The increase of global environmental restrictions concerning solid and liquid industrial waste, in addition to the problem of climate change, which leads to a shortage of clean water resources, has raised interest in developing alternative and eco-friendly technologies for recycling and reducing the amount of these wastes. This study aims to utilize Sulfuric acid solid residue (SASR), which is produced as a useless waste in the multi-processing of Egyptian boiler ash. A modified mixture of SASR and kaolin was used as the basic component for synthesizing cost-effective zeolite using the alkaline fusion-hydrothermal method for the removal of heavy metal ions from industrial wastewater. The factors affecting the synthesis of zeolite, including the fusion temperature and SASR: kaolin mixing ratios, were investigated. The synthesized zeolite was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), particle size analysis (PSD) and N adsorption-desorption. The SASR: kaolin weight ratio of 1:1.5 yields faujasite and sodalite zeolite with 85.21% crystallinity, which then shows the best composition and characteristics of the synthesized zeolite. The factors affecting the adsorption of Zn, Pb, Cu, and Cd ions from wastewater on synthesized zeolite surfaces, including the effect of pH, adsorbent dosage, contact time, initial concentration, and temperature, have been investigated. The obtained results indicate that a pseudo-second-order kinetic model and Langmuir isotherm model describe the adsorption process. The maximum adsorption capacities of Zn, Pb, Cu, and Cd ions onto zeolite at 20 °C were 12.025, 15.96, 12.247, and 16.17 mg·g, respectively. The main mechanisms controlling the removal of these metal ions from aqueous solution by synthesized zeolite were proposed to be either surface adsorption, precipitation, or ion exchange. The quality of the wastewater sample obtained from the Egyptian General Petroleum Corporation (Eastern Desert, Egypt) was highly improved using the synthesized zeolite and the content of heavy metal ions was significantly reduced, which enhances the utilization of the treated water in agriculture.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10052068PMC
http://dx.doi.org/10.3390/nano13061091DOI Listing

Publication Analysis

Top Keywords

synthesized zeolite
24
metal ions
16
heavy metal
12
sasr kaolin
12
zeolite
9
egyptian boiler
8
boiler ash
8
removal heavy
8
ions industrial
8
industrial wastewater
8

Similar Publications

Zeolite coatings are studied as molecular sieves for membrane separation, membrane reactors, and chemical sensor applications. They are also studied as anticorrosive films for metals and alloys, antimicrobial and hydrophobic films for heating, ventilation, and air conditioning, and dielectrics for semiconductor applications. Zeolite coatings are synthesized by hydrothermal, ionothermal, and dry-gel conversion approaches, which require high process temperatures and lengthy times (ranging from hours to days).

View Article and Find Full Text PDF

Application of zeolites for efficient tannery wastewater remediation.

Environ Sci Pollut Res Int

December 2024

Stazione Sperimentale Per L'industria Delle Pelli E Delle Materie Concianti S.R.L., 80143, Napoli, Italy.

Leather manufacturing is the process of converting raw animal hides or skins into finished leather. The complex industrial procedures result in a tanning effluent composed of chemical compounds with potentially hazardous impacts on humans and ecosystems. Among the traditional and efficient wastewater treatments, adsorption is an effective and well-known approach, able to manage a wide range of contaminants from wastewater.

View Article and Find Full Text PDF

This study aims to modify raw zeolite with metal oxide nanocomposites to remove nickel (Ni) ions from synthetic wastewater. Novel zeolite-doped magnesium oxide (MgO), iron oxide (FeO), and zinc oxide (ZnO) nanocomposites were synthesized by hydrothermal-calcination methods. The novel zeolite-doped metal oxide nanocomposites were used as adsorbents to remove Ni (II) ions from synthetic wastewater.

View Article and Find Full Text PDF

Redefining the Role of Cobalt Oxide in Ethane Dehydroaromatization: Insights into Enhanced Catalytic Activity and Stability.

ACS Appl Mater Interfaces

December 2024

Department of Chemical and Biological Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.

Cobalt is recognized as an active catalyst in ethane dehydroaromatization (EDA) reactions due to its efficient ethane cracking capability. In order to optimize cobalt's strong ethane cracking capability, it was loaded onto HZSM-5 zeolite through impregnation. This study was conducted with Co-loaded HZSM-5 catalysts with an incipient wetness impregnation method and witnessed an increase of catalytic activity with a long induction period.

View Article and Find Full Text PDF

The treatment of effluents from the pharmaceutical industry currently remains a major challenge due to their impact on the environment and public health along with the cost of treatments. Considering these issues, our work focused on the development of materials with effective adsorption properties to treat industrial effluents based on locally available and inexpensive clays and zeolite. Local Algerian kaolin (Djebel Debbagh), palygorskite (Ghoufi) and zeolite (Tinbdar) were treated thermally and chemically prior to synthesis into mesoporous materials of hexagonal structure using pluronic P123 as surfactant.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!