The conventional metal-ceramic is still considered the gold standard in fixed prosthetics especially in terms of longevity. Among alternative materials used, Monolithic Zirconia has shown the capability to reconcile excellent biomechanical properties with acceptable aesthetic performance and to overcome several inconveniences related to veneer restorations. This study aims to clinically evaluate Monolithic Zirconia prosthetic crowns on natural abutments in the posterior sectors, performed by final-year dental medicine students (undoubtedly with less experience in the management of such material) by the standardized California Dental Association score system evaluation, to better understand the viability of Monolithic Zirconia. This prospective study was carried out at the Dental School of the University of Bari "Aldo Moro", Italy. Prosthetic rehabilitation included single crowns or a short pontic prosthesis with maximum one intermediate. Final-year dental students performed tooth reduction under the supervision of three expert tutors. The California Dental Association systematics (based on color, surface, anatomical shape, and marginal integrity) were adopted to evaluate the prosthetic maintenance status over time. Annual follow-up visits were re-evaluated by the same parameters each year. Univariate logistic regression analysis was performed to evaluate outcomes and the Kaplan-Meier plot to report survival. The sample consists of 40 crowns performed on 31 patients, 15 males (48.4%) and 16 females (51.6%) with an average age of 59.3 years. The clinical cases subjected to experimental study were found to be "Excellent" (1a/2a/3a/4a) in 34 cases (85%), "Acceptable" in 4 cases (10%), and "To be re-done" in 2 cases (failures) (5%). Our conclusive data support the predictability of Monolithic Zirconia restorations on natural posterior abutments at a long-term follow-up of five years, even when performed by less-experienced clinicians.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9966316 | PMC |
| http://dx.doi.org/10.3390/ijerph20042943 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Load-bearing capacity of screw-retained fixed dental prostheses made of monolithic zirconia on different abutment designs and abutment-free implant connection.
J Dent
January 2025
Senior Research and Teaching Assistant, Clinic of Reconstructive Dentistry, Center for Dental Medicine, University of Zurich, Plattenstrasse 11, 8032 Zurich, Switzerland. Electronic address:
Objectives: A new abutment-free implant connection allows for direct screwing of FDPs on implants to avoid complications caused by cement rests or screw loosening, which may affect to screw torque and load distribution. The objective of this study was to test the initial (Fi) and final failure (Ff) loads and torque changes of abutment-free monolithic zirconia CAD-CAM fixed dental prostheses (FDPs) compared to titanium FDPs on different abutment designs.
Methods: Three-unit screw-retained FDPs (n=50) on two implants (n=100) were divided into groups (n=10) based on the implant-abutment connection and material of the supra-structure: (1) abutment-free monolithic CAD-CAM zirconia FDP (Abut-free-Zr), (2) abutment-free veneered titanium FDPs (Abut-free-Ti), (3) monolithic zirconia FDPs with titanium base abutments (Zr-Ti-Base), (4) monolithic zirconia FDPs on multi-unit abutments (Zr-MU), (5) veneered titanium FDP on multi-unit abutments (Ti-MU).
Effect of extrinsic pigmentation and multiple firing cycles on the properties of a zirconia-containing lithium silicate ceramic.
J Prosthodont
January 2025
Department of Dentistry, Federal University of Rio Grande do Norte (UFRN), Lagoa Nova, Natal, Brazil.
Purpose: To assess the impact of staining and multiple firings on the mechanical, optical, and surface characteristics of zirconia-containing lithium silicate ceramics (ZLS).
Materials And Methods: Ninety ZLS discs (Suprinity, VITA Zahnfabrick) were divided according to the "Number of firings" protocol: Ctr-control, no characterization; SC-single firing cycle (for characterization, crystallization and staining simultaneously); and DC-double firing cycle (crystallization firing cycle was performed separately from the staining firing). Extrinsic pigmentation was performed to replicate the characterization of a monolithic restoration.
Full-arch implant-supported rehabilitation using reverse scan technique: A case report.
J Oral Implantol
January 2025
Department of Orthodontics and Pedodontics, Faculty of Dentistry, Van Lang University, Ho Chi Minh City, Vietnam.
The reverse scan technique offers several advantages, such as improvements of accuracy and visibility of critical anatomical structures, minimizing chair time, and providing better patient comfort. This was a case report successfully employing the reverse scan technique. A 72-year-old male patient desired to restore his teeth in both jaws, as he experienced difficulty eating and had never worn dentures.
View Article and Find Full Text PDFTrueness of tooth modified scan bodies as a novel technique for edentulous full arch implant supported dental prosthesis: an in vivo prospective comparative study.
BMC Oral Health
January 2025
Oral Medicine, Periodontology and Oral Diagnosis, Faculty of Dentistry, Assiut University, Assiut, Egypt.
Objective: This study aimed to evaluate the clinical performance (degree of trueness) of a novel scan body "tooth-modified Scan body" (TMSB)& conventional scan body (CSB) in implant-supported full arch screw retained cases.
Methods: Seven edentulous arches (two maxillae, five mandibles) in 6 patients were rehabilitated with monolithic zirconia screw-retained implant prostheses supported by 4 (n = 1) and 5 implants (n = 6) for a total amount of 34 implants. Implant locations were scanned by intra-oral scanner (IOS) using two types of scan bodies, conventional scan bodies (CSB) in group (1) and tooth-modified scan bodies (TMSB) in group (2).
Light-curing of restorative composite through milled and 3D-printed full-contour zirconia for adhesive luting.
Dent Mater
January 2025
KU Leuven, Department of Oral Health Sciences, BIOMAT & UZ Leuven, Dentistry, Kapucijnenvoer 7, 3000 Leuven, Belgium. Electronic address:
Objectives: To evaluate the effect of different zirconia compositions and manufacturing processes on the light irradiance (LI), to measure the degree of conversion (DC) of solely light-curing restorative composite underneath these zirconia grades and to evaluate the respective zirconia microstructures.
Methods: Six dental zirconia grades (GC HT, GC UHT [GC]; Katana HT, Katana UTML [Kuraray Noritake]; Lava Esthetic, Lava Plus [3 M Oral Care]) were cut and sintered per manufacturer instructions. One 3D-printed zirconia grade (XJet [XJET]) was prepared according to previous research.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!