Green and environment-friendly preparation are of the utmost relevance to the development of transparent antismudge coatings. To prepare a waterborne polyurethane (WPU) coating with antismudge property, it is challenging to balance the stability of dispersion and the antismudge property of coating. Herein, we prepare a transparent bio-based WPU coating grafted with a minor proportion of poly(dimethylsiloxane) (WPU--PDMS) using renewable castor oil, monocarbinol-terminated PDMS, hexamethylene diisocyanate trimer, and 2,2-bis(hydroxymethyl)propionic acid as raw materials. Effects of the dosage of monocarbinol-terminated PDMS, the curing temperature, and the curing time on the antismudge performance were studied. Results showed that rigorous stirring (3000 rpm) is necessary to obtain a stable WPU--PDMS dispersion with a storage time longer than 6 months. A high curing temperature (>160 °C) and a period of curing time (>1 h) are indispensable to obtain the excellent antismudge property because they would facilitate the grafted low-surface-tension PDMS chains to migrate from the interior to the coating surface. The facts that simulated contaminated liquids such as water, HCl solution, NaOH solution, artificial blood, and tissue fluid could slide off easily and cleanly, and marker ink lined on the coating surface could shrink, indicated that the WPU--PDMS coating has good antismudge properties, which could be self-compensated shortly after deterioration. Due to the high cross-linking degree caused by multifunctional polyol and isocyanate, the WPU--PDMS coating has high hardness and good anticorrosive performance. The antismudge functionalization and waterborne technology of bio-based polyurethane coatings proposed in this work could be a promising contribution to the green and sustainable development of functional coatings. This kind of WPU--PDMS coating is expected to protect and decorate electronic screens, vehicles, and buildings, especially endoscopes.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.2c21525 | DOI Listing |
Nat Commun
November 2024
College of Polymer Science & Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, P. R. China.
ACS Appl Mater Interfaces
August 2024
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, P. R. China.
The aqueous formulation of antismudge coatings is a crucial step for environmental protection and pollution reduction. However, the inferior mechanical durability of waterborne antismudge coatings poses challenges for their practical application. Herein, we developed a fully waterborne antismudge coating with excellent scratch resistance by preparing hyperbranched amine-rich polysiloxane (HSP) for antismudge ability and epoxy-rich zirconium-based aqueous solution (ZAS) for mechanical performance.
View Article and Find Full Text PDFAdv Mater
August 2024
Functional Nanomaterials Laboratory, Center for Micro/Nanomaterials and Technology, and Key Laboratory of Photochemical Conversion and Optoelectronic Materials, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.
Durable repellent surfaces of high transparency find key applications in daily life and industry. Nevertheless, developing anti-reflective coatings with omni-repellency, concerted multi-function, and desirable durability remains a daunting challenge. Here, a highly comprehensive coating is designed based on the combination of structural design and molecular design.
View Article and Find Full Text PDFACS Appl Mater Interfaces
July 2024
School of Materials Science and Engineering, Shaanxi Normal University, Xi'an 710062, China.
Transparent, hard, and flexible multifunctional coatings have a wide range of applications; however, most of them need organic solvents. Here, we present a solvent-free and UV-cured coating made from fluorinated epoxy MTQ silicone resin combined with branched triepoxy siloxane as the reactive diluent. After UV-initiated ring-opening polymerization in the presence of a triarylsulfonium hexafluoroantimonate catalyst, the resultant cured coating exhibits high transparency (∼92%, 550 nm), pencil hardness (7H), and flexibility (1 mm bending diameter) due to the formed organic-inorganic nanostructures in a highly cross-linked network.
View Article and Find Full Text PDFChem Sci
March 2024
Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology-Guwahati Kamrup Assam 781039 India
Smooth interfaces embedded with low surface free energy allow effortless sliding of beaded droplets of selected liquids-with homogeneous wettability. Such slippery interfaces display low or moderate contact angles, unlike other extremely liquid repellent interfaces ( superhydrophobic). These slippery interfaces emerged as a promising alternative to extremely liquid repellent hierarchically rough interfaces that generally suffer from instability under severe conditions, scattering of visible light because of the hierarchically rough interface, entrapment of fine solid particulates in their micro-grooves and so on.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!