Rationale: Sample preparation is one of the most crucial steps for matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI). Scientists beginning their study with this technique may be overwhelmed by the variety of matrices, solvents, and concentrations; the methods of their applications; and the lack of widely available knowledge of the effect of these parameters on the results. Here we present in depth the aspects of matrix deposition, which will be helpful for the scientific community.
Methods: In this study, we tested several MALDI matrices, such as 2,5-dihydroxybenzoic acid (DHB), norharmane, N-(1-naphthyl)ethylenediamine dihydrochloride (NEDC), and 9-aminoacridine (9AA), using the SunCollect system: wet-interface matrix deposition in the context of lipid analysis. We optimized the number of matrix layers and nozzle settings in terms of spectral intensity and the overall quality of the obtained ion maps.
Results: Our research presents the effect of the number of matrix layers and nozzle settings on the results and allows for choosing the optimal parameters for the analyses. In positive ionization mode, DHB matrix could be chosen first. In the negative ionization mode, 1,5-diaminonaphthalene matrix produces a higher peak intensity in a lower mass range and seems to provide more information than 9AA. We recommend NEDC for particular processes such as glucose analysis. Compared to the remaining matrices, norharmane shows significant changes in the obtained ion maps.
Conclusions: Such a large amount of data allow us to observe an interesting conclusion: the obtained ion image for a particular ion could differ dramatically with a change in the matrix, the solvent composition, or even the number of matrix layers. This must be considered when interpreting the result, impelling us to compare the results obtained with different matrices with caution.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/rcm.9531 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of human myoblasts on tenogenic progression in 2D and 3D culture models.
J Anat
January 2025
Institute of Sports Medicine Copenhagen, Department of Orthopedic Surgery, Copenhagen University Hospital - Bispebjerg-Frederiksberg, Copenhagen, Denmark.
Tendon injuries and disorders associated with mechanical tendon overuse are common musculoskeletal problems. Even though tendons play a central role in human movement, the intrinsic healing process of tendon is very slow. So far, it is known that tendon cell activity is supported by several interstitial cells within the tendon.
View Article and Find Full Text PDFLong-Term Stability and Osteogenic Activity of Recycled Polysulfone-Calcium Silicate Bone Implants In Vitro.
J Funct Biomater
January 2025
Institute of Oral Science, Chung Shan Medical University, Taichung City 402, Taiwan.
Environmental protection issues have received widespread attention, making material recycling increasingly important. The upcycling of polysulfone (PSF) medical waste, recognized as a high-performance plastic with excellent mechanical properties, deserves promotion. While PSF is suitable for use as an orthopedic implant material, such as internal fixation, its osteogenesis capabilities must be enhanced.
View Article and Find Full Text PDFDual Repurposing of End-of-Life BWRO Membranes: Ultrafiltration Membranes for Advanced Wastewater Treatment and Cation Exchange Membranes for Fungal Microbial Fuel Cells.
Membranes (Basel)
December 2024
Group of Analysis & Processes, Faculty of Sciences, University of Angers, 2 Bd. A. de Lavoisier, 49045 Angers, Cedex 01, France.
The objective of this study is to evaluate the degradation of end-of-life BWRO membranes sourced from a factory in France by analyzing their water permeability, roughness, and chemical composition in order to diagnose the level of degradation incurred during their first life cycle in water softening. Following this, two new applications for the end-of-life BWRO membranes were investigated: (i) as ultrafiltration membranes (UF) for domestic effluent treatment and (ii) as cation exchange membranes (CEM) for use in fungal microbial fuel cells (FMFC). The UF membrane was renovated with an acetic acid treatment and, subsequently, used for domestic effluent filtration.
View Article and Find Full Text PDFFully Inkjet-Printed Flexible Graphene-Prussian Blue Platform for Electrochemical Biosensing.
Biosensors (Basel)
January 2025
University of Zagreb, Faculty of Chemical Engineering & Technology, Trg Marka Marulića 19, 10000 Zagreb, Croatia.
Prussian Blue (PB) is commonly incorporated into screen-printed enzymatic devices since it enables the determination of the enzymatically produced hydrogen peroxide at low potentials. Inkjet printing is gaining popularity in the development of electrochemical sensors as a substitute for screen printing. This work presents a fully inkjet-printed graphene-Prussian Blue platform, which can be paired with oxidase enzymes to prepare a biosensor of choice.
View Article and Find Full Text PDFCCL24 and Fibrosis: A Narrative Review of Existing Evidence and Mechanisms.
Cells
January 2025
Department of Immunology and Immunotherapy, School of Infection, Inflammation and Immunology, College of Medicine and Health, University of Birmingham, Birmingham B15 2TT, UK.
Tissue fibrosis results from a dysregulated and chronic wound healing response accompanied by chronic inflammation and angiogenesis. Regardless of the affected organ, fibrosis shares the following common hallmarks: the recruitment of immune cells, fibroblast activation/proliferation, and excessive extracellular matrix deposition. Chemokines play a pivotal role in initiating and advancing these fibrotic processes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!