Diamond-like carbon (DLC) has attracted significant attention in the recent decades because of its unique properties and applications. Ion beam assisted deposition (IBAD) has been widely established in industry due to the advantages of easy handling and scalability. In this work, a hemisphere dome model is specially designed as a substrate. The influence of the surface orientation on the coating thickness, Raman I/I ratio, surface roughness and the stress of the DLC films are examined. The reduction in the stress in the DLC films reflects the lower energy-dependence in diamond due to the varied sp3/sp2 fraction and columnar growth pattern. The variation of the surface orientation provides an efficient means of tailoring the properties and microstructure of the DLC films.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10004551 | PMC |
| http://dx.doi.org/10.3390/ma16051773 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Tuning the optical, electrical, and structural properties of Cu-DLC thin films via simultaneous DC-RF unbalanced magnetron sputtering.
Heliyon
November 2024
Faculty of Physics, Shahrood University of Technology, 3619995161, Shahrood, Iran.
This study evaluates the deposition of diamond-like carbon (DLC) films with copper impurities on a glass substrate using simultaneous direct current (DC) and radio frequency (RF) magnetron sputtering. The structural, optical, electrical, and mechanical properties, as well as the surface topography of the films, were investigated under various DC power levels using Raman spectroscopy, ellipsometry, UV-VIS, I-V measurements, nanoindentation, AFM, and FESEM. Results indicate that increasing the DC power to the graphite target from 60 to 120 , while maintaining a constant 10 of RF power to the copper target, enhances the optical absorption coefficient of the films and increases the optical bandgap from 0.
View Article and Find Full Text PDFThe Doping of a Carbon Coating with Phosphorus as a Potential Way of Improving the Biological Properties of Diamond-like Carbon.
Materials (Basel)
November 2024
Department of Applied Pharmacy, Faculty of Pharmacy, Medical University of Lodz, Jana Muszyńskiego 1, 90-001 Lodz, Poland.
The potential of diamond-like carbon coatings in medicine can be increased by doping them with various elements. Such modifications especially affect the biological properties of the synthetized films. In the following research, phosphorus was introduced into the carbon matrix by means of the chemical vapor deposition technique and using an organic precursor.
View Article and Find Full Text PDFWear-free sliding electrical contacts with ultralow electrical resistivity.
Proc Natl Acad Sci U S A
November 2024
Center for Nano and Micro Mechanics, School of Aerospace Engineering, Tsinghua University, Beijing 100084, China.
Article Synopsis
- Sliding electrical contacts in connectors face issues like high energy consumption and wear, which can lead to failures and reduced lifespan.
- An ultralow-friction state called structural superlubricity (SSL) was achieved using single-crystal graphite flakes on metals, showing promise for better performance.
- By applying a thin diamond-like carbon coating on nickel alloy, conductivity improved, allowing for the development of a prototype SSL slip ring with no friction or wear, paving the way for advancements in electromechanical systems.
In Situ Transition of Amorphous Carbon to Graphite-like Structures Using MXene as a Template for Fast and Long-Lasting Macrosuperlubricity.
ACS Appl Mater Interfaces
November 2024
Key Laboratory of Science and Technology on Wear and Protection of Materials, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, PR China.
Achieving fast and long-lasting superlubricity in two-dimensional (2D) materials under high-stress conditions is challenging due to their susceptibility to structural deformations, limited load-bearing capacity, oxidation, and thermal degradation. This study introduces an innovative strategy by utilizing a composite of MXene and H-DLC, where, under high-stress conditions, H-DLC acts as a preferential energy-absorbing phase. MXene serves as a template to rapidly and continuously transform the absorbed energy into graphene-like structures, forming an in situ heterogeneous MXene/graphene-like interface.
View Article and Find Full Text PDFEnhanced adhesion and wear resistance of DLC films on AZ31 alloy achieved with high bias voltage.
Heliyon
October 2024
School of Intelligent Manufacturing Engineering, Harbin Huade University, Harbin, 150025, Heilongjiang, China.
Article Synopsis
- Diamond-like carbon (DLC) films were applied to AZ31 surfaces without an adhesive layer, showcasing high adhesion and excellent wear resistance.
- Various structural analyses including SEM, TEM, and Raman spectroscopy were employed, and mechanical properties were assessed through nano-indentation and scratch tests.
- High substrate bias (-500 to -800 V) resulted in greater compressive stress and film hardness, while moderate to low bias levels (-300 to 500 V and 0 to -300 V, respectively) exhibited diminishing mechanical properties as substrate temperature increased.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!