This study evaluates field asphalt aging based on material property changes in pavement with time, and investigates if such changes could have an impact on field rutting performance. Four projects from three different climate zones were monitored as part of the NCHRP 9-49A project at two stages: during pavement construction and two to three years after opening it to traffic. Construction information were collected, and field cores were drilled at both stages to evaluate the material properties of recovered asphalt binder and asphalt mixture. Field rut depth was also measured. In addition, pavement structure, climate and base/subgrade modulus information were also obtained. Results indicate that the asphalt mixture stiffening is caused in major part by asphalt aging. However, the effect of asphalt aging on pavement mixture property may not follow a proportional liner trend. The parameters that are most sensitive to field ageing are MSCR and dynamic modulus. It is also found that the variables which showed a good ranking trend with the field rut depth are climate condition (relative humidity, high temperature hour, solar radiation), material properties (Hamburg rut depth, rutting resistance index, high temperature performance grade, MSCR, and dynamic modulus, base and subgrade moduli), as well as air voids.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9822228PMC
http://dx.doi.org/10.3390/ma16010225DOI Listing

Publication Analysis

Top Keywords

material properties
12
asphalt aging
12
rut depth
12
rutting performance
8
asphalt mixture
8
field rut
8
mscr dynamic
8
dynamic modulus
8
high temperature
8
asphalt
7

Similar Publications

Atomically precise metal nanoclusters (NCs) and metal-organic frameworks (MOFs) possess distinct properties that can present challenges in certain applications. However, integrating these materials to create new composite functional materials has gained significant interest due to their unique characteristics through a range of applications, particularly in catalysis. Considering MOFs as hosts and NCs as guests, several synergistic effects have been observed in composites, particularly in environmental catalytic reactions.

View Article and Find Full Text PDF

Particle filtration efficiency (PFE) is a critical property of face masks, with the most common test methods using sodium chloride as a challenge aerosol. In the absence of bottom-up uncertainty budgets for PFE, interlaboratory comparisons provide an alternative route to robustly quantify the precision and bias of the method. This work presents the results of several interlaboratory comparisons of particle filtration efficiency performed across a network of laboratories.

View Article and Find Full Text PDF

Aim: Calcium silicate-based cements have been widely used in dentistry mainly due to their physicochemical and biological properties. Commercially available materials use radiopacifiers containing metals (bismuth, tantalum, tungsten and/or zirconium). To investigate volumetric changes, in vivo biocompatibility and systemic migration from eight commercially available materials, including powder/liquid and 'ready-to-use' presentations.

View Article and Find Full Text PDF

Systematic evaluation of adhesives for implant fixation in multimodal functional brain MRI.

MAGMA

January 2025

Translational Research Imaging Center (TRIC), Clinic of Radiology, University of Münster, Albert-Schweitzer-Campus 1, building A16, 48149, Münster, Germany.

Objective: Invasive multimodal fMRI in rodents is often compromised by susceptibility artifacts from adhesives used to secure cranial implants. We hypothesized that adhesive type, shape, and field strength significantly affect susceptibility artifacts, and systematically evaluated various adhesives.

Materials And Methods: Thirty-one adhesives were applied in constrained/unconstrained geometries and imaged with T2*-weighted EPI at 7.

View Article and Find Full Text PDF

Wearable Biodevices Based on Two-Dimensional Materials: From Flexible Sensors to Smart Integrated Systems.

Nanomicro Lett

January 2025

Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, People's Republic of China.

The proliferation of wearable biodevices has boosted the development of soft, innovative, and multifunctional materials for human health monitoring. The integration of wearable sensors with intelligent systems is an overwhelming tendency, providing powerful tools for remote health monitoring and personal health management. Among many candidates, two-dimensional (2D) materials stand out due to several exotic mechanical, electrical, optical, and chemical properties that can be efficiently integrated into atomic-thin films.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!