As a source of clean energy, hydrogen (H) is a promising alternative to fossil fuels in reducing the carbon footprint. However, due to the highly explosive nature of H, developing a high-performance sensor for real-time detection of H gas at low concentration is essential. Here, we demonstrated the H gas sensing performance of Ag/Pd nanoparticle-functionalized ZnO nanoplates. Bimetallic Ag/Pd nanoparticles with an average size of 8 nm were prepared and decorated on the surface of ZnO nanoplates to enhance the H gas sensing performance. Compared with pristine ZnO, the sensor based on ZnO nanoplate doped with Ag/Pd (0.025 wt%) exhibited an outstanding response upon exposure to H gas ( / = 78 for 500 ppm) with fast response time and speedy recovery. The sensor also showed excellent selectivity for the detection of H over the interfering gases (, CO, NH, HS, and VOCs). The superior gas sensing of the sensor was dominated by the morphological structure of ZnO, and the synergistic effect of strong adsorption and the optimum catalytic characteristics of the bimetallic Ag/Pd enhances the hydrogen response of the sensors. Thus, bimetallic Ag/Pd-doped ZnO is a promising sensing material for the quantitative determination of H concentration towards industrial applications.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10132452PMC
http://dx.doi.org/10.1039/d3ra01436cDOI Listing

Publication Analysis

Top Keywords

zno nanoplates
12
gas sensing
12
sensor based
8
ag/pd nanoparticle-functionalized
8
nanoparticle-functionalized zno
8
sensing performance
8
bimetallic ag/pd
8
zno
7
gas
6
sensor
5

Similar Publications

Enhancing the Photoelectrochemical Activity of CuO/ZnO Junction Photocathodes for Water Splitting.

Langmuir

December 2024

Department of Chemical Engineering, Faculty of Industrial Technology and System Engineering, Sepuluh Nopember Institute of Technology, Kampus ITS Sukolilo, Surabaya 60111, Indonesia.

To facilitate fast transfer of photogenerated electrons and surface stability, the CuO photocathode needs to be coupled with another heterojunction material. Here, we propose CuO/ZnO heterojunctions as photocathodes for photoelectrochemical (PEC) water splitting. First, CuO was grown on a Cu substrate, either in the form of a foil or mesh gauge, via anodization followed by postheating treatment.

View Article and Find Full Text PDF

Facile construction of ZnWO/ZnO porous nanoplates on reduced graphene oxide for superior lithium storage.

J Colloid Interface Sci

October 2023

School of Environmental & Chemical Engineering, School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, PR China.

Zinc tungstate (ZnWO) shows great promise as an anode material for lithium-ion batteries (LIBs) owing to its reversible multi-electron redox reactions and high theoretical capacity. Nevertheless, the low conductivity and big strain during cycling can lead to the inferior electrochemical properties of the ZnWO anode, hindering its practical application. Herein, we report a novel composite with ZnWO/ZnO porous nanoplates in-situ constructed on reduced graphene oxide (rGO) by a metal-organic framework template strategy.

View Article and Find Full Text PDF

The detection of dimethyl sulphide (DMS) at levels between ppb and ppm is a significant area of research due to the necessity of monitoring the presence of this gas in a variety of environments. These include environmental protection, industrial safety and medical diagnostics. Issues related to certain uncertainties concerning the influence of high humidity on DMS measurements with resistive gas sensors, e.

View Article and Find Full Text PDF

High photocatalytic efficiency of a ZnO nanoplate/FeO nanospindle hybrid using visible light for methylene blue degradation.

RSC Adv

August 2024

Centre for Quantum Electronics, Institute of Physics, Vietnam Academy of Science and Technology 10 Dao Tan, Ba Dinh District Ha Noi City Vietnam.

In this work, ZnO nanoplates and FeO nanospindles were successfully fabricated a simple hydrothermal method using inorganic salts as precursors. The ZnO/FeO hybrid was fabricated using a mechanical mixture of two different ZnO : FeO weight ratios to investigate the effect of weight ratio on catalytic properties. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that ZnO nanoplates (NPls) are about 20 nm thick with lateral dimensions of 100 × 200 nm, and FeO nanospindles (NSs) are about 500 nm long and 50 nm wide.

View Article and Find Full Text PDF

Hydrogen production through photoelectrochemical (PEC) reactions is an innovative and promising approach to producing clean energy. The PEC working electrode of a CoO/ZnO-based p-n heterojunction was prepared by a straightforward electrochemical deposition with different deposition times onto an FTO (Fluorine-doped Tin Oxide) glass substrate. The successful synthesis of the materials was confirmed through analysis using XRD, FTIR, SEM-EDX, DRS, and PL techniques.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!