Cellulose-based materials have the advantages of renewable, non-toxic, flexible, and strong mechanical properties, so it of is great significance to study the dielectric properties of cellulose-based materials. In this paper, we summarized the factors influencing the dielectric properties of cellulose and nanocellulose-based dielectric and the ways to change the dielectric properties, mainly exploring the methods to improve the dielectric constant of cellulose-based dielectric materials. Cellulose and nanocellulose-based dielectric need to improve the hygroscopic property, increase the flexibility and reduce dielectric loss of the composite materials. This review summarizes the current state-of-art progress of new dielectric materials for green energy storage and flexible electronic devices.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.carbpol.2022.120449 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Evaluating Oil Palm Trunk Biochar and Palm Oil as Environmentally Friendly Sustainable Additives in Green Natural Rubber Composites.
Polymers (Basel)
January 2025
Faculty of Science and Industrial Technology, Prince of Songkla University, Surat Thani Campus, Surat Thani 84000, Thailand.
This research examines the possibility of palm oil and oil palm trunk biochar (OPTB) from pyrolysis effectively serving as alternative processing oils and fillers, substituting petroleum-based counterparts in natural rubber (NR) composites. Chemical, elemental, surface and morphological analyses were used to characterize both carbon black (CB) and OPTB, by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) gas porosimetry, and scanning electron microscopy (SEM). The influences of OPTB contents from 0 to 100 parts per hundred rubber (phr) on thermal, dielectric, dynamic mechanical, and cure characteristics, and the key mechanical properties of particulate NR-composites were investigated.
View Article and Find Full Text PDFElectric Conductivity Transitions of Water-Absorbable Polybenzimidazole Films.
Polymers (Basel)
January 2025
Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan.
Transitions seen in the electric properties of water-absorbable poly(2,5-benzimidazole) (ABPBI) films were confirmed by electric conductivity, dielectric constant, and time-domain nuclear magnetic resonance (NMR) measurements. The electric resistance of the films was measured at room temperature using a high-resistance meter, and the dielectric constant at room temperature was measured using an LCR meter in the frequency range of 90 Hz to 8 MHz. The water absorption ratio at equilibrium absorption for the films was 37%, which corresponded to a volume fraction of water of 0.
View Article and Find Full Text PDFCritical Role of Rubber Functionalities on the Mechanical and Electrical Responses of Carbon Nanotube-Based Electroactive Rubber Composites.
Polymers (Basel)
January 2025
School of Mechanical Engineering, Yeungnam University, 280, Daehak-ro, Gyeongsan 38541, Republic of Korea.
Carbon nanomaterials, particularly carbon nanotubes (CNTs), are widely used as reinforcing fillers in rubber composites for advanced mechanical and electrical applications. However, the influence of rubber functionality and its interactions with CNTs remains underexplored. This study investigates electroactive elastomeric composites fabricated with CNTs in two common diene rubbers: natural rubber (NR) and acrylonitrile-butadiene rubber (NBR), each with distinct functionalities.
View Article and Find Full Text PDFA High-Temperature and Wide-Permittivity Range Measurement System Based on Ridge Waveguide.
Sensors (Basel)
January 2025
School of Electronics and Information Engineering, Sichuan University, Chengdu 610064, China.
Potential applications of microwave energy, a developed form of clean energy, are diverse and extensive. To expand the applications of microwave heating in the metallurgical field, it is essential to obtain the permittivity of ores throughout the heating process. This paper presents the design of a 2.
View Article and Find Full Text PDFSymmetry Breaking as a Basis for Characterization of Dielectric Materials.
Sensors (Basel)
January 2025
University of Zagreb Faculty of Electrical Engineering and Computing, Unska 3, 10000 Zagreb, Croatia.
This paper introduces a novel method for measuring the dielectric permittivity of materials within the microwave and millimeter wave frequency ranges. The proposed approach, classified as a guided wave transmission system, employs a periodic transmission line structure characterized by mirror/glide symmetry. The dielectric permittivity is deduced by measuring the transmission properties of such structure when presence of the dielectric material breaks the inherent symmetry of the structure and consequently introduce a stopband in propagation characteristic.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!