A new mechanism of Bragg phenomenon is theoretically identified that, remarkably, occurs in a uniform medium and relies on resonant tuning of the medium parameters rather than on wavelength-matching. Due to the uniformity, reflection ensues over a broad wavelength range, much like a metal, but is polarization dependent: one circular state is reflected, whereas the other is transmitted. Such a medium can thus provide a broadband, low-loss polarization divider/combiner. Assessing a realistic embodiment with loss and material dispersion, we discuss practical realizations within range of current meta-media technology at terahertz and optical frequencies.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OL.478955DOI Listing

Publication Analysis

Top Keywords

bragg phenomenon
8
broadband bragg
4
phenomenon uniform
4
uniform birefringent
4
medium
4
birefringent medium
4
medium mechanism
4
mechanism bragg
4
phenomenon theoretically
4
theoretically identified
4

Similar Publications

A heterodyne laser Doppler vibrometer (LDV) with a Bragg cell has a stationary signal carrier at a frequency of at least 35 MHz. The expensive Bragg cell with the restricted shift frequency is not an optimal solution to meet the requirements for many measurement scenarios. For vibrations with low frequencies and small amplitudes, a tens-of-megahertz carrier frequency not only wastes bandwidth at the photodetector but also requires a fast and expensive analog-to-digital converter (ADC).

View Article and Find Full Text PDF

We demonstrate optical nonthermal excitation of exchange dominated spin waves of different orders in a magnetophotonic crystal. The magnetophotonic structure consists of a thin magnetic film and a Bragg stack of nonmagnetic layers to provide a proper nonuniform interference pattern of the inverse Faraday effect induced by light in the magnetic layer. We found a phenomenon of the pronounced phase slippage of the inverse Faraday effect distribution when the pump wavelength is within the photonic band gap of the structure.

View Article and Find Full Text PDF

Guided waves (GW) allow fast inspection of a large area and hence have received great interest from the structural health monitoring (SHM) community. Fiber Bragg grating (FBG) sensors offer several advantages but their use has been limited for the GW sensing due to its limited sensitivity. FBG sensors in the edge-filtering configuration have overcome this issue with sensitivity and there is a renewed interest in their use.

View Article and Find Full Text PDF

Skull Base Chordoma and Chondrosarcoma: Neuroradiologist's Guide to Diagnosis, Surgical Management, and Proton Beam Therapy.

Radiographics

October 2024

From the Department of Radiology (G.M.P., P.B., M.W.) and ENT Surgery (R.K.B.), Manchester Royal Infirmary, Oxford Road, Manchester, United Kingdom M13 9WL; Department of Neuroradiology, Walton Centre NHS Foundation Trust, Liverpool, United Kingdom (R.S.); Department of Radiology, Salford Royal Hospital, Salford, United Kingdom (A.H., S.A.); Department of Neurosurgery, Salford Royal Hospital, Salford, United Kingdom (S.A.R., O.N.P.); University Hospital Lewisham, London, United Kingdom (O.I.); Department of Neurosurgery, Queen's Medical Centre, Nottinghamshire, United Kingdom and University of Nottingham, Nottingham, United Kingdom (L.J.G.); Department of Neurosurgery, Royal Sussex County Hospital Brighton, United Kingdom (C.L.H-W.); Division of Neuroscience (F.R.) and Division of Cancer Sciences (G.A.W.), University of Manchester, Manchester, United Kingdom; and Department of Clinical Oncology, Christie Hospital, Manchester, United Kingdom (R.J.C., S.P., G.A.W.).

Skull base chordomas and chondrosarcomas are distinct types of rare, locally aggressive mesenchymal tumors that share key principles of imaging investigation and multidisciplinary care. Maximal safe surgical resection is the treatment choice for each, often via an expanded endoscopic endonasal approach, with or without multilayer skull base repair. Postoperative adjuvant radiation therapy is frequently administered, usually with particle therapy such as proton beam therapy (PBT).

View Article and Find Full Text PDF

Microstructures of additively manufactured metal parts are crucial since they determine the mechanical properties. The evolution of the microstructures during layer-wise printing is complex due to continuous re-melting and reheating effects. The current approach to studying this phenomenon relies on time-consuming numerical models such as finite element analysis due to the lack of effective sub-surface temperature measurement techniques.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!