A solar cell is a converter that uses semiconductor material to convert photon energy packets. The electrons located in the material's crystalline structure can escape from the bonds between their atoms and generate electricity. Photovoltaic (PV) solar cells can work via diffuse radiation and have the highest efficiency among other types of solar cell generation. Photovoltaic Thermal Collector (PVT)-based active cooling technology makes it possible to increase the efficiency of PV solar cells and to generate thermal energy at the same time through the direct conversion of solar radiation. Therefore, this study modeled various riser configurations on PVT collectors to cool PV solar cells using water heat transfer fluids and nanofluids: TiO, SiO, and AlO. The mass flow rates were varied. An ANSYS models a simulation of the heat transfer phenomenon between the PV cell layer and the fluid. Only the heat transfer phenomenon generated from the natural convection of the PV cell layer is studied using steady-state thermal ANSYS with simulated controlled conditions. The radiation intensity of 1000 W/m has the photovoltaic solar cells with the most negligible efficiency. The semicircular collector configuration with water at a mass flow rate of 0.5 kg/s demonstrated the highest electrical efficiency, achieving 11.98%.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9937902 | PMC |
| http://dx.doi.org/10.1016/j.heliyon.2023.e13390 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Solvent-dripping modulated 3D/2D heterostructures for high-performance perovskite solar cells.
Nat Commun
January 2025
KAUST Solar Center (KSC), Physical and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal, Kingdom of Saudi Arabia.
The controlled growth of two-dimensional (2D) perovskite atop three-dimensional (3D) perovskite films reduces interfacial recombination and impedes ion migration, thus improving the performance and stability of perovskite solar cells (PSCs). Unfortunately, the random orientation of the spontaneously formed 2D phase atop the pre-deposited 3D perovskite film can deteriorate charge extraction owing to energetic disorder, limiting the maximum attainable efficiency and long-term stability of the PSCs. Here, we introduce a meta-amidinopyridine ligand and the solvent post-dripping step to generate a highly ordered 2D perovskite phase on the surface of a 3D perovskite film.
View Article and Find Full Text PDFExploring and increased acetate biosynthesis in Synechocystis PCC 6803 through insertion of a heterologous phosphoketolase and overexpressing phosphotransacetylase.
Metab Eng
January 2025
Microbial Chemistry, Department of Chemistry-Ångström Laboratory, Uppsala University, Uppsala, Sweden. Electronic address:
Acetate is a biological anion with many applications in the chemical and food industries. In addition to being a common microbial fermentative end-product, acetate can be produced by photosynthetic cyanobacteria from CO using solar energy. Using wild-type cells of the unicellular model cyanobacterium Synechocystis PCC 6803 only low levels of acetate are observed outside the cells.
View Article and Find Full Text PDFEffects of Additional Flexible and Rigid Structure on BDT-BDD Terpolymer and the Performance of Organic Solar Cells.
Polymers (Basel)
January 2025
School of Materials Science and Engineering, Ocean University of China, Qingdao 266100, China.
In organic solar cells, the aggregation and crystallization of polymers are significant for bulk heterojunction. Blending with acceptor materials, polymer donor materials can adjust their aggregation by the movement of the chain segments. In this paper, the unfused structures based on thiophene and carbazole are respectively designed and introduced into the donor-acceptor copolymer donor materials to investigate the influence of flexible and rigid structures on polymer-aggregation leading photoelectric performance.
View Article and Find Full Text PDFFew-Layered Black Phosphorene as Hole Transport Layer for Novel All-Inorganic Perovskite Solar Cells.
Materials (Basel)
January 2025
Hainan Engineering Research Center of Tropical Ocean Advanced Optoelectronic Functional Materials, Hainan International Joint Research Center of Marine Advanced Photoelectric Functional Materials, Key Laboratory of Laser Technology and Optoelectronic Functional Materials of Hainan Province, Key Laboratory of Functional Materials and Photoelectrochemistry of Haikou, College of Chemistry and Chemical Engineering, Hainan Normal University, Haikou 571158, China.
The CsPbBr perovskite exhibits strong environmental stability under light, humidity, temperature, and oxygen conditions. However, in all-inorganic perovskite solar cells (PSCs), interface defects between the carbon electrode and CsPbBr limit the carrier separation and transfer rates. We used black phosphorus (BP) nanosheets as the hole transport layer (HTL) to construct an all-inorganic carbon-based CsPbBr perovskite (FTO/c-TiO/m-TiO/CsPbBr/BP/C) solar cell.
View Article and Find Full Text PDFInvestigation of Biodegradation, Artificial Aging and Antibacterial Properties of Poly(Butylene Succinate) Biocomposites with Onion Peels and Wheat Bran.
Materials (Basel)
January 2025
Chair and Department of Biochemistry and Biotechnology, Medical University of Lublin, Chodzki 1 Street, 20-093 Lublin, Poland.
The present article focuses on the characterization of the new biocomposites of poly(butylene succinate) (PBS) with fillers of plant origin such as onion peels (OP) and durum wheat bran WB () subjected to composting and artificial aging. The susceptibility to fungal growth, cytotoxicity and antibacterial properties were also examined. The biodegradation of the samples was investigated under normalized conditions simulating an intensive aerobic composting process.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!