Aiming at the problems of low accuracy of coal gangue recognition and difficult recognition of mixed gangue rate, a coal rock recognition method based on modal fusion of RGB and infrared is proposed. A fully mechanized coal gangue transportation test bed is built, RGB images are obtained by camera, and infrared images are obtained by industrial microwave heating system and infrared thermal imager. the image data of the whole coal, whole gangue, and coal gangue with different gangue mixing as training and test samples, identify the released coal gangue and its mixing rate. The AlexNet, VGG-16, ResNet-18 classification networks and their convolutional neural networks with modal feature fusion are constructed. results: The classification accuracy of ResNet networks on RGB and infrared image data is higher than AlexNet and VGG-16 networks. The early convergence network performance of ResNet is verified through the convergence of different models. The recognition rate of the network is 97.92 the confusion matrix statistics, which verifies the feasibility of the application of modal fusion method in the field of coal gangue recognition. The fusion of modal features and early models of ResNet coal gangue, which is the basic premise for realizing intelligent coal caving.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9910643 | PMC |
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0281397 | PLOS |
Environ Res
January 2025
Key Laboratory of Chemical Additives for China National Light Industry, Shaanxi University of Science and Technology, 710021, Xi'an, China.
For the effective removal of phenol from the environment, photocatalytic synergistic adsorption is currently one of the key methods. By leveraging the polysaccharide backbone structure of sodium alginate (SA), Zinc hydroxystannate (ZHS) was introduced into the gel structure using a co-precipitation technique. Additionally, gangue waste was repurposed through a polymerization reaction.
View Article and Find Full Text PDFEnviron Geochem Health
January 2025
School of Chemical & Environmental Engineering, China University of Mining and Technology-Beijing, Beijing, 100083, China.
As a typical ecologically fragile area, the Wudong Coal Mine region in Xinjiang generates large accumulations of coal gangue each year, which, in the alkaline soil environment, can easily lead to significant leaching and accumulation of As. This study developed a stabilizer (CFD) using cement, fly ash, and desulfurized gypsum to modify in-situ soil in the Xinjiang mining area, resulting in a modified solidified soil with excellent geotechnical performance and As stabilization capability. The study results showed that when CFD content exceeded 14.
View Article and Find Full Text PDFEnviron Technol
January 2025
Jinan Licheng District Tongda municipal Engineering Department, Jinan, People's Republic of China.
To enhance the water stability and bearing capacity of the Shandong Ming Dong Expressway's soaked subgrade, carbide slag (CS) and coal gangue powder (CG) were used as stabilisers. Stabiliser dosages of 5%, 10%, and 15%, with the CS:CG ratios of 0:100, 30:70, 50:50, 70:30, and 100:0, were tested. The study evaluated the performance of CS-CG stabilised soil through unconfined compressive strength (UCS) tests at 7 and 28 days, six dry-wet cycles, a 30-day water immersion test, pH test, swell rate test, XRD, SEM, and MIP analyses.
View Article and Find Full Text PDFSci Rep
January 2025
Shanxi Provincial Geological Prospecting Bureau, Taiyuan, 030001, China.
In China, a significant amount of coal fly ash is stored or used for landfill reclamation. The contaminants in coal fly ash (CFA) leachate can cause regional soil and groundwater contamination during long-term storage. This paper focuses on a coal gangue comprehensive utilisation power plant in Fenyang City, Shanxi Province, China, where the leaching characteristics of CFA were investigated by leaching tests.
View Article and Find Full Text PDFSci Rep
January 2025
College of Mining, Guizhou University, Guiyang, 550025, Guizhou, China.
In order to solve the problems of serious deformation and difficult support of roadway surrounding rock in the process of gob-side entry driving, taking 230,708 working face of Huopu Mine as the engineering background, the migration characteristics of overburden rock and the stress distribution of surrounding rock before and after roof cutting in the process of gob-side entry driving were studied by means of theoretical analysis, similar simulation test and field measurement. The results show that: ① the establishment of lateral suspension mechanical model analysis found that, with the increase of coal seam dip angle, the reduction of the coal pillar bearing capacity before and after cutting the top gradually decreases, the dip angle of coal seam is 30°, Compared with the reduction of coal pillar bearing capacity before roof cutting is 2164 KN; with the increase of the overburden rock caving angle, the reduction of the coal pillar bearing capacity before and after cutting the top increases continuously, the caving angle of overburden rock is 63°, Compared with the reduction of coal pillar bearing capacity before roof cutting is 2218 KN. ② After the implementation of roof cutting and cutting off the overhanging roof structure, the stress of the surrounding rock of the coal pillar gang in the roadway has significantly decreased by 18.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!