In the current research, the binary solution containing ionic liquid (IL), 1-ethyl-1-methylmorpholinium dimethyl phosphate ([CCMOR][DMP]), 1-ethyl-1-methylpiperidinium dimethyl phosphate ([CCPIP][DMP]), or ,,-triethyl--methylammonium dimethyl phosphate ([N][DMP]) with ethanol are investigated as new working fluids for absorption refrigeration technology. The IL was mixed with ethanol, which was considered as a refrigerant. Experimental (vapor + liquid) phase equilibria (VLE) of these binary systems were measured by an ebulliometric method within a temperature range from = (328.15 to 348.15) K with an increment of 10 K and pressures up to 90 kPa. Experimental VLE data were correlated using non-random two-liquid (NRTL) within the maximum average relative deviation of 0.45%, which confirms the effectiveness of using such a model for calculations. Each of the proposed binary systems exhibit a negative deviation from Raoult's law, which is a very important characteristic for working pairs used in absorption heat pumps or absorption refrigerators. From a technological point of view, measurements of physicochemical properties play an important role. In this research, liquid density and dynamic viscosity were determined at temperatures from = (293.15 to 338.15) K at ambient pressure over the whole concentration range. These properties were correlated using empirical equations. From experimental density data, the excess molar volumes were determined and correlated using the Redlich-Kister type equation. Ionic liquid: [CCMOR][DMP] and [CCPIP][DMP] were synthesized and characterized using NMR analysis. The thermophysical characterization of pure ILs, including glass transition temperature () and heat capacity at the glass transition temperature (Δ), was determined using the differential scanning calorimetry technique () at atmospheric pressure. In this work, the combination of basic studies on the effect of the cation structure of an ionic liquid on the properties of their solutions with ethanol and the possibility of future application of the tested systems in a viable refrigeration system are presented.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9961247 | PMC |
http://dx.doi.org/10.3390/molecules28041940 | DOI Listing |
Pharmaceutics
December 2024
Faculty of Pharmaceutical Sciences, Josai International University, 1 Gumyo, Togane 283-8555, Chiba, Japan.
: Laurocapram (Azone) attracted attention 40 years ago as a compound with the highest skin-penetration-enhancing effect at that time; however, its development was shelved due to strong skin irritation. We had already prepared and tested an ante-enhancer (IL-Azone), an ionic liquid (IL) with a similar structure to Azone, consisting of ε-caprolactam and myristic acid, as an enhancer candidate that maintains the high skin-penetration-enhancing effect of Azone with low skin irritation. In the present study, fatty acids with different carbon numbers (caprylic acid: C8, capric acid: C10, lauric acid: C12, myristic acid: C14, and oleic acid: C18:1) were selected and used with ε-caprolactam to prepare various IL-Azones in the search for a more effective IL-Azone.
View Article and Find Full Text PDFPlants (Basel)
January 2025
Research Faculty of Agriculture, Hokkaido University, Sapporo 060-8589, Japan.
This study explores the effects of a subcritical seawater treatment (SST) on buckwheat waste (BW), and the use of the hydrolysate as a liquid fertilizer to improve the growth of lettuce ( L.). Three temperature treatments (110 °C, 170 °C, 230 °C) were used for the SST, and the ionic composition in the seawater achieved the depolymerization and degradation of BW.
View Article and Find Full Text PDFMolecules
January 2025
Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510641, China.
Solid polymer electrolytes (SPEs) have attracted much attention due to their excellent flexibility, strong interfacial adhesion, and good processibility. However, the poor interfacial contact between the separate solid polymer electrolytes and electrodes leads to large interfacial impedance and, thus, hinders Li transport. In this work, an ionic liquid-modified comb-like crosslinked network composite solid-state electrolyte with an integrated electrolyte/cathode structure is prepared by in situ ultraviolet (UV) photopolymerization.
View Article and Find Full Text PDFMolecules
January 2025
CNR-STIIMA, Italian National Research Council, Institute of Intelligent Industrial Technologies and Systems for Advanced Manufacturing, 13900 Biella, Italy.
Thanks to their unique physicochemical properties, ionic liquids (ILs) have moved from niche academic interest to critical components in various industrial applications. The textile industry, facing significant environmental and economic pressures, has begun to explore ILs as sustainable alternatives to traditional solvents and chemicals. This review summarizes research on the use of ILs in various textile processes, including dyeing, finishing, and fiber recycling, where their high thermal stability, tunable solubility, and low volatility are exploited to reduce resource consumption and environmental impact.
View Article and Find Full Text PDFMolecules
January 2025
Department of Chemical Engineering, Louisiana Tech University, 600 Dan Reneau Drive, P.O. Box 10348, Ruston, LA 71272, USA.
Adequate water supplies are crucial for missions to the Moon, since water is essential for astronauts' health. Ionic liquids (ILs) have been investigated for processing metal oxides, the main components of lunar regolith, to separate oxygen and metals. The IL must be diluted in the process.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!