It is important to improve the liquid lead corrosion resistance of fuel cladding alloy for promoting the development of lead-based reactors. The corrosion behaviors of traditional T91 steel and similar oxide dispersion strengthen ODS-type steels with or without the addition of Al, and were examined and compared at 600 °C in static oxygen-controlled liquid Pb in this research. High-temperature liquid lead corrosion tests were carried out for 120 h, 240 h, 500 h, 1000 h, and 2000 h, respectively, for three prepared samples. After the experiment, the corrosion behavior was evaluated and compared mainly based on the aspects of appearance, corrosion depth, microstructure, and composition difference. It was found that just the ODS design did not show a positive effect on corrosion resistance, while the addition of Al is beneficial to improving the corrosion resistance of ODS steel. The maximum corrosion depth of 9CrAl ODS is only 51.8 μm after corrosion for 2000 h, which is much lower than that of 9Cr-ODS steel. A thin film containing Al/Cr formed in the corrosion area after adding Al in 9Cr ODS steel, which played a positive role in corrosion resistance.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10054900 | PMC |
| http://dx.doi.org/10.3390/ma16062295 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Surface S-Doped Nanostructured RuO and Its Anion Passivating Effect for Efficient Overall Seawater Splitting.
ACS Nano
January 2025
State Key Laboratory of Silicate Materials for Architectures & State Key Laboratory of Advanced Technology for Materials Synthesis and Processing & School of Chemistry, Chemical Engineering and Life Sciences & Laoshan Laboratory & School of Materials Science and Engineering & International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
Electrolysis of seawater for hydrogen (H) production to harvest clean energy is an appealing approach. In this context, there is an urgent need for catalysts with high activity and durability. RuO electrocatalysts have shown efficient activity in the hydrogen and oxygen evolution reactions (HER and OER), but they still suffer from poor stability.
View Article and Find Full Text PDFProperties and corrosion resistance mechanism of a self-healing octadecyl amine loaded ethyl cellulose microcapsule coatings loaded with epoxy resin.
Sci Rep
January 2025
School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, 114051, China.
In order to provide long-term anti-corrosion properties of the coatings on the substrate, a microcapsule self-healing coatings system was designed in this paper. Microcapsules were synthesized with ethyl cellulose and octadecyl amine, which were added to epoxy resin to prepare self-healing coatings. The shape of microcapsules was spherical, the average particle size of microcapsules was about 100-120 μm, and the average thickness of microcapsules was 4.
View Article and Find Full Text PDFSynergistic Effect of CNT and N-Doped Graphene Foam on Improving the Corrosion Resistance of Zn Reinforced Epoxy Composite Coatings.
Polymers (Basel)
December 2024
Institute of Advanced Wear & Corrosion Resistant and Functional Materials, Jinan University, Guangzhou 510632, China.
The synergistic effect of CNT and three-dimensional N-doped graphene foam (3DNG) on improving corrosion resistance of zinc-reinforced epoxy (ZRE) composite coatings was studied in this work. Although CNT itself was demonstrated to be effective to promote the anti-corrosion performance of the ZRE coating, the incorporation of additional 3DNG leads to further enhancement of its corrosion resistance under the synergistic effect of the hybrid carbon nanofillers with different dimensions. Both the content of the carbonaceous fillers and the ratio between them affected the performance of the coating.
View Article and Find Full Text PDFThe Impact of Nickel-Zinc Ferrite Nanoparticles on the Mechanical and Barrier Properties of Green-Synthesized Chitosan Films Produced Using Natural Juices.
Polymers (Basel)
December 2024
Tecnologico de Monterrey, School of Engineering and Sciences, Atizapan de Zaragoza C.P. 52926, Estado de Mexico, Mexico.
A trend has been established concerning the research and development of various green and biodegradable plastics for multi-purpose applications, aiming to replace petroleum-based plastics. Herein, we report the synthesis of chitosan (CH) films using lemon juice; these were reinforced with NiZnFeO nanoparticles (NiZnFeO NPs) to obtain improved mechanical and barrier properties, facilitating their future application as sustainable, corrosion-resistant coatings for medical instruments. The synthesized NiZnFeO NPs had a crystallite size of ~29 nm.
View Article and Find Full Text PDFAnalysis of the Properties of Anticorrosion Systems Used for Structural Component Protection in Truck Trailers.
Materials (Basel)
December 2024
Faculty of Mechanical Engineering and Computer Science, University of Bielsko-Biala, Willowa 2, 43-309 Bielsko-Biala, Poland.
The article compares the properties of coatings (cataphoretic, hot-dip zinc, and thermo-diffusion zinc) applied to steel components used in the automotive industry. The research focused on the analysis of corrosion resistance, hardness measurements, and tribological properties conducted on steel guides used in trailer and truck body structures as well as fasteners (M12 × 40 bolts). The base surfaces were cleaned chemically.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!