Background: Several new adjustable-loop devices (ALDs) for anterior cruciate ligament reconstruction (ACLR) have not been tested in vitro.

Purpose: To compare the biomechanical performances of 5 ALDs under a high cyclic load and forces representative of the return-to-play conditions seen in the recovering athlete.

Study Design: Controlled laboratory study.

Methods: A total of 10 devices for each of 5 chosen ALDs (UltraButton [Smith & Nephew], RigidLoop [DePuy Mitek], ProCinch [Stryker], TightRope [Arthrex], and ToggleLoc [Biomet]) were tested in a device-only model. The devices were secured to a servohydraulic test machine and preconditioned from 10 to 75 N at a rate of 0.5 Hz for 20 cycles. They were then subjected to high cyclic forces (100-500 N for 4000 cycles) and subsequently pulled to failure at 50 mm/min. The preconditioning displacement, permanent deformation, cumulative peak displacement, stiffness coefficient, and load to failure data were collected.

Results: The UltraButton displayed the greatest preconditioning displacement (0.22 ± 0.20 mm), followed by the RigidLoop (0.11 ± 0.03 mm), ProCinch (0.07 ± 0.04 mm), TightRope (0.07 ± 0.02 mm), and ToggleLoc (0.02 ± 0.03 mm). The TightRope displayed the greatest permanent deformation (3.19 ± 1.03 mm) followed by the UltraButton (2.14 ± 0.92 mm), ToggleLoc (2.02 ± 1.09 mm), RigidLoop (1.67 ± 0.1 mm), and ProCinch (1.38 ± 0.18 mm). The TightRope displayed the greatest cumulative peak displacement (3.69 ± 1.03 mm) followed by the UltraButton (2.46 ± 0.92 mm), ToggleLoc (2.37 ± 1.08 mm), RigidLoop (2.01 ± 0.1 mm), and ProCinch (1.75 ± 0.19 mm). The UltraButton displayed the largest stiffness coefficient (1347.22 ± 136.33 N/mm) followed by the RigidLoop (1325.4 ± 116.37 N/mm), ToggleLoc (1216.62 ± 131.32 N/mm), ProCinch (1155.56 ± 88.04), and TightRope (848.48 ± 31.94). The ToggleLoc displayed the largest load to failure (1874.42 ± 101.08 N) followed by the RigidLoop (1614.12 ± 129.11 N), UltraButton (1391.69 ± 142.04 N), ProCinch (1384.85 ± 58.62 N), and TightRope (991.8 ± 51.1 N.).

Conclusion: The 5 ALDs exhibited different biomechanical properties. None of them had peak cumulative displacements for which the confidence interval lay above 3 mm, thus no single device was determined to have a higher rate of clinical failure compared with the others.

Clinical Relevance: ALD choice may affect biomechanics after ACLR.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9940176PMC
http://dx.doi.org/10.1177/23259671221146788DOI Listing

Publication Analysis

Top Keywords

displayed greatest
12
high cyclic
8
preconditioning displacement
8
permanent deformation
8
cumulative peak
8
peak displacement
8
stiffness coefficient
8
load failure
8
ultrabutton displayed
8
tightrope displayed
8

Similar Publications

Influence of cell shape on sonoporation efficiency in microbubble-facilitated delivery using micropatterned cell arrays.

Sci Rep

December 2024

State Key Laboratory of Precision Measurement Technology and Instruments, Tianjin University, Tianjin, 300072, China.

Microbubble-facilitated sonoporation is a rapid, versatile, and non-viral intracellular delivery technique with potential for clinical and ex vivo cell engineering applications. We developed a micropatterning-based approach to investigate the impact of cell shape on sonoporation efficacy. Cationic microbubbles were employed to enhance sonoporation by binding to the cell membrane electrostatically.

View Article and Find Full Text PDF

The smaller-incision new-generation implantable miniature telescope (SING IMT) represents an advancement over the previous model, WA-IMT, serving as a unilateral prosthetic device for patients with late-stage age-related macular degeneration (AMD). This study aims to report changes in multifocal electroretinography (mfERG) 6 months post-SING IMT implantation. In this case series, we prospectively evaluated a cohort of phakic patients with late-stage AMD who underwent SING IMT implantation at the Ophthalmology Unit, University of Bari Aldo Moro, Italy.

View Article and Find Full Text PDF

Effects of cold-pressed oil additives in varying proportions: Physico-chemical characteristics of mayonnaises.

Food Chem

December 2024

Faculty of Engineering, Department of Food Engineering, Bolu Abant Izzet Baysal University, 14030 Golkoy, Bolu, Türkiye. Electronic address:

This study evaluated the effects of incorporating cold-pressed sesame (C-SEO), safflower (C-SAO), and black cumin oils (C-BCO) into mayonnaise at substitution ratios of 0-20 % to sunflower oil. Refined sunflower oil had the lowest free fatty acids (FFA) and strong antiradical activity due to high α-tocopherol and β-carotene content. C-BCO showed the highest oxidation levels with a peroxide value of 6.

View Article and Find Full Text PDF

Background: Ocular infections can harm the eye's anatomic structure on numerous levels. They are a global health issue. Endophthalmitis, a serious complication following cataract surgery, can result in substantial ocular morbidity and vision loss despite the administration of antibiotics.

View Article and Find Full Text PDF

Supplemental effects of in a low-fish meal diet for at varying temperatures: growth performance, innate immunity and gut bacterial community.

Front Immunol

December 2024

State Key Laboratory of Biocontrol, Guangdong Provincial Key Laboratory for Aquatic Economic Animals and Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), School of Life Sciences, Sun Yat-sen University, Guangzhou, China.

This study examined the effects of on the growth performance, innate immunity, and gut microbiota of under different water temperature conditions. Feeding regimens included a 20% fishmeal diet (control), a low-fish meal (LFM) diet with 10% fishmeal and an LFM diet supplemented with 0.03% .

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!