The aim of this study is to compare surface roughness and microhardness changes of three monochromatic (Omnichroma, Vittra Unique, and Charisma Diamond One) and three universal shade (Neo Spectra ST, Gænial A'CHORD, and Nova Compo C) resin composites after exposure to simulated gastric acid. A total of 144 disc-shaped specimens (24 discs of each composite resin) were prepared using plexiglass molds ( = 5 mm × = 2 mm) for evaluation from each material. Specimens of each material were divided into two main groups for the evaluation of the microhardness and surface roughness and also two subgroups for 7- and 14-day exposures to simulated gastric acid. Initial microhardness and surface roughness measurements of all samples were measured before immersion (T1) followed by exposing the samples to simulated gastric acid for 7 days (T2) and 14 days (T3), and then, the microhardness and roughness measurements were repeated. Randomly selected specimens of each material for each of the time intervals (T1, T2, and T3) were evaluated with scanning electron microscopy (SEM). One-way ANOVA revealed that the surface roughness and hardness values of all tested composite resin restorative materials show no statistically significant difference for the initial (T1) value ( > 0.05). Regarding the 7 day (T2) and 14 day (T3) surface roughness and microhardness value of all composites, there are statistically significant differences between the groups ( < 0.05), while there was no statistically significant difference between the surface hardness reduction percentage between the time intervals ( > 0.05). As a result of this study, increase in surface roughness and decrease in microhardness of the tested universal composite materials when exposed to simulated gastric acid were statistically significant.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9812630 | PMC |
| http://dx.doi.org/10.1155/2022/9217802 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of chitosan-based films with invertase enzyme for active packaging: Physicochemical parameters, structure, application, and storage.
Int J Biol Macromol
January 2025
Department of Food Science, Federal University of Lavras (UFLA), Lavras 37200-000, Brazil.
The use of active packaging made from biodegradable polymers can contribute to the environment and to the food industry by increasing the shelf life of their products. This study aimed to produce chitosan-based films incorporated with the invertase enzyme (1, 2, 5, 9, and 10 %) as an alternative to avoid sucrose crystallization in the confectionery industry. The optimum activity of the invertase enzyme was observed at 55 °C and pH 5, thus, the films made with the film-forming solution adjusted to pH 5 and dried at 55 °C were compared with those without pH adjustment and dried at room temperature.
View Article and Find Full Text PDFSurface coating nanoarchitectonics for optimizing cytocompatibility and antimicrobial activity: The impact of hyaluronic acid positioning as the outermost layer.
Int J Biol Macromol
January 2025
Department of Chemistry, State University of Maringá, Maringá, PR, Brazil; Laboratory of Materials, Macromolecules, and Composites, Federal University of Technology - Paraná, Apucarana, PR, Brazil; National Institute for Materials Advancement, Pittsburg State University, Pittsburg, KS, USA; Department of Chemistry, Pittsburg State University, Pittsburg, KS, USA. Electronic address:
Polyelectrolyte multilayers (PEMs) based on hyaluronic acid (HA) and poly (diallyldimethylammonium chloride) (PDDA) were deposited on oxidized polystyrene (PS) via the layer-by-layer (LbL) method. The X-ray photoelectron spectroscopy (XPS) confirmed the PEM deposition on PS, and atomic force microscopy (AFM) indicated that the surface roughness of PS also increased after PEM deposition. The PEMs significantly enhanced PS wettability, reducing the contact angle from 73° on PS to 24° on PDDA-terminated (PDDA/HA) PEM (2.
View Article and Find Full Text PDFDesign of a Co doped carbon Backbone with self-grown Au nanoparticles via a 'Triple Advantage' Strategy for sensitive dopamine detection.
J Colloid Interface Sci
January 2025
State Key Laboratory of New Pharmaceutical Preparations and Excipients, Key Laboratory of Medicinal Chemistry and Molecular Diagnosis of the Ministry of Education, Key Laboratory of Analytical Science and Technology of Hebei Province, College of Chemistry and Materials Science, Hebei University 071002 Baoding, PR China. Electronic address:
In this study, a Co doped polyhedral carbon skeleton (Co CN) was prepared by nitrogen carbonization using ZIF-67 as a precursor. The Co CN features a rough surface with excellent electrical conductivity, and the Co atoms exhibit unique catalytic properties. Based on these characteristics, we used Co CN as a carrier to load Au nanoparticles (NPs) onto its surface through the linkage and reduction effects of polyoxometalates (POMs).
View Article and Find Full Text PDFPhysicochemical Properties of Curen® Filaments Versus Nylon Filaments in Toothbrush Bristles: An In Vitro Study.
Cureus
December 2024
Medical Affairs, Dr. Reddy's Laboratories Ltd., Hyderabad, IND.
Background Toothbrush manufacturers commonly use bristle materials such as nylon, polybutylene terephthalate, polypropylene, polyethylene terephthalate, boar hair, bamboo, carbon fiber, silicone, polylactic acid, or their modifications such as Curen. Nylon filaments have long been demonstrated to be durable and are widely used, but not much is known regarding the performance of Curen filaments compared to nylon filaments. This in vitro study compared the stiffness, abrasion potential, abrasion resistance, and bristle surface changes of Curen and nylon filaments.
View Article and Find Full Text PDFStudy on the effect of acid fracturing fluid on pore structure of middle to high rank coal.
Sci Rep
January 2025
College of Mining, Guizhou University, Guiyang, 550025, Guizhou, China.
Acid fracturing fluids can effectively improve the microporous structure of coal, thereby enhancing the permeability of coal seam and the efficiency of gas drainage. To explore the effects of acid fracturing fluids on the pore structure modification of coal samples from different coal ranks, hydrochloric acid-based acid fracturing fluids were prepared and used to soak four types of medium to high-rank coal in an experiment. High-pressure mercury intrusion and liquid nitrogen adsorption techniques results demonstrated that the acid fracturing fluid can effectively alter the pore structure of coal.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!