Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have attracted much attention in wastewater treatment. Here, a series of (NH)MoS/MnFeO (MSMF) composites were prepared and used as PMS activators to remove tetracycline (TC) for the first time. When the mass ratio of (NH)MoS to MnFeO was 4.0 (MSMF4.0), the composite showed remarkable catalytic efficiency for activating PMS to remove TC. Over 93% of TC was removed in MSMF4.0/PMS system in 20 min. The aqueous OH as well as the surface SO and OH were the primary reactive species for TC degradation in MSMF4.0/PMS system, and the comprehensive experimental results excluded the contributions of aqueous SO, O, and O, high-valent metal-oxo species, and surface-bound PMS. The Mn(II)/Mn(III), Fe(II)/Fe(III), Mo(IV)/Mo(VI), and S/SO all contributed to the catalytic process. MSMF4.0 also showed excellent activity and stability after five cycles and significant degradation efficiency for a variety of pollutants. This work will provide theoretical basis for applying MnFeO-based composites in PMS-based AOPs.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-023-26967-6DOI Listing

Publication Analysis

Top Keywords

msmf40/pms system
8
nhmos/mnfeo hybrid
4
hybrid multiple
4
multiple active
4
active sites
4
sites boosted
4
boosted activation
4
activation peroxymonosulfate
4
peroxymonosulfate removal
4
removal tetracycline
4

Similar Publications

: Hip fractures are prevalent among the elderly and impose a significant burden on healthcare systems due to the associated high morbidity and costs. The increasing use of intramedullary nails for hip fracture fixation has inadvertently introduced risks; these implants can alter bone elasticity and create stress concentrations, leading to peri-implant fractures. The aim of this study is to investigate the outcomes of peri-implant hip fractures, evaluate the potential causes of such fractures, determine the type of treatment provided, assess the outcomes of said treatments, and establish possible improvement strategies.

View Article and Find Full Text PDF

MOFs-derived porous carbon embedded Fe nanoparticles as peroxymonosulfate activator for efficient degradation of organic pollutants.

Environ Res

January 2025

Heilongjiang Provincial Key Laboratory of CO(2) Resource Utilization and Energy Catalytic Materials, School of Materials Science and Chemical Engineering, Harbin University of Science and Technology, Harbin 150040, P. R. China. Electronic address:

Achieving the harmless degradation of organic pollutants remains a challenging task for the advanced oxidation processes. Metal-organic frameworks have emerged in the field of energy and environmental catalysis. Herein, MIL-101(Fe) was employed as the precursor to prepare a porous carbon embedded Fe nanoparticles (Fe@C) via a pyrolytic process under N protection.

View Article and Find Full Text PDF

The complex sorption mechanisms of carbon adsorbents for the diverse group of persistent, mobile, and potentially toxic contaminants (PMs or PMTs) present significant challenges in understanding and predicting adsorption behavior. While the development of quantitative predictive tools for adsorbent design often relies on extensive training data, there is a notable lack of experimental sorption data for PMs accompanied by detailed sorbent characterization. Rather than focusing on predictive tool development, this study aims to elucidate the underlying mechanisms of sorption by applying data analysis methods to a high-quality dataset.

View Article and Find Full Text PDF

Efficient activation of peroxymonosulfate by MoTiCT@Co for sustained emerging micropollutant removal: Mo vacancy-mediated activation in Fenton-like reactions.

J Colloid Interface Sci

December 2024

Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China.

Developing advanced heterogeneous catalysts through structural modifications effectively enhances the catalytic activity of non-homogeneous catalysts for removing emerging micropollutants (EMPs). In this study, MoTiCT@Co with Mo vacancies was synthesized using the Lewis molten salt method, which efficiently activates peroxymonosulfate (PMS) and continuously degrades EMPs in water. The abundant Mo vacancy structure in the material acts as an anchoring site for Co nanoparticles and a co-catalytic site for Fenton-like reactions, enabling PMS adsorption and activation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!