Hybrid nanocomposites of silver nanoparticles and multiwalled carbon nanotubes (AgNPs/MWCNTs) were successfully synthesized by a green one-step method without using any organic solvent. The synthesis and attachment of AgNPs onto the surface of MWCNTs were performed simultaneously by chemical reduction. In addition to their synthesis, the sintering of AgNPs/MWCNTs can be carried out at room temperature. The proposed fabrication process is rapid, cost efficient, and ecofriendly compared with multistep conventional approaches. The prepared AgNPs/MWCNTs were characterized using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The transmittance and electrical properties of the transparent conductive films (TCF_Ag/CNT) fabricated using the prepared AgNPs/MWCNTs were characterized. The results showed that the TCF_Ag/CNT film has excellent properties, such as high flexible strength, good high transparency, and high conductivity, and could therefore be an effective substitute for conventional indium tin oxide (ITO) films with poor flexibility.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10146721 | PMC |
| http://dx.doi.org/10.3390/nano13081297 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Eco-friendly synthesis of a porous reduced graphene oxide-polypyrrole-gold nanoparticle hybrid nanocomposite for electrochemical detection of methotrexate using a strip sensor.
Nanoscale
January 2025
Department of Chemistry, Indian Institute of Technology Palakkad, Palakkad, Kerala 678 557, India.
Chemotherapy is a crucial cancer treatment, but its effectiveness requires precise monitoring of drug concentrations in patients. This study introduces an innovative electrochemical strip sensor design to detect and continuously monitor methotrexate (MTX), a key chemotherapeutic drug. The sensor is crafted through an eco-friendly synthesis process that produces porous reduced graphene oxide (PrGO), which is then integrated with gold nanocomposites and polypyrrole (PPy) to boost the performance of a screen-printed carbon electrode (SPCE).
View Article and Find Full Text PDFA Schiff base-functionalized chitosan magnetic bio-nanocomposite for efficient removal of Pb (II) and Cd (II) ions from aqueous solutions.
Int J Biol Macromol
January 2025
Department of Chemistry, Faculty of Science, Arak University, Arak 38481-77584, Iran; Institute of Nanosciences &Nanotechnology, Arak University, Arak, Iran. Electronic address:
The rapid industrialization and human activities in catchments have posed notable global challenges in removing of heavy metal contaminants from wastewater. Here, Schiff-bases (SB) of cyanoguanidine (CG) and salicylaldehyde (SA) were covalently grafted on a magnetic nanocomposite of chitosan to form a hybrid magnetic nanostructure (FeO@CS-CGSB). The synthesized structure was characterized using various techniques such as Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), dynamic light scattering (DLS), zeta potential, and Brunauer-Emmett-Teller surface area analysis (BET).
View Article and Find Full Text PDFLayered triple hydroxide (NiCoFe-LTH) with g-CN hybrid nanocomposite as an adsorbent for Pb(II) extraction.
Food Chem
January 2025
Department of Chemistry, Faculty of Sciences, Erciyes University, 38039 Kayseri, Türkiye; Technology Research & Application Center (ERU-TAUM), Erciyes University, 38039 Kayseri, Türkiye; Turkish Academy of Sciences (TUBA), Çankaya, 06670, Ankara, Türkiye. Electronic address:
Hybrid graphitic carbon nitride (g-CN) with layer triple hydroxide (LTH) nanocomposite synthesized using the hydrothermal procedure has been investigated as a novel adsorbent g-CN@NiCoFe-LTH in the dispersive solid phase microextraction (DSp-ME) for Pb(II) determination in the food and water samples. The nanocomposite was characterized using FTIR, SEM, SEM-EDX, and XRD techniques. Several analytical parameters were adjusted, including pH, adsorbent quantity, adsorption and elution time, sample and eluent volume, and elution solvent concentration, and found as 8.
View Article and Find Full Text PDFDetonation Nanodiamond Soot-A Structurally Tailorable Hybrid Graphite/Nanodiamond Carbon-Based Material.
Nanomaterials (Basel)
January 2025
Enikolopov Institute of Synthetic Polymer Materials Russian Academy of Sciences (ISPM RAS), Profsoyuznaya St. 70, 117393 Moscow, Russia.
The results of a comprehensive investigation into the structure and properties of nanodiamond soot (NDS), obtained from the detonation of various explosive precursors (trinitrotoluene, a trinitrotoluene/hexogen mixture, and tetryl), are presented. The colloidal behavior of the NDS particles in different liquid media was studied. The results of the scanning electron microscopy, dynamic light scattering, zeta potential measurements, and laser diffraction analysis suggested a similarity in the morphology of the NDS particle aggregates and agglomerates.
View Article and Find Full Text PDFNanocomposites for Multifunctional Sensors: A Comprehensive Bibliometric Exploration.
Nanomaterials (Basel)
December 2024
Technology, Instruction and Design in Engineering and Education Research Group (TiDEE.rg), Catholic University of Ávila, C/Canteros s/n, 05005 Ávila, Spain.
Multifunctional nanocomposites have become critical components in advancing sensing technologies, owing to their exceptional integration of mechanical, electrical, thermal, and optical properties. The research landscape of nanocomposites for sensing applications from 2002 to 2024 is examined in this bibliometric review. It identifies key trends, influential works, prominent research areas, and global collaboration networks.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!