Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures.

The rise in the connectivity of the fractures is a key task in oil/gas and geothermal exploitation systems. Natural fractures widely exist in underground reservoir sandstone, while the mechanical behavior of rock with fractures subjected to hydro-mechanical coupling loads is far from clear. This paper employed comprehensive experiments and numerical simulations to investigate the failure mechanism and permeability law for sandstone specimens with T-shaped faces subjected to hydro-mechanical coupling loads. The effects of crack closure stress, crack initiation stress, strength, and axial strain stiffness of the specimens under different fracture inclination angles are discussed, and the evolution processes of permeability are obtained. The results show that secondary fractures are created around the pre-existing T-shaped fractures through tensile, shear, or mixed modes. The fracture network causes an increase in the permeability of the specimen. T-shaped fractures have a more significant effect on the strength of the specimens than water. The peak strengths of T-shaped specimens decreased by 34.89%, 33.79%, 46.09%, 39.32%, 47.23%, 42.76%, and 36.02%, respectively, compared with intact specimen without water pressure. With the increase in deviatoric stress, the permeability of T-shaped sandstone specimens decreases first, then increases, reaching its maximum value when macroscopic fractures are formed, after which the stress suddenly decreases. When the prefabricated T-shaped fracture angle is 75°, the corresponding permeability of the sample at failure is maximum, with a value of 15.84 × 10 m. The failure process of the rock is reproduced through numerical simulations, in which the influence of damage and macroscopic fractures on permeability is discussed.