The reported antimony selenide (SbSe) photodetectors (PDs) are still far away from color camera applications mainly due to the high operation temperature required in chemical vapor deposition (CVD) and the lack of high-density PD arrays. In this work, we propose a SbSe/CdS/ZnO PD created by physical vapor deposition (PVD) operated at room temperature. Using PVD, a uniform film can be obtained, so the optimized PD has excellent photoelectric performance with high responsivity (250 mA/W), high detectivity (5.6 × 10 Jones), low dark current (∼10 A), and short response time (rise: < 200 μs; decay: < 200 μs). With the help of advanced computational imaging technology, we successfully demonstrate color imaging applications by the single SbSe PD; thus, we expect this work can bring SbSe PDs in color camera sensors closer.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.487169 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Facile CVD Fabrication of Vertically Aligned MoS Nanosheets with Embedded MoO on Molybdenum for High-Performance Binder-Free Lithium-Ion Battery Anodes.
ACS Omega
December 2024
2D Materials and Devices Laboratory, Department of Physics and Nanotechnology, SRM Institute of Science and Technology, Kattankulathur 603 203, Tamil Nadu, India.
The demand for compact energy storage devices necessitates the development of high-performance anode materials directly integrated with current collectors, minimizing or eliminating the need for binders or additives. With its layered structure and high theoretical capacity, molybdenum disulfide (MoS) is regarded as a promising anode material for lithium-ion batteries (LIBs). Here, we report chemical vapor deposition (CVD) growth of self-integrated, vertically aligned MoS nanosheets with embedded molybdenum dioxide (MoO) directly on a molybdenum foil and explore its potential as an anode material for LIBs.
View Article and Find Full Text PDFEnhancing Optical and Electrical Performances via Nanocrystalline Si-Based Thin Films for Si Heterojunction Solar Cells.
ACS Omega
December 2024
Institute of Photoelectronic Thin Film Devices and Technology, Nankai University, Tianjin 300350, China.
Silicon heterojunction (SHJ) solar cells, as one of the most promising passivated contact solar cell technologies of the next generation, have the advantages of high conversion efficiency, high open-circuit voltage, low-temperature coefficient, and no potential-induced degradation. For the single-side rear-emitter SHJ solar cells, the n-type carrier selective layer, which serves as the light-incident side, plays a pivotal role in determining the performance of heterojunction devices. Consequently, a superior n-doped layer should exhibit high optical transmittance and minimal optical absorption, along with a substantial effective doping level to guarantee the formation of dark conductivity (σ) and electron-transport capacity.
View Article and Find Full Text PDFSynthesis and Characterization of Optically Transparent and Electrically Conductive Mo-Doped ZnO, F-Doped ZnO, and Mo/F-Codoped ZnO Thin Films via Aerosol-Assisted Chemical Vapor Deposition.
Cryst Growth Des
December 2024
Materials Chemistry Center, Department of Chemistry, University College London, 20 Gordon Street, London WC1H 0AJ, U.K.
Mo-doped ZnO (MZO), F-doped ZnO (FZO), and Mo/F-codoped ZnO (MFZO) films have been deposited using a simple, cheap, and effective thin-film preparation route, aerosol-assisted chemical vapor deposition (AACVD). ZnO was successfully doped with Mo and/or F, confirmed by X-ray photoelectron spectroscopy (XPS) and by a decrease in unit cell parameters from X-ray diffraction (XRD). XRD also confirmed that all of the films had hexagonal wurtzite ZnO structures.
View Article and Find Full Text PDFControllable Synthesis of Magnetic 2D Non-Layered Cobalt Sulfide Nanocrystals Using Chemical Vapor Deposition.
Small
December 2024
SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea.
Among 2-dimensional (2D) non-layered transition-metal chalcogenides (TMCs), cobalt sulfides are highly interesting because of their diverse structural phases and unique properties. The unique magnetic properties of TMCs have generated significant interest in their potential applications in future spintronic devices. In addition, their high conductivity, large specific surface area, and abundant active sites have attracted attention in the field of catalysis.
View Article and Find Full Text PDFDesign of Chemoresponsive Liquid Crystals Using Metal-Coordinating Polymer Surfaces.
ACS Appl Mater Interfaces
December 2024
Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York 14853, United States.
Liquid crystals (LCs), when interfaced with chemically functionalized surfaces, can amplify a range of chemical and physical transformations into optical outputs. While metal cation-binding sites on surfaces have been shown to provide a basis for the design of chemoresponsive LCs, the cations have been found to dissociate from the surfaces and dissolve slowly into LCs, resulting in time-dependent changes in the properties of LC-solid interfaces (which impacts the reliability of devices incorporating such surfaces). Here, we explore the use of surfaces comprising metal-coordinating polymers to minimize the dissolution of metal cations into LCs and characterize the impact of the interfacial environment created by the coordinating polymer on the ordering and time-dependent properties of LCs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!