Reusable passive sampler with carbon nanotubes for monitoring contaminants in wastewater: Application, regeneration and reuse.

Progress in excogitation suitable strategies for monitoring chemical compounds in wastewater is an essential step for further research into the occurrence, impact, and fate of the pollutants in the aquatic environment. At present, it is desirable to advance and use economical, environmentally friendly and non-labour intensive methods of environmental analysis. In this study, carbon nanotubes (CNTs) were successfully applied, regenerated, and reused as a sorbent in passive samplers for monitoring contaminants in treated and untreated wastewater at three wastewater treatment plants (WWTPs) located in different urbanization areas in northern Poland. Three cycles of chemical and thermal regeneration of used sorbents were performed. It was shown that it is possible to regenerate CNTs a minimum of three times and reuse them in passive samplers while maintaining the desired sorption properties. The obtained results confirm that the CNTs are perfectly in line with the main principles of green chemistry and sustainability. Carbamazepine, ketoprofen, naproxen, diclofenac, p-nitrophenol, atenolol, acebutolol, metoprolol, sulfapyridine and sulfamethoxazole were detected in each of the WWTPs, both in treated and untreated wastewater. The obtained data drastically show the inefficiency of the removal of contaminants by conventional WWTPs. More importantly, the results even indicate negative contaminant removal in most cases, i.e. higher concentrations (up to 863%) of these substances in the effluent compared to the influent.