Effective photon management is critical to realize high power conversion efficiencies for thin crystalline silicon (c-Si) solar cells. Standard few-100-µm-thick bulk cells achieve light trapping with macroscopic surface textures covered by thin, continuous antireflection coatings. Such sizeable textures are challenging to implement on ultrathin cells. Here, it is illustrated how nanoscale Mie-resonator-arrays with a bimodal size distribution support multiple resonances that can work in concert to achieve simultaneous antireflection and light-trapping across the broad solar spectrum. The effectiveness of these light-trapping antireflection coatings is experimentally demonstrated on a 2.8 µm-thick c-Si solar cell. The measured short-circuit current and corresponding power conversion efficiency are notably improved, achieving efficiencies as high as 11.2%. Measurements of the saturation current density on completed cells indicate that thermal oxides can effectively limit surface recombination. The presented design principles are applicable to a wide range of solar cells.

Download full-text PDF

Source
http://dx.doi.org/10.1002/adma.202210941DOI Listing

Publication Analysis

Top Keywords

c-si solar
12
solar cells
12
light trapping
8
power conversion
8
antireflection coatings
8
cells
6
solar
5
multi-resonant mie
4
mie resonator
4
resonator arrays
4

Similar Publications

Correlative Raman-Voltage Microscopy Revealing the Localized Structure-Stress Relationship in Silicon Solar Cells.

ACS Nano

January 2025

Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou 215123, P. R. China.

Knowledge of localized strain at the micrometer scale is essential for tailoring the electrical and mechanical properties of ongoing thinning of crystal silicon (c-Si) solar cells. Thinning c-Si wafers below 110 m are susceptible to cracking in manufacturing due to the nonuniform stress distribution at a micrometer region, necessitating a rigorous technique to reveal the localized stress distribution correlating with its device electrical output. In this context, a Raman microscopy integrated with a photovoltage mapping setup with high resolution to the submicrometer scale is developed to acquire correlative Raman-voltage of the localized physical properties at the microcracks on the rear side of c-Si solar cells.

View Article and Find Full Text PDF

This study presents a comprehensive evaluation of Copper Indium Gallium Selenide (CIGS) solar technology, benchmarked against crystalline silicon (c-Si) PERC PV technology. Utilizing a newly developed energy yield model, we analyzed the performance of CIGS in various environmental scenarios, emphasizing its behavior in low-light conditions and under different temperature regimes. The model demonstrated high accuracy with improved error metrics of normalized mean bias error (nMBE) ~ 1% and normalized root mean square error (nRMSE) of  ~ 8%-20% in simulating rack mounted setup and integrated PV systems.

View Article and Find Full Text PDF

Multifunctional Optimization of MXene for Enhanced Comprehensive Performance of Crystal Silicon-MXene Back-Heterojunction Solar Cells.

Small

December 2024

LONGi Institute of Future Technology, and School of Materials & Energy, Lanzhou University, 222 South Tianshui Road, Lanzhou, Gansu, 730000, China.

Enhancing the cost-performance ratio is a fundamental objective for the advancement of the photovoltaic sector. In this context, the development of innovative solar cells that offer a straightforward device configuration but high performance is arguably the most crucial element. Herein, an undoped back-heterojunction crystalline silicon (c-Si) solar cell is endeavored to be crafted by simply drop-casting a TiCT MXene ethanol colloidal solution onto the backside of an n-type c-Si (n-Si) wafer.

View Article and Find Full Text PDF

Silicon (Si) is currently the most mature and reliable semiconductor material in the industry, playing a pivotal role in the development of modern microelectronics, renewable energy, and bio-electronic technologies. In recent years, widespread research attention has been devoted to the development of advanced flexible electronics, photovoltaics, and bio-interfaced sensors/detectors, boosting their emerging applications in distributed energy sources, healthcare, environmental monitoring, and brain-computer interfaces (BCIs). Despite the rigid and brittle nature of Si, a series of new fabrication technologies and integration strategies have been developed to enable a wide range of c-Si-based high-performance flexible photovoltaics and electronics, which were previously only achievable with intrinsically soft organic and polymer semiconductors.

View Article and Find Full Text PDF

The power conversion efficiency of crystalline silicon (c - Si) solar cells have witnessed a 2.1% increase over the last 25 years due to improved carrier transport. Recently, the conversion efficiency of c - Si cell has reached 27.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!