletal structure of the chest. Chest implants have traditionally been made from metallic materials like titanium alloys due to their biocompatibility and durability.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!