Multiphase holdup measurement of oil-gas-water flow using new dual receiver fiber-optical probe array multiphase logging tool.

To solve the problem of multiphase holdup measurement, a new dual-receiver fiber-optical probe array multiphase logging tool (NDRFOPA_MLT) is designed and developed. This paper first constructed the mechanism model of an NDRFOP for phase holdup measurement by using the ray tracing method and theoretically analyzed the feasibility of NDRFOP to measure phase holdup; considering the shortcomings of NDRFOP local measurement, a NDRFOPA sensor for oil production three-phase flow is designed and developed. At the same time, the volume of fluid model was used to simulate the distribution characteristics of the medium in the NDRFOPA_MLT measurement pipeline under the working conditions of oil-gas-water flow with a total flow rate range of 0.42-1.25 m/h, water holdup range of 50%-80%, oil holdup range of 10%-30%, and gas holdup range of 10%-40%. In addition, the NDRFOPA_MLT measurement models for different multiphase flow conditions were established by the ZEMAX ray tracing method, and the sensitivity distribution, response characteristics, and phase holdup measurement methods were studied to obtain the phase holdup measurement results under multiphase flow conditions. Finally, a multiphase flow experimental platform with a measurement pipe diameter of 20 mm and a measurement pipe length of 300 mm was established, and experiments were conducted under multiphase flow conditions, such as a gas flow rate range of 0.04-0.16 m/h, oil flow rate range of 0.64-1.70 m/h, and water flow rate range of 0.53-2.58 m/h. The experimental results showed that phase holdup measurement error was mainly kept within 10%.