Purpose: To measure the wear at the implant interface between the Grade 4 titanium (Ti) of the implant and frameworks fabricated using two additively manufactured alloys (Ti alloy and cobalt-chromium [Co-Cr]) pre- and post-artificial aging.
Material And Methods: Three-unit frameworks supported by two implants were additively manufactured (Atlantis; Dentsply Sirona) using Ti and Co-Cr dental alloys. Two implants (OsseoSpeed EV, Astra Tech; Dentsply Sirona) were torqued on each non-engaging framework. The assembled implant-frameworks were secured into polyurethane foam blocks. Groups were created based on the material and surface assessed: framework (Ti-framework and Co-Cr-framework groups) and implant (Ti-implant group). Two subgroups were created depending on the location: premolar (PM) and molar (M). Computed tomography images were obtained pre- (as manufactured) and post-simulated mastication procedures. The pre- and post-simulated mastication files of each specimen were aligned using the best-fit algorithm using a metrology program. Wear was measured by calculating the volumetric discrepancies at the implant interface on 64 measurement points per area analyzed. Three-way ANOVA and Tukey tests were used to analyze the data (α = 0.05).
Results: The mean volumetric discrepancy values ranged from 0.8 to 3.1 µm among all the subgroups tested. The group (framework vs. implant) (p < 0.001) and tooth location (p < 0.001) were significant factors of the mean volumetric discrepancy values obtained. The framework group presented with significantly lower volumetric discrepancy mean values (1 µm) compared with the implant group (3 µm), whereas the premolar area obtained significantly lower mean volumetric discrepancy values (1.9 µm) compared with the molar location (2.3 µm).
Conclusions: Volumetric discrepancies were found at the implant-framework interface tested between the pre- and post-artificial aging measurements ranging from 1 to 3 µm after 1,200,000 cyclic loading that simulated approximately 12 months of function.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1111/jopr.13652 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Crystallographic Customization of Zinc Anode for High Performance Aqueous Metal Batteries.
Nano Lett
January 2025
Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012, PR China.
Aqueous zinc metal batteries (AZMBs) are an energy storage system that is expected to replace traditional lithium batteries. However, the practical application of AZMBs is hampered by some inherent drawbacks. Herein, an amino acid additive with a screening property is introduced.
View Article and Find Full Text PDFMEMS infrared light source stress optimization and reliable package design.
Rev Sci Instrum
January 2025
School of Electronic and Information Engineering, Nanjing University of Information Science and Technology, Nanjing 210000, China.
Aiming at the effects caused by stress and deformation on Micro-Electro-Mechanical System (MEMS) sensors, the stress distribution in the radiation area of the MEMS infrared light source is investigated, and by simulating and optimizing the thickness of the composite support film of the chip structure in COMSOL, a film layer thickness matching with lower stress and deformation for the MEMS infrared light source is derived. The utilization of the particle swarm algorithm and backpropagation neural network model allowed for the optimization of simulation data, enabling regression prediction over a broader range of thicknesses and providing a more precise depiction of the stress distribution trend. In addition, the specifications of the MEMS device help us to analyze the design of the support film thickness in the processing of the residual stress within the controllable range.
View Article and Find Full Text PDFVisible-Light-Fueled Polymerizations for 3D Printing.
Acc Chem Res
January 2025
Department of Chemistry, The University of Texas at Austin, 105 East 24th Street, Austin, Texas 78712, United States.
ConspectusLight-driven polymerizations and their application in 3D printing have revolutionized manufacturing across diverse sectors, from healthcare to fine arts. Despite the popularized notion that with 3D printing "imagination is the only limit", we and others in the scientific community have identified fundamental hurdles that restrict our capabilities in this space. Herein, we describe the group's efforts in developing photochemical systems that respond to nontraditional colors of light to elicit the rapid, spatiotemporally controlled formation of plastics.
View Article and Find Full Text PDFDoes Cigarette Smoke Affect Permanent Resin-Based Crown Materials?
J Esthet Restor Dent
January 2025
Department of Prosthodontic, Faculty of Dentistry, Cukurova University, Adana, Turkey.
Objective: The purpose of this study was to investigate how cigarette smoking affects the surface roughness (R) and stainability of additively and subtractively manufactured resins.
Materials And Methods: Two additively manufactured definitive resins (Dentafab, DF and Formlabs, FL) and a subtractively manufactured resin nanoceramic (Cerasmart, CS) were used to fabricate 60 specimens (14 × 12 × 1 mm). After taking baseline R and color measurements (ΔE), they were divided into two groups (n = 10).
Substituting the Conventional Facebow With an Extraoral Scan Body System for Transferring the Maxillary Cast Into the Virtual Articulator: Manufacturing Procedures and Digital Clinical Protocol.
J Esthet Restor Dent
January 2025
Graduate Prosthodontics, Department of Restorative Dentistry, School of Dentistry, University of Washington, Seattle, Washington, USA.
Clinical Considerations: Conventional facebow records are used to transfer the maxillary cast into the analog articulator. Different reference planes have been described, including the true horizontal or gravity reference plane. A conventional facebow (Kois Dentofacial Analyzer; Panadent) allows the recording of the gravity plane for transferring the maxillary cast into the analog semi-adjustable articulator.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!