AI Article Synopsis
Article Abstract
Sodium-ion batteries (SIBs) are expected to become alternatives to lithium-ion batteries (LIBs) as next-generation rechargeable batteries, owing to abundant sodium sources and low cost. However, SIBs still use liquid organic electrolytes (LOEs), which are highly flammable and have the tendency to leak. Although inorganic solid electrolytes (ISEs) and solid polymer electrolytes (SPEs) have been investigated for many years, given their higher safety level, neither of them is likely to be commercialized because of the rigidity of ISEs and the low room-temperature ionic conductivity of SPEs. During the last decade, composite polymer electrolytes (CPEs), composed of ISEs and SPEs, exhibiting both relatively high ionic conductivity and flexibility, have gained much attention and are considered as promising electrolytes. However, the ionic conductivities of CPEs are still unsatisfactory for practical application. Hence, this Review focuses on the principle of sodium ion conductors and particularly on recent investigations and development of CPEs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/cssc.202202152 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrochemical Performance of Guanidinium Salt-Added PVP/PEO Solid Polymer Electrolyte with Superior Power Density.
Polymers (Basel)
January 2025
School of Chemical Engineering, Yeungnam University, 280 Daehak-ro, Gyeongsan 38541, Republic of Korea.
Solid polymer electrolytes (SPEs) for symmetrical supercapacitors are proposed herein with activated carbon as electrodes and optimized solid polymer electrolyte membranes, which serve as the separators and electrolytes. We propose the design of a low-cost solid polymer electrolyte consisting of guanidinium nitrate (GuN) and poly(ethylene oxide) (PEO) with poly(vinylpyrrolidone) (PVP). Using the solution casting approach, blended polymer electrolytes with varying GuN weight percentage ratios of PVP and PEO are prepared.
View Article and Find Full Text PDFElectrochemical Switching of Laser-Induced Graphene/Polymer Composites for Tunable Electronics.
Polymers (Basel)
January 2025
Research School of Chemical and Biomedical Technologies, Tomsk Polytechnic University, Lenin Ave. 30, 634050 Tomsk, Russia.
Laser reduction of graphene oxide (GO) is a promising approach for achieving flexible, robust, and electrically conductive graphene/polymer composites. Resulting composite materials show significant technological potential for energy storage, sensing, and bioelectronics. However, in the case of insulating polymers, the properties of electrodes show severely limited performance.
View Article and Find Full Text PDFSterically Induced Enhancement in the Electrochemical Stability of Salen-Type Cathode Materials.
Polymers (Basel)
January 2025
Department of Chemistry, St. Petersburg University, Universitetskaya nab., 7/9, Saint Petersburg 199034, Russia.
This study investigates the electrochemical degradation mechanisms of nickel-salen (NiSalen) polymers, with a focus on improving the material's stability in supercapacitor applications. We analyzed the effects of steric hindrance near the nickel center by incorporating different bulky substituents into NiSalen complexes, aiming to mitigate water-induced degradation. Electrochemical performance was assessed using cyclic voltammetry, operando conductance, and impedance measurements, while X-ray photoelectron spectroscopy (XPS) provided insights into molecular degradation pathways.
View Article and Find Full Text PDFCellulose-Based Materials and Their Application in Lithium-Sulfur Batteries.
Polymers (Basel)
January 2025
Instituto de Investigaciones en Físico-Química de Córdoba (INFIQC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Córdoba 5000, Argentina.
Lithium-sulfur (Li-S) batteries are promising candidates for next-generation energy storage due to their high energy density, cost-effectiveness, and environmental friendliness. However, their commercialization is hindered by challenges, such as the polysulfide shuttle effect, lithium dendrite growth, and low electrical conductivity of sulfur cathodes. Cellulose, a natural, renewable, and versatile biopolymer, has emerged as a multifunctional material to address these issues.
View Article and Find Full Text PDFEnhanced Interfacial Contact and Lithium-Ion Transport in Ionic Liquid Polymer Electrolyte via In-Situ Electrolyte-Cathode Integration.
Molecules
January 2025
Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510641, China.
Solid polymer electrolytes (SPEs) have attracted much attention due to their excellent flexibility, strong interfacial adhesion, and good processibility. However, the poor interfacial contact between the separate solid polymer electrolytes and electrodes leads to large interfacial impedance and, thus, hinders Li transport. In this work, an ionic liquid-modified comb-like crosslinked network composite solid-state electrolyte with an integrated electrolyte/cathode structure is prepared by in situ ultraviolet (UV) photopolymerization.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!