Nowadays, solid electrolytes are considered the main alternative to conventional liquid electrolytes in lithium batteries. The fabrication of these materials is however limited by the strict synthesis conditions, requiring high temperatures which can negatively impact the final performances. Here, it is shown that a modification of garnet-based Li La Zr O (LLZO) and the incorporation of tellurium can accelerate the synthesis process by lowering the formation temperature of cubic LLZO at temperatures below 700 °C. Optimized synthesis at 750 °C showed a decrease in particle size and cell parameter for samples with higher amounts of Te and the evaluation of electrochemical performances reported for LLZO Te0.25 a value of ionic conductivity of 5,15×10 S cm after hot-pressing at 700 °C, two orders of magnitude higher than commercial Al-LLZO undergoing the same working conditions, and the highest value at this densification temperature. Partial segregation of Te-rich phases occurs for high-temperature densification. Our study shows the advantages of Te insertion on the sintering process of LLZO garnet and demonstrates the achievement of highly conductive LLZO with a low-temperature treatment.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/cssc.202300399 | DOI Listing |
Inorg Chem
December 2024
State Key Laboratory of Crystal Materials and School of Crystal Materials, Shandong University, Jinan, Shandong 250100, China.
Chem Mater
November 2024
Laboratory for Thin Films and Photovoltaics, Empa-Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, CH-8600 Dübendorf, Switzerland.
Small
November 2024
College of Physics, Qingdao University, Qingdao, 266071, China.
Uneven diffusion and gradual accumulation of lithium under electric fields lead to the formation of lithium dendrite, which impedes the practical applications of all-solid-state lithium metal batteries. To achieve even deposition of Li, a free radical polymer (PTMA), poly (2,2,6,6-tetramethylpiperidinyloxy meth-acrylate), serving as Li transport and deposition mediator layer in Polyethylene oxide-LiLaZrO (PEO-LLZO) composite solid polymer electrolytes is employed. During the transporting process, Li is anchored by the O site of PTMA, hopping along PTMA chains until deposited onto the Li metal anode.
View Article and Find Full Text PDFSmall
November 2024
Department of Physics, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China.
Due to their substantial energy density, rapid charging and discharging rates, and extended lifespan, lithium-ion batteries have attained broad application across various industries. However, their limited theoretical capacity struggles to meet the growing demand for battery capacity in consumer electronics, automotive, and aerospace applications. As a promising substitute, solid-state lithium-metal batteries (SSLBs) have emerged, utilizing a lithium-metal anode that boasts a significant theoretical specific capacity and non-flammable solid-state electrolytes (SSEs) to address energy density limitations and safety concerns.
View Article and Find Full Text PDFAdv Sci (Weinh)
November 2024
Laboratory of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, Zürich, CH-8093, Switzerland.
Ultrafast sintering (UFS) is a compelling approach for fabricating LiLaZrO (LLZO) solid-state electrolytes (SSEs), paving the way for advancing and commercializing Li-garnet solid-state batteries. Although this method is commonly applied to the sintering of LLZO ceramics, its use for producing dense, phase-pure LLZO SSEs has thus far been primarily limited to millimeter-thick pellets, which are unsuitable for commercial solid-state batteries. This study presents ultrafast sintering as a highly effective approach for fabricating self-standing, dense, 45 µm-thick LLZO membranes.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!