The Johnson-Cook (J-C) constitutive model is not suitable for Ti-6Al-4V alloy in the high-speed cutting finite element simulation, as it has no response dynamic recrystallization softening effect under heavy impact and high temperature. In this paper, an improved constitutive model considering the recrystallization effect was established, and the parameters were fitted with the data of flow stress-strain of the Split Hopkinson Pressure Bar (SHPB) test. The relevant theories of cutting finite element simulation were studied, such as nonlinear constitutive elastic-plastic deformation, strain state, and material yield. A subroutine that included the Recht shear failure instability criterion and the improved model was coded in Fortran and embedded in the finite element simulation software AdvantEdge FEM, along with the return mapping stress integration algorithm. The simulated stress of the improved model dropped dramatically from 460 MPa to 220 MPa when the temperature rises from 950 °C to 1000 °C, and its decline reached 46.7%, while the J-C model only decreased by 10%. Comparative studies indicate that the stress change of the improved constitutive simulation is closer to the SHPB test results than the J-C constitutive, and the new one is more suitable when it expresses the high temperature and heavy impact in the high-speed milling.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10179605 | PMC |
| http://dx.doi.org/10.3390/ma16093344 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Programmed shape transformations in cell-laden granular composites.
Sci Adv
January 2025
Department of Bioengineering, University of Pennsylvania, Philadelphia, PA 19104, USA.
Tissues form during development through mechanical compaction of their extracellular matrix (ECM) and shape morphing, processes that result in complex-shaped structures that contribute to tissue function. While observed in vivo, control over these processes in vitro to understand both tissue development and guide tissue formation has remained challenging. Here, we use combinations of mesenchymal stromal cell spheroids and hydrogel microparticles (microgels) with varied hydrolytic stability to fabricate programmable and dynamic granular composites that control compaction and tissue formation over time.
View Article and Find Full Text PDFBiomechanical evaluation of different fixation techniques in the rotation of the maxillary occlusal plane after Le Fort I osteotomy.
J Clin Exp Dent
December 2024
Faculty of Dentistry of Pernambuco, University of Pernambuco, 50100130, Recife, Pernambuco, Brasil.
Background: To analyze the biomechanical and functional characteristics of different maxillary fixation techniques after Le Fort I osteotomy and occlusal plane rotation, using the finite element method to simulate the mechanical behavior of three different osteosynthesis approaches.
Material And Methods: This is a virtual experimental study carried out using finite element analysis to compare three different osteosynthesis techniques after Le Fort I osteotomy and rotation of the maxillary occlusal plane. Three configurations were tested: four-point fixation with "L" plates (C1), two-point fixation with "L" plates (C2), and two-point fixation with pre-modeled Lindorf plates (C3).
Hemodynamic Evaluation of Intra-Aortic Dual-Balloon Pump Based on Fluid-Structure Interaction.
Int J Numer Method Biomed Eng
January 2025
Department of Cardiology, First Medical Center, General Hospital of Chinese people's Liberation Army, Beijing, China.
The intra-aortic balloon pump (IABP) is a widely-used mechanical circulatory support device that enhances hemodynamics in patients with heart conditions. Although the IABP is a common clinical tool, its effectiveness in enhancing outcomes for patients with acute myocardial infarction and cardiogenic shock remains disputed. This study aimed to assess the effectiveness of intra-aortic dual-balloon pump (IADBP) and its impact on aortic hemodynamics compared with an IABP.
View Article and Find Full Text PDFUnderwater low-power electromagnetic transducers with Central permanent magnet integration.
J Acoust Soc Am
January 2025
College of Biomedical Engineering and Instrument Science, Zhejiang University, Hangzhou, 310027, China.
High-efficiency electromagnetic transducers are crucial for enabling the self-sustained operation of underwater electromagnetic sound sources under power-constrained conditions as noted by Hao, Xie, and Ma [Proceedings of the 2019 Western China Acoustics Academic Conference, Guangzhou, China (November 5-9, 2019)]. This paper proposes a permanent magnet drive technology to enhance the electromechanical conversion efficiency of can-type electromagnetic transducers under low-power driving conditions. The can-type transducers consist of coils, an armature, and a cylindrical magnetic core with a central pillar, similar to the pot core proposed by Cui, Xu, Xu, and Shui [Electr.
View Article and Find Full Text PDFEnhancing Biomechanical Simulations Based on a Posteriori Error Estimates: The Potential of Dual-Weighted Residual-Driven Adaptive Mesh Refinement.
Int J Numer Method Biomed Eng
January 2025
Center of Mathematics, University of the Republic Uruguay, Montevideo, Uruguay.
The finite-element method (FEM) is a well-established procedure for computing approximate solutions to deterministic engineering problems described by partial differential equations. FEM produces discrete approximations of the solution with a discretisation error that can be quantified with a posteriori error estimates. The practical relevance of error estimates for biomechanics problems, especially for soft tissue where the response is governed by large strains, is rarely addressed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!