The growth of two isolates of Staphylococcus epidermidis (one that was forming biofilm and one that was not) on new or used teatcups made of silicone for use in milking parlours for sheep, was assessed for 24 h after the application by smearing on the surface of the teatcup. Staphylococci were applied by smearing on an area of 0.0003142 (3.142 × 10−4) m2 on material obtained from the teatcups and their growth and expansion further on were monitored for 24 h at varying ambient conditions: temperature 21 °C or 31 °C and humidity 60% or 80%. No differences were evident between the two isolates in the frequency of recoveries in any of the conditions tested (p > 0.75 for all comparisons). Recovery rates were higher in humidity 80% compared to humidity 60%: 1678/2016 (83.2%) versus 1282/2016 (63.6%) (p < 0.0001), and in temperature 31 °C compared to temperature 21 °C: 1525/2016 (75.6%) versus 1435/2016 (71.2%) (p = 0.001). Recovery rates were also higher from new teatcups compared to used ones only in humidity 60%: 744/1008 (73.8%) versus 538/1008 (53.4%) (p < 0.0001). Humidity 80% was associated with higher speed of linear dissemination of the isolates on teatcup surface compared to humidity 60%: 0.000000640 (6.40 × 10−7) m s−1 versus 0.000000322 (3.22 × 10−7) m s−1 (+98.8%) (p < 0.0001); no such association was seen with higher temperature: 0.000000509 (5.09 × 10−7) m s−1 versus 0.000000453 (4.53 × 10−7) m s−1 for temperature 31 °C and 21 °C (+12.4%) (p = 0.29). As part of precision livestock farming, differing approaches can be instituted in accord with varying climatic conditions in different farms, as well as within the same farm with the change of seasons.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9855130PMC
http://dx.doi.org/10.3390/bioengineering10010081DOI Listing

Publication Analysis

Top Keywords

temperature °c
16
humidity 60%
16
10−7 s−1
16
compared humidity
12
milking parlours
8
°c °c
8
recovery rates
8
rates higher
8
humidity 80%
8
s−1 versus
8

Similar Publications

Thermally Controlled -site Cation Ordering and Coupled Polarity in Double Perovskite NaLaZrO.

Inorg Chem

January 2025

Department of Applied Chemistry, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan.

-site cation ordering in double perovskites is crucially important for their physical properties. In this study, polycrystalline samples of Zr-based double perovskite NaLaZrO were synthesized via high-temperature solid-state reactions, and the influence of the heating temperature and cooling rate on their crystal structures was investigated using synchrotron X-ray diffractometry and optical second harmonic generation. The samples prepared at 1200 °C, followed by slow cooling to room temperature, crystallize in a polar 2 structure, exhibiting partial -site cation ordering, with Na- and La-rich -site layers alternately stacked along the axis.

View Article and Find Full Text PDF

A flexible wearable sensor based on the multiple interaction and synergistic effect of the hydrogel components with anti-freezing, low swelling for human motion detection and underwater communication.

Int J Biol Macromol

January 2025

School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China; Ministry of Education Key Laboratory of Advanced Textile Composite Materials, Tiangong University, Tianjin 300387, China. Electronic address:

To meet the increasing demand for wearable sensor in special environment such as low temperature or underwater, a multifunctional ionic conducting hydrogel (Gel/PSAA-Al hydrogel) with anti-freezing and low swelling for human motion detection and underwater communication was prepared using gelatin (Gel), [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (SBMA), acrylamide (AAm), acrylic acid (AAc), and AlCl. Due to reversible hydrogen bonding, electrostatic interactions and metal coordination crosslinking between the polymer networks, the resulting Gel/PSAA-Al hydrogels present low swelling property in water and exhibit large tensile properties (~1050 %), high tensile strength (~250 kPa) and excellent fatigue resistance. In addition, the hydration capacity of SBMA and AlCl endows the Gel/PSAA-Al hydrogel fantastic anti-freezing (-31.

View Article and Find Full Text PDF
Article Synopsis
  • Smart hydrogel sensors can respond to stimuli like pH and temperature, with potential uses in biomedical, environmental, and wearable tech.
  • Developing wearable hydrogels that respond to body temperature, adhere well, and are transparent has been challenging.
  • The newly created thermo-responsive hydrogel changes properties based on temperature, is made using 3D printing, and can detect temperature and strain, making it ideal for smart medical applications.
View Article and Find Full Text PDF

This study aims to develop efficient and sustainable hydrogels for dye adsorption, addressing the critical need for improved wastewater treatment methods. Carboxymethyl cellulose (CMC)-based hydrogels grafted with AAc were synthesized using gamma radiation polymerization. Various AAc to CMC ratios (5:5, 5:7.

View Article and Find Full Text PDF

Multiple hour antifibrotic drug release enabled by a thermosensitive quadpolymer.

Int J Pharm

January 2025

Department of Obstetrics and Gynecology, Duke University Medical Center, Durham, NC 27710; Department of Chemistry and Biochemistry, North Carolina Central University, Durham, NC 27707. Electronic address:

Article Synopsis
  • The study focuses on an innovative thermosensitive quadpolymer designed for injection to deliver anti-fibrotic drugs, specifically targeting uterine fibroids while potentially preserving fertility.
  • The quadpolymer functions as an injectable solution at room temperature and transforms into a stable gel at body temperature, allowing for sustained release of the drug pirfenidone.
  • Results showed that the pirfenidone-loaded quadpolymer effectively inhibited fibroid cell proliferation, indicating its potential as a localized treatment option for uterine fibroid therapy.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!