Objective: Investigating the impact of different pretreatment methods, attachment materials and aging regimens on shear bond strength (SBS) between zirconia and indirectly bonded brackets using CAD/CAM transfer trays.
Methods: Zirconia substrates were conditioned with silica coated alumina (CoJet) and a) Clearfil Ceramic Primer Plus (CF), b) RelyX Ceramic Primer (RXP), c) Futurabond U (FU). Brackets were virtually placed, transfer tray designed (OnyxCeph) and 3D-printed for indirect bonding with a) Transbond LV (TBL), b) Nexus NX3 (NX3), c) Maximum Cure (MC). SBS testing was performed with a universal testing machine after 24 h, 500 thermal cycles, 90 d. Directly bonded brackets to human enamel using Transbond XT Adhesive served as control. The adhesive remnant index (ARI) was evaluated. Data was analyzed with Shapiro-Wilk, Kruskal-Wallis and Dunn's post-hoc test with Bonferroni correction, Chi test (p < 0.05), and the Weibull modulus was calculated.
Results: SBS ranged from 0.1 to 15.5 MPa and were influenced mostly by the attachment material. NX3 generally showed the highest values (9.5-15.8 MPa). Initially RXP/TBL and FU/TBL presented the lowest values (4.3/4.8 MPa). Aging regimens reduced SBS of MC irrespective of pretreatment, after 90 d values ranged from 0.1 to 0.9 MPa. ARI 1 was predominant in all MC groups and FU/NX3, 2 and 3 in the other groups. Weibull moduli ranged between 0.15 (MC/RXP/500 TC) and 6.24 (NX3/RXP/500 TC).
Significance: MC seems not to be suitable for indirect bonding using CAD/CAM transfer trays to zirconia. NX3 showed similar SBS values compared to the control, TBL lower.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.dental.2022.12.006 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Effect of Thermocycling on the Shear Bond Strength of Flash-free Brackets and Healing Dynamics of Enamel Microcracks: An Study.
J Contemp Dent Pract
September 2024
Department of Orthodontic, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.
Aim: This study evaluates long-term shear bond strength (SBS) and enamel micro cracks (MCs) healing after using adhesive pre-coated brackets (APC).
Materials And Methods: A total of eighty extracted human premolar teeth were randomly divided into four experimental groups ( = 20 per group): Control group: Teeth underwent indentation but no bracket bonding; group II : Teeth were subjected to indentation without exposure to thermocycling; group III: Teeth experienced both indentation and thermocycling; group IV: No indentation was applied to the teeth; groups III and IV were further divided into two subgroups to simulate different clinical timelines: Subgroup A (n = 10): Teeth underwent 5,000 thermocycles, equivalent to six months of clinical use. Subgroup B (n = 10): Teeth were subjected to 10,000 thermocycles, representing 12 months of use.
Microleakage under metal and ceramic brackets after acid etch or laser surface treatment before bonding: An in vitro study.
J Orthod
January 2025
Department of Oral Biology, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt.
Aim: To compare microleakage beneath ceramic and metal brackets prepared with either acid etching or laser conditioning.
Design: An in vitro study.
Setting: Department of Orthodontics, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt.
Influence of orthodontic bracket block-out materials on superimposition errors when substituting scanned dental imaging data onto computed tomography images.
Imaging Sci Dent
December 2024
Department of Oral and Maxillofacial Surgery, College of Dentistry, Yonsei University, Seoul, Korea.
Purpose: The study was performed to examine the error associated with image superimposition when computed tomography (CT) images of the dental region are substituted with dental scan data, according to the block-out material used in dental impressions.
Materials And Methods: A typodont model was created by bonding orthodontic brackets to teeth on plaster dental stones using melted dental base-plate wax. In the experiment, 2 groups were compared: one using wax and the other using putty as the block-out material to prevent tearing of the impression material during the acquisition of dental impressions.
Evaluation of Microleakage in Flash-Free and Conventional Ceramic Brackets: A Microcomputed Tomography Study.
Turk J Orthod
December 2024
Hatay Mustafa Kemal University Faculty of Dentistry, Department of Orthodontics, Hatay, Turkey.
Objective: The aim of this study was to evaluate and compare microleakage under the conventional and flash-free ceramic brackets bonded with different agents.
Methods: Forty extracted human maxillary premolar teeth were randomly divided into five groups. According to the groups, adhesive coated and conventional bracket systems were bonded to the tooth surfaces with the specified adhesive agents.
Shear bond strength and ARI scores of metal brackets to glazed glass ceramics and zirconia: an in vitro study investigating surface treatment protocols.
BMC Oral Health
December 2024
Faculty of Dentistry, Innovative Dental Materials and Interfaces Research Unit (URB2i), UR 4462, Paris Cité University, 1 rue Maurice Arnoux, Montrouge, 92120, France.
Objective: To evaluate the shear bond strength (SBS) and adhesive remnant index (ARI) scores of metal brackets to glazed lithium disilicate reinforced glass-ceramics and zirconia according to various surface treatment protocols.
Methods: A total of 240 lithium disilicate ceramic (LD) and 240 zirconia (Zr) blocks were randomly divided according to sandblasting, hydrofluoric acid (HF) etching, universal primer use, and the adhesive system applied. A maxillary canine metal bracket was bonded to each sample with resin cement (Transbond XT, TXT).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!