Open-loop control is known to be an effective strategy for controlling self-excited periodic oscillations, known as thermoacoustic instability, in turbulent combustors. Here, we present experimental observations and a synchronization model for the suppression of thermoacoustic instability achieved by rotating the otherwise static swirler in a lab-scale turbulent combustor. Starting with the state of thermoacoustic instability in the combustor, we find that a progressive increase in the swirler rotation rate leads to a transition from the state of limit cycle oscillations to the low-amplitude aperiodic oscillations through a state of intermittency. To model such a transition while also quantifying the underlying synchronization characteristics, we extend the model of Dutta et al. [Phys. Rev. E 99, 032215 (2019)] by introducing a feedback between the ensemble of phase oscillators and the acoustic. The coupling strength in the model is determined by considering the effect of the acoustic and swirl frequencies. The link between the model and experimental results is quantitatively established by implementing an optimization algorithm for model parameter estimation. We show that the model is capable of replicating the bifurcation characteristics, nonlinear features of time series, probability density function, and amplitude spectrum of acoustic pressure and heat release rate fluctuations at various dynamical states observed during the transition to the state of suppression. Most importantly, we discuss the flame dynamics and demonstrate that the model without any spatial inputs qualitatively captures the characteristics of the spatiotemporal synchronization between the local heat release rate fluctuations and the acoustic pressure that underpins a transition to the state of suppression. As a result, the model emerges as a powerful tool for explaining and controlling instabilities in thermoacoustic and other extended fluid dynamical systems, where spatiotemporal interactions lead to rich dynamical phenomena.

Download full-text PDF

Source
http://dx.doi.org/10.1063/5.0136385DOI Listing

Publication Analysis

Top Keywords

thermoacoustic instability
12
transition state
12
model
9
acoustic pressure
8
heat release
8
release rate
8
rate fluctuations
8
state suppression
8
thermoacoustic
5
state
5

Similar Publications

Fokker-Planck modeling of the stochastic dynamics of a Rijke tube.

Chaos

August 2024

Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Hong Kong.

We derive and numerically validate a low-order oscillator model to capture the stochastic dynamics of a prototypical thermoacoustic system (a Rijke tube) undergoing a subcritical Hopf bifurcation in the presence of additive noise. We find that on the fixed-point branch before the bifurcation, the system is dominated by the first duct mode, and the Fokker-Planck solution for the first Galerkin mode can adequately predict the stochastic dynamics of the overall system. We also find that this analytical framework predicts well the dominant mode on the limit-cycle branch, but underperforms in the hysteretic bistable zone where the role of nonlinearities is more pronounced.

View Article and Find Full Text PDF
Article Synopsis
  • The study introduces a framework using Lagrangian Coherent Structures (LCSs) for controlling tonal sounds caused by thermoacoustic instability in a turbulent combustor.
  • Researchers performed experiments to identify dynamic flow regions where dominant acoustic frequencies occur, revealing critical interactions between shear layers and vortices in the combustor.
  • A passive control strategy was developed by injecting secondary air to influence the shear layer's behavior, effectively reducing sound amplitude by preventing vortex impingement on the combustor walls.
View Article and Find Full Text PDF

Synchronization under saturable nonlinearity.

Chaos

August 2024

CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zürich, 8092 Zürich, Switzerland.

In this theoretical work, we introduce a nonlinear gain saturation law representative of the experimentally observed properties manifested by phenomena ranging from aeroacoustic shear layers in self-sustained cavity oscillations to flame heat release rate in thermoacoustic instabilities. Furthermore, this type of saturable gain may be relevant for a wider class of physical systems, such as active laser media in photonics. The nonlinearity discussed herein governs the fullscale behavior of a self-oscillator exhibiting linear loss under large amplitude perturbations, in contrast to the cubic damping and linear gain of the Van der Pol model.

View Article and Find Full Text PDF

Thermoacoustic instability in turbulent combustion systems emerges from the complex interplay among the flame, flow, and acoustic subsystems. While the onset of thermoacoustic instability exhibits a global order, the characteristics of local interactions between subsystems responsible for this order are not well understood. Here, we utilize the framework of synchronization to elucidate the spatiotemporal interactions among heat release rate fluctuations in the flame, velocity fluctuations in the flow, and acoustic pressure fluctuations in a turbulent combustor, across the bluff-body stabilized flame.

View Article and Find Full Text PDF

Bridging the gap between annular and can-annular acoustic spectra.

J Acoust Soc Am

March 2024

CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zürich, Zürich, Zürich 8092, Switzerland.

In the literature on thermoacoustic instabilities in combustors, a distinction is typically made between annular and can-annular systems because these are the most common gas turbine architectures. In reality, however, annular combustors typically feature discretely symmetric elements, such as burner tubes, and can-annular combustors feature an azimuthally symmetric plenum at the turbine inlet. To better understand the general case in between the annular and can-annular extremes, we analyze the acoustic spectrum of an idealized can-annular combustion chamber with variable geometry, where the length of the axial gap distance beyond the ends of the cans-hence, the coupling strength-may be adjusted.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!