Response Surface Methodology (RSM) Approach to Optimization of Coagulation-Flocculation of Aquaculture Wastewater Treatment Using Chitosan from Carapace of Giant Freshwater Prawn .

The major sources of waste from aquaculture operations emanates from fish or shellfish processing and wastewater generation. A simple technique called coagulation/flocculation utilizes biowaste from aquaculture to produce chitosan coagulant for wastewater treatment. A chemical method was applied in the present study for chitin and chitosan extraction from carapace of and subsequent application for removal of turbidity and salinity from shrimp aquaculture wastewater. Box-Behnken in RSM was used to determine the optimum operating conditions of chitosan dosage, pH, and settling time, after which quadratic models were developed and validated. Results show that 80 g of raw powder carapace yielded chitin and chitosan of 23.79% and 20.21%, respectively. The low moisture (0.38%) and ash (12.58%) content were an indication of good quality chitosan, while other properties such as water-binding capacity (WBC), fat-binding capacity (FBC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) confirmed the structure and the α-group, as well as the rough morphology of chitosan. In addition, the high solubility (71.23%) and DDA (85.20%) suggested good coagulant potentials. It was recorded in this study that 87.67% turbidity was successfully removed at 20 mg/L of chitosan dosage and 6.25 pH after 30 min settling time, while 21.43% salinity was removed at 5 mg/L of chitosan dosage, 7.5 pH, and 30 min settling time. Therefore, the process conditions adopted in this study yielded chitosan of good quality, suitable as biopolymer coagulant for aquaculture wastewater treatment.