Supercapacitive swing adsorption (SSA) with garlic roots-derived activated carbon achieves a record adsorption capacity of 312 mmol kg at a low energy consumption of 72 kJ mol and high mass loadings (>30 mg cm ) at 1.0 V for 85%N /15%CO mixtures. The activated carbons are inexpensively prepared in a one-step process using potassium carbonate, and air as activators. The adsorption capacity further increases with increasing voltage. At a voltage of 1.4 V, a sorption capacity of 524 mmol kg at an energy consumption of 130 kJ mol can be achieved. The volumetric sorption capacity is also enhanced and reaches values of 85.7 mol m at 1.0 V, and 126 mol m at 1.4 V. Cycle stability for at least 130 h is demonstrated.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/smll.202207834 | DOI Listing |
ACS Nano
January 2025
Yusuf Hamied Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge CB2 1EW, U.K.
Carbon dioxide capture underpins an important range of technologies that can help to mitigate climate change. Improved carbon capture technologies that are driven by electrochemistry are under active development, and it was recently found that supercapacitor energy storage devices can reversibly capture and release carbon dioxide. So-called supercapacitive swing adsorption (SSA) has several advantages over traditional carbon dioxide capture technologies such as lower energy consumption and the use of nontoxic materials.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
September 2024
Department of Chemistry, Lehigh University, 6 East Packer Avenue, Bethlehem, PA 18015, USA.
We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O in the CO/N gas mixture results in an up to 11 times higher CO adsorption capacity with 3 M MgBr (at 0.6 V) and up to 4-5 times higher adsorption capacity with 3 M MgCl (at 1 V).
View Article and Find Full Text PDFSmall
August 2024
Department of Chemistry, Lehigh University, 6 East Packer Avenue, Bethlehem, PA, 18015, USA.
Supercapacitive swing adsorption (SSA) modules with bipolar stacks having 2, 4, 8, and 12 electrode pairs made from BPL 4 × 6 activated carbon are constructed and tested for carbon dioxide capture applications. Tests are performed with simulated flue gas (15%CO /85%N) at 2, 4, 8, and 12 V, respectively. Reversible adsorption with sorption capacities (≈58 mmol kg) and adsorption rates (≈38 µmol kg s) are measured for all stacks.
View Article and Find Full Text PDFSmall
June 2023
Department of Chemistry, 6 East Packer Avenue, Lehigh University, Bethlehem, PA, 18015, USA.
Supercapacitive swing adsorption (SSA) with garlic roots-derived activated carbon achieves a record adsorption capacity of 312 mmol kg at a low energy consumption of 72 kJ mol and high mass loadings (>30 mg cm ) at 1.0 V for 85%N /15%CO mixtures. The activated carbons are inexpensively prepared in a one-step process using potassium carbonate, and air as activators.
View Article and Find Full Text PDFNanoscale
June 2022
Department of Chemistry, University of Cambridge, Lensfield Road, CB2 1EW, UK.
Supercapacitive swing adsorption (SSA) is a recently discovered electrochemically driven CO capture technology that promises significant efficiency improvements over traditional methods. A limitation of this approach is the relatively low CO adsorption capacity, and the underlying molecular mechanisms of SSA remain poorly understood, hindering optimization. Here we present a new device architecture for simultaneous electrochemical and gas-adsorption measurements, and use it to investigate the effects of charging protocols on SSA performance.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!