Acoustic propagation measurements were collected in a seagrass meadow in a shallow lagoon for periods of over 65 h in winter and 93 h in summer. A bottom-deployed sound source transmitted chirps (0.1-100 kHz) every 10 min that were received on a four-receiver horizontal hydrophone array. Oceanographic probes measured various environmental parameters. Daytime broadband acoustic attenuation was 2.4 dB greater in summer than winter, and the median received acoustic energy levels were 8.4 dB lower in summer compared to winter. These differences were attributed in part to seasonal changes in photosynthesis bubble production and above-ground seagrass biomass.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1121/10.0016752 | DOI Listing |
Sensors (Basel)
December 2024
Institute of Fundamental Technological Research, Polish Academy of Sciences, ul. Pawińskiego 5B, 02-106 Warsaw, Poland.
In this paper, we demonstrate that torsional surface elastic waves can propagate along the curved surface of a metamaterial elastic rod (cylinder) embedded in a conventional elastic medium. The crucial parameter of the metamaterial rod is its elastic compliance s44(1)ω, which varies as a function of frequency ω analogously to the dielectric function εω in Drude's model of metals. As a consequence, the elastic compliance s44(1)ω can take negative values s44(1)ω<0 as a function of frequency ω.
View Article and Find Full Text PDFSensors (Basel)
December 2024
School of Computer Science, University of South China, Hengyang 421001, China.
In exploiting large propagation delays in underwater acoustic (UWA) networks, the time-domain interference alignment (TDIA) mechanism aligns interference signals through delay-aware slot scheduling, creating additional idle time for improved transmission at the medium access control (MAC) layer. However, perfect alignment remains challenging due to arbitrary delays. This study enhances TDIA by incorporating power allocation into its transmission scheduling framework across the physical and MAC layers, following the cross-layer design principle.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Department of Mechanics of Materials and Constructions (MeMC), Vrije Universiteit Brussel, B-1050 Brussels, Belgium.
There is very limited research in the literature investigating the way acoustic emission signals change when polymer materials are undergoing different fracture modes. This study investigates the capability of acoustic emission to recognize the fracture mode through acoustic emission parameter analysis, and can be considered the first-ever study which examines the impact of different loading conditions, i.e.
View Article and Find Full Text PDFTransl Vis Sci Technol
December 2024
Department of Biomedical Engineering, University of Houston, Houston, TX, USA.
Purpose: To assess the safety of acoustic radiation force optical coherence elastography in the crystalline lens in situ.
Methods: Acoustic radiation force (ARF) produced by an immersion single-element ultrasound transducer (nominal frequency = 3.5 MHz) was characterized using a needle hydrophone and used for optical coherence elastography (OCE) of the crystalline lens.
J Acoust Soc Am
January 2025
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China.
The dispersion of circumferential waves propagating around cylindrical and spherical underwater targets with an arbitrary number of elastic and fluid layers is modeled using the spectral collocation method. The underlying differential equations are discretized by Chebyshev interpolation and the corresponding differentiation matrices, and the calculation of the dispersion curves is transformed into a generalized eigenvalue problem. Furthermore, for targets in infinite fluid, the perfect matched layer is used to emulate the Sommerfeld radiation condition.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!