Vanadium based compounds are promising cathode materials for aqueous zinc (Zn)-ion batteries (AZIBs) due to their high specific capacity. However, the narrow interlayer spacing, low intrinsic conductivity and the vanadium dissolution still restrict their further application. Herein, we present an oxygen-deficient vanadate pillared by carbon nitride (C N ) as the cathode for AZIBs through a facile self-engaged hydrothermal strategy. Of note, C N nanosheets can act as both the nitrogen source and pre-intercalation species to transform the orthorhombic V O into layered NH V O with expanded interlayer spacing. Owing to the pillared structure and abundant oxygen vacancies, both the Zn ion (de)intercalation kinetics and the ionic conductivity in the NH V O cathode are promoted. As a result, the NH V O cathode delivers exceptional Zn-ion storage ability with a high specific capacity of about 370 mAh g at 0.5 A g , a high-rate capability of 194.7 mAh g at 20 A g and a stable cycling performance of 10 000 cycles.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/anie.202303529 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Carbon nitride caught in the act of artificial photosynthesis.
Nat Commun
January 2025
Max Planck Institute of Colloids and Interfaces, Colloid Chemistry Department, Am Mühlenberg 1, 14476, Potsdam, Germany.
Covalent semiconductors of the carbon nitride family are among the most promising systems to realize "artificial photosynthesis", that is exploiting synthetic materials which use sunlight as an energy source to split water into its elements or converting CO into added value chemicals. However, the role of surface interactions and electronic properties on the reaction mechanism remain still elusive. Here, we use in-situ spectroscopic techniques that enable monitoring surface interactions in carbon nitride under artificial photosynthetic conditions.
View Article and Find Full Text PDFEnhanced CO₂ Photoreduction to Methane via Schottky Zn₃N₂/KPCN Heterojunctions for Sustainable Energy Applications.
Environ Res
January 2025
School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai 200093, China. Electronic address:
The pressing necessity to mitigate climate change and decrease greenhouse gas emissions has driven the advancement of heterostructure-based photocatalysts for effective CO₂ reduction. This study introduces a novel heterojunction photocatalyst formed by integrating potassium-doped polymeric carbon nitride (KPCN) with metallic Zn₃N₂, synthesized via a microwave-assisted molten salt method. The resulting Schottky contact effectively suppresses the reverse diffusion of electrons, achieving spatial separation of photogenerated charges and prolonging their lifetime, which significantly enhances photocatalytic activity and efficiency.
View Article and Find Full Text PDFEnhancing Carbon Monoxide Tolerance in Low-Temperature PEM Fuel Cells through Carbon Nitride Surface Modification.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China.
Low-temperature proton exchange membrane fuel cells (PEMFCs) reuqire highly pure hydrogen gas due to their extreme sensitivity to carbon monoxide (CO) contamination, which poses a challenge for using cost-effective reformed hydrogen sources. To address this issue, we have developed a surface modification strategy by applying a 0.5-0.
View Article and Find Full Text PDFRational design of stable carbon nitride monolayer membranes for highly controllable CO capture and separation from CH and CH.
Nanoscale
January 2025
Advanced Materials Science Innovation Center, Longmen Laboratory, Luoyang 471003, China.
CO capture and separation from natural and fuel gas are important industrial issues that refer to the control of CO emissions and the purification of target gases. Here, a novel non-planar g-CN monolayer that could be synthesized the supramolecular self-assembly strategy was identified using DFT calculations. The cohesive energy, phonon spectrum, BOMD, and mechanical stability criteria confirm the stability of the g-CN monolayer.
View Article and Find Full Text PDFPhotothermal Self-Healing Black g-CN Nanosheet-Based Coatings: A Novel Approach for Enhanced Anticorrosion and Antibiofouling Protection.
Small
January 2025
School of Material Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu, 212003, P. R. China.
Multifunctional coatings have great application value in the protection of Marine equipment, ships and ship facilities, but they still suffer from the disadvantages of high preparation cost and complicated synthesis methods. Herein, employing a simple method to synthesize black carbon nitride (BCN), as the filler in polydimethylsiloxane (PDMS) to construct BCN/PDMS composite coating with a multifunctional anti-corrosion/antifouling coating capable of photothermal self-healing property. Experimental results exhibit that the BCN/PDMS coating can still possesses excellent corrosion resistance after 28 d of immersion in the simulated seawater, and the impedance modulus still manages to reach 6.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!