Acoustical properties of various materials were analyzed in order to determine their potential for the utilization in the three-dimensional printing process of stringed musical instruments. Polylactic acid (PLA), polyethylene terephthalate with glycol modification (PET-G), and acrylonitrile styrene acrylate (ASA) filaments were studied in terms of sound reflection using the transfer function method. In addition, the surface geometry parameters (Sa, Sq, Sz, and Sdr) were measured, and their relation to the acoustic performance of three-dimensional-printed samples was investigated. It was found that a higher layer height, and thus a faster printing process, does not necessarily mean poor acoustical properties. The proposed methodology also proved to be a relatively easy and rapid way to test the acoustic performance of various materials and the effect of three-dimensional printing parameters to test such a combination at the very beginning of the production process.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10181013 | PMC |
| http://dx.doi.org/10.3390/polym15092025 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Mechanical Construction to Enhance the Stability and Safety of Lifting and Thrusting Manipulation of Acupuncture.
J Vis Exp
January 2025
School of Acupuncture-Moxibustion and Tuina, Shanghai University of Traditional Chinese Medicine;
The therapeutic effectiveness of acupuncture relies on both safety and stability, making these factors essential in acupuncture manipulation research. However, manual manipulation introduces unavoidable inaccuracies, which can impact the reliability of research findings. To address this challenge, a unique lifting and thrusting manipulation control cannula was designed in this study, offering flexible adjustment of movement amplitude.
View Article and Find Full Text PDFTrends in dentomaxillofacial radiology.
World J Radiol
January 2025
Department of Dentomaxillofacial Radiology, Faculty of Dentistry, Ankara University, Ankara 06500, Türkiye.
Oral and maxillofacial diagnostic imaging is of paramount importance in dental clinical diagnosis, treatment planning, and follow-up procedures. Periapical radiographic examination and numerous panoramic systems are used in routine clinical dental practice. Cone beam CT is widely used and currently the method of choice in oral and maxillofacial implantology, endodontics, maxillofacial surgery, periodontics, degenerative temporomandibular joint disease, orthodontics, airway studies, sleep disorders, and forensic dentistry.
View Article and Find Full Text PDFFracture resistance of analog and CAD-CAM long-span fixed provisional restorations: An in vitro experimental study.
J Prosthodont
January 2025
The Office of Assistant Dean for Research, School of Dental Medicine, Medical Sciences Campus, University of Puerto Rico, San Juan, Puerto Rico.
Purpose: This study aimed to evaluate and compare the fracture resistance of long-span fixed provisional restorations fabricated using milling, three-dimensional (3D) printing, and conventional methods.
Materials And Methods: Sixty specimens were prepared, divided into four groups of 15 each, corresponding to four fabrication methods: computer-aided design and computer-aided manufacturing (CAD-CAM) milled provisional resins, 3D-printed provisional resins, 3D-printed permanent resins, and conventional bis-acryl restorations reinforced with wire. The specimens underwent a three-point bending test using a universal testing machine to measure fracture resistance, quantified as maximum force (in Newtons).
Biomechanical analysis of a newly designed and 3D printed plate-locking interbody cage: an observational study of finite element analysis.
Sci Rep
January 2025
Department of Orthopaedic Trauma, The Second Affiliated Hospital of Dalian Medical University, No. 467 Zhongshan Road, Shahekou District, Dalian, 116027, Liaoning, China.
Anterior cervical interbody fusion (ACDF) has become a classic surgical procedure for the treatment of cervical degenerative diseases, and various interbody cages are widely used in this procedure. We used 3D printing technology to produce a new type of plate-locking cage, anticipating to achieve high fusion rate with the high biomechanical stability. This study is to compare the biomechanical characteristics between a newly designed interbody cage and a conventional Zero-profile cage during ACDF using finite element analysis.
View Article and Find Full Text PDFAdvancing diagnostics and disease modeling: current concepts in biofabrication of soft microfluidic systems.
In Vitro Model
June 2024
3B's Research Group, European Institute of Excellence in Tissue Engineering and Regenerative Medicine Headquarters, Parque de Ciência e Tecnologia, I3Bs - Research Institute on Biomaterials, Biodegradable and Biomimetics - University of Minho, Zona Industrial da Gandra - Avepark, Barco, Guimaraes, 4805-017 Portugal.
Soft microfluidic systems play a pivotal role in personalized medicine, particularly in in vitro diagnostics tools and disease modeling. These systems offer unprecedented precision and versatility, enabling the creation of intricate three-dimensional (3D) tissue models that can closely emulate both physiological and pathophysiological conditions. By leveraging innovative biomaterials and bioinks, soft microfluidic systems can circumvent the current limitations involving the use of polydimethylsiloxane (PDMS), thus facilitating the development of customizable systems capable of sustaining the functions of encapsulated cells and mimicking complex biological microenvironments.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!