Characterisation of kapok fibre's biochar for arsenate adsorption removal from aqueous solution.

Al-KBC was produced through the simple pyrolysis of Al-modified kapok fibres at high temperatures. Using the N adsorption Brunauer Emmett Teller (BET) process, Fourier transforms infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), the energy-dispersive X-ray spectroscopy (EDS) spectroscopy, and X-ray photoelectron spectroscopy (XPS), the sorbent changes and characteristics were analysed. As a result of Al's addition to the fibre's surface, Al-KBC exhibited superior As(V) adsorption performance compared to KBC due to better pore structures. Experiments on the kinetics of As(V) adsorption revealed that the adsorption followed the pseudo-second-order model and that intradiffusion was not the only factor governing the adsorption. Experiments with isotherms indicated that the adsorption mechanism corresponded to the Langmuir model, and the adsorption capacity Q of Al-KBC at 25 °C was 483 μg/g. The thermodynamic experiments suggested that the adsorption reactions were spontaneous endothermic with a random approach at the adsorption interface. 25 mg/L of coexisting ions such as sulphate and phosphate reduced the sorbent As(V) removal ability to 65% and 39%. After seven cycles of adsorption/desorption, Al-KBC demonstrated satisfactory performance in terms of reusability, adsorbing 53% of 100 μg/L As(V) from the water. This novel BC can probably be used as a filter to purify groundwater with high As(V) concentration in the rural zone.