Development of an Electrically Conductive MDF Panel-Evaluation of Carbon Content and Resin Type.

Polymers (Basel)

Institute for Materials and Wood Technology, Bern University of Applied Sciences (BFH), CH-2500 Biel, Switzerland.

Published: February 2023

Electronics in furniture and construction materials, in particular technologies which allow for a flexible and cable-free connection of electronics in such materials, are gaining broader interest. This study shows a further development of a concept to obtain highly conductive medium-density fibreboard panels (MDF) for furniture application. MDF were produced using two mixing processes (wet and dry) for wood and carbon fibres to investigate the effects of resin type (urea formaldehyde (UF) and polymeric methylene diphenyl diisocyanate (pMDI)) and carbon fibre content on their mechanical, physical, and electrical properties. Overall, wet mixed fibres showed better electrical but reduced mechanical properties. Modulus of elasticity (MOE) and bending strength (MOR) values of 3500 MPa and 35 MPa, respectively, and internal bond (IB) values of 0.45 to 0.65 MPa with electrical conductivities of up to 230 S/m were achieved. The technology has been successfully implemented in a demonstration object showing the application in a small piece of furniture.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9960823PMC
http://dx.doi.org/10.3390/polym15040912DOI Listing

Publication Analysis

Top Keywords

resin type
8
development electrically
4
electrically conductive
4
conductive mdf
4
mdf panel-evaluation
4
panel-evaluation carbon
4
carbon content
4
content resin
4
type electronics
4
electronics furniture
4

Similar Publications

This study aimed to compare the bonding efficacy three bioactive self-adhesive restorative systems to dentin. A total of 80 permanent human molars were utilized in this study. The occlusal enamel was removed to exposed mid-coronal dentin; 40 molars were used for microshear bond strength testing, while the remaining molars were used for micromorphological analysis of restoration/dentin interface.

View Article and Find Full Text PDF

Background: Osteoarthritis is the prevailing form of inflammatory condition in joints of adults and the aging population, leading to long-term disability and chronic pain. Current therapeutic options have variable therapeutic efficacy and/or several side effects.

Methods: A randomized, placebo-controlled, double-blind clinical trial was conducted in 62 participants using a nutraceutical [standardized Boswellia serrata Roxb.

View Article and Find Full Text PDF

Clinical performance of minimally invasive full-mouth rehabilitation using different materials and techniques for patients with moderate to severe tooth wear: a systematic review and meta-analysis.

Clin Oral Investig

January 2025

Department of Prosthodontics, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, 310000, Zhejiang, China.

Objective: To evaluate short, mid and long-term clinical outcomes and patients' satisfaction of minimally invasive full-mouth rehabilitation using different materials and techniques for patients with moderate to severe tooth wear. Furthermore, materials were analyzed to identify their influences on clinical results.

Materials And Methods: Search was conducted in PubMed, Cochrane Central Register of Controlled Trial, Embase, Web of science and Scopus until December 19, 2024.

View Article and Find Full Text PDF

UV-Resistant Nanostructured Anti-reflective Film for Achieving Efficiency Enhancement of Perovskite Solar Cells and Potential of Fabricating Large-Scale Cu(In, Ga)Se Solar Cells.

ACS Appl Mater Interfaces

January 2025

Guangxi Key Laboratory of Optical and Electronic Material and Devices, School of Materials Science and Engineering, Guilin University of Technology, 12 Jiangan Road, Guilin, Guangxi 541004, China.

Sticker-type transparent antireflective film (STAF) is applied to perovskite solar cells (PSCs) to reduce the reflection and improve the light-trapping ability of PSCs. However, the development of STAF is hindered by many factors, such as expensive materials, low actual service life, unsatisfactory antireflective effect, and a lack of research on stability. This work proposes an ultraviolet (UV)-resistant enhanced sticker-type nanostructure acrylic resin antireflective film (SNAAF), which is applied to the incident surface of PSCs.

View Article and Find Full Text PDF

Comparing Sectional and Total Dentin Bond Strengths of Three Endodontic Sealers after Using the Single-cone Obturation Technique: An Study.

J Contemp Dent Pract

October 2024

College of Dentistry, Ajman University, Ajman P.O. Box 346, United Arab Emirates; Department of Endodontic, Faculty of Dentistry, Mansoura University, Egypt, Orcid: https://orcid.org/0000-0003-3391-5306.

Aim: This study aimed to investigate and compare the total and sectional bond strengths of three endodontic sealers when used with the single-cone obturation technique.

Materials And Methods: Forty-five human maxillary central incisors were prepared and divided into three groups according to the type of endodontic sealer: Group I (Gutta-percha/AH Plus Jet), group II (Gutta-percha/GuttaFlow 2), and group III (RealSeal/RealSeal SE). All canals were filled with the single-cone technique.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!