Precision and efficient pesticide spraying is an important part of precision agriculture, banana is a large broad-leaved plant, with pests and diseases, has a high demand for spraying and pest control. The purpose of this study was to clarify the wettability of different pesticides on the banana leaf surface, and the effects of nozzle type and working parameters on the deposition distribution performance under air-assisted spray conditions. The wettability test results of different pesticides on banana leaf surfaces showed that the wettability of the adaxial side was always stronger than that of the abaxial side, the smaller the surface tension of the droplets, the better the wettability on the surface. The spray experiment was carried out on the previously developed air-assisted sprayer with the latest developed intelligent variable spray control system. Three types of nozzles were used to spray with different combinations of working parameters. The deposition distribution performance on the banana leaf surface was obtained by image processing using a self-compiled program. The experimental results show that the nozzle type, wind speed, and spray pressure have significant effects on the deposition distribution performance. Through the study of the interaction and coupling effect of nozzle type and working parameters on the spray droplet deposition distribution on both sides of banana leaves, the results show that under the conditions of hollow cone nozzle, 0.5Mpa spray pressure and 3-5 m/s wind speed, the spray coverage and droplet density are in the optimal state. This is mainly due to the low spray pressure and/or wind speed is not enough to make the banana leaves vibrate and improve the performance of pesticide deposition. excessive spray pressure and/or wind speed will cause large deformation of banana leaves and make them airfoil stable, which reduces the surface deposition performance. It is of great significance for promoting sustainable and intelligent phytoprotection.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9895840PMC
http://dx.doi.org/10.3389/fpls.2023.1079703DOI Listing

Publication Analysis

Top Keywords

deposition distribution
16
wind speed
16
spray pressure
16
banana leaf
12
nozzle type
12
working parameters
12
distribution performance
12
banana leaves
12
spray
11
air-assisted spray
8

Similar Publications

Enhanced photocatalytic degradation of Rhodamine B using polyaniline-coated XTiO(X = Co, Ni) nanocomposites.

Sci Rep

January 2025

Laboratory of Materials, Nanotechnologies and Environment, Center of Sciences of Materials, Faculty of Sciences, Mohammed V University in Rabat, Avenue Ibn Battouta, BP:1014, 10000, Rabat, Morocco.

In this study, novel polyaniline-coated perovskite nanocomposites (PANI@CoTiO and PANI@NiTiO) were synthesized using an in situ oxidative polymerization method and evaluated for the photocatalytic degradation of Rhodamine B (RhB) a persistent organic pollutant. The nanocomposites displayed significantly enhanced photocatalytic efficiency compared to pure perovskites. The 1%wt PANI@NiTiO achieved an impressive 94% degradation of RhB under visible light after 180 min, while 1wt.

View Article and Find Full Text PDF

As bacterial contamination crises escalate, the development of advanced membranes possessing both high flux and antibacterial properties is of paramount significance for enhancing water sterilization efficiency. Herein, an ultrathin layer of TbPa (an imine-linked covalent organic framework) and nanosized CuO clusters, sequentially deposited onto polyethersulfone membranes, demonstrate exceptional water flux performance, reaching a permeance level of 16000 LHM bar. The deposited TbPa, generating uniformly distributed reduction sites under illumination, facilitates the uniform formation of CuO clusters.

View Article and Find Full Text PDF

Experimental measurements of particle deposition in the human nasal airway.

Int J Pharm

January 2025

School of Engineering, Faculty of Science and Engineering, Macquarie University, Sydney, NSW 2109, Australia.

Intranasal drug delivery is a promising non-invasive method for administering both local and systemic medications. While previous studies have extensively investigated the effects of particle size, airflow dynamics, and deposition locations on deposition efficiency, they have not focused on the thickness of deposited particles, which can significantly affect drug dissolution, absorption and therapeutic efficacy. This study investigates the deposition patterns of dry powder particles within the nasal airway, specifically examining how factors such as flow rates, particle size, and particle cohesiveness influence deposition patterns and their thickness.

View Article and Find Full Text PDF

The hunting of waterfowl may contribute significantly to environmental contamination through the leaching of highly toxic elements (As, Pb, Sb) from spent gunshot deposited on hunting grounds. It is therefore clearly necessary to develop a biogeochemical protocol that might decipher the fate of spent gunshot in the environment. In that context, we present a study that follows the laboratory simulation approach and discusses the methodical pros and cons of the protocol.

View Article and Find Full Text PDF

Aim: To assess the relationship between body mass index (BMI), subcutaneous adipose tissue (SAT), visceral adipose tissue (VAT), epicardial adipose tissue (EAT), pericardial adipose tissue (PAT) and clinical outcomes in dilated cardiomyopathy (DCM) patients.

Methods: Non-ischemic DCM patients were prospectively enrolled. Regional adipose tissue, cardiac function, and myocardial tissue characteristics were measured by cardiac magnetic resonance (CMR).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!