The family of molybdenum oxides has numerous advantages that make them strong candidates for high-value research and various commercial applications. The variation of their multiple oxidation states allows their existence in a wide range of compositions and morphologies that converts them into highly versatile and tunable materials for incorporation into energy, electronics, optical, and biological systems. In this review, a survey is presented of the most general properties of molybdenum oxides including the crystalline structures and the physical properties, with emphasis on present issues and challenging scientific and technological aspects. A section is devoted to the thermodynamical properties and the most common preparation techniques. Then, recent applications are described, including photodetectors, thermoelectric devices, solar cells, photo-thermal therapies, gas sensors, and energy storage.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1088/1361-648X/acb24a | DOI Listing |
Angew Chem Int Ed Engl
January 2025
University of Thessaly, Mechanical Engineering, Leoforos Athinon, Pedion Areos, 383 34, Volos, GREECE.
To accelerate the water dissociation in the Volmer step and alleviate the destruction of bubbles to the physical structure of catalysts during the alkaline hydrogen evolution, an integrated electrode of cobalt oxide and cobalt-molybdenum oxide grown on Ni foam, named CoO-Co2Mo3O8, is designed. This integrated electrode enhances the catalyst-substrate interaction confirmed by a micro-indentation tester, and thus hinders the destruction of the physical structure of catalysts caused by bubbles. Electrochemical testing shows the occurrence of a surface reconstruction of the integrated electrode, and CoO is transformed into Co(OH)2, denoted as Co(OH)2-Co2Mo3O8.
View Article and Find Full Text PDFMicromachines (Basel)
December 2024
Department of Mechatronic Engineering, Guangdong Polytechnic Normal University, Guangzhou 510665, China.
Transition metal oxides, distinguished by their high theoretical specific capacitance values, inexpensive cost, and low toxicity, have been extensively utilized as electrode materials for high-performance supercapacitors. Nevertheless, their conductivity is generally insufficient to facilitate rapid electron transport at high rates. Therefore, research on bimetallic oxide electrode materials has become a hot spot, especially in the field of micro-supercapacitors (MSC).
View Article and Find Full Text PDFJ Environ Sci (China)
July 2025
Guangdong Provincial Key Laboratory of Soil and Groundwater Pollution Control, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China; State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China; Shenzhen Key Laboratory of Precision Measurement and Early Warning Technology for Urban Environmental Health Risks, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China. Electronic address:
Rapid screening of inorganic arsenic (iAs) in groundwater used for drinking by hundreds of millions of mostly rural residents worldwide is crucial for health protection. Most commercial field test kits are based on the Gutzeit reaction that uses mercury-based reagents for color development, an environmental concern that increasingly limits its utilization. This study further improves the Molybdenum Blue (MB) colorimetric method to allow for faster screening with more stable reagents.
View Article and Find Full Text PDFNanomaterials (Basel)
January 2025
Department of Physics and Astronomy Athens, Ohio University, Athens, OH 45701, USA.
High-quality two-dimensional transition metal dichalcogenides (2D TMDs), such as molybdenum disulfide (MoS), have significant potential for advanced electrical and optoelectronic applications. This study introduces a novel approach to control the localized growth of MoS through the selective oxidation of bulk molybdenum patterns using Joule heating, followed by sulfurization. By passing an electric current through molybdenum patterns under ambient conditions, localized heating induced the formation of a molybdenum oxide layer, primarily MoO and MoO, depending on the applied power and heating duration.
View Article and Find Full Text PDFNano Lett
January 2025
School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian, Liaoning 116034, China.
Layered VO·6HO is a promising candidate for aqueous zinc batteries (AZBs) but with moderate electrochemical performances. Herein, the charge storage properties of VO·6HO are markedly improved by building up the heterointerface on its surface using amorphous molybdenum trioxide as the heteromaterial. The amorphous molybdenum trioxide functioning as the proton reservoir enables the proton-involved electrochemical reactions and induces the formation of a built-in electric field along the [001] orientation at the heterointerface constructed by the (001) plane of VO·6HO, which could provide new diffusion pathways and extra sites for ion storage.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!